Outsunny 845-031V02BN Metal Storage Shed Garden Tool House Instruction Manual

: August 5, 2024
: Outsunny

Table of Contents

Outsunny 845-031V02BN Metal Storage Shed Garden Tool House
Product Usage Instructions
Tools Recommended
Care & Maintenance
PARTS
ASSEMBLY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Outsunny 845-031V02BN Metal Storage Shed Garden Tool House

Specifications :

Product Model: IN230900363V01_GL
Recommended Tools: GC, P5, GE, P6, P7
Quantity: Various parts with different quantities

Product Usage Instructions

Tool Setup :

Use the recommended tools: GC, P5, GE, P6, P7.
Refer to the part list to ensure you have all the necessary components.

Assembly Steps :

Start by identifying the corresponding parts based on the part list.
Follow the numerical order for assembly as indicated in the manual.
Securely tighten screws but avoid over-tightening as specified.
Pay attention to specific part orientations and configurations.
Consult illustrations if needed for clarity on assembly steps.

Installation Tips :

Gently lift part 19 before screwing it for installation.

Frequently Asked Questions (FAQ):

Q: What are the recommended tools for assembly?
A: The recommended tools for assembly include GC, P5, GE, P6, and P7.
Q: How should I tighten the screws during assembly?
A: It is important to securely tighten the screws but avoid over-tightening as specified in the manual to prevent damage to the parts.
Q: Are there any specific installation tips to follow?
A: Yes, one of the installation tips is to gently lift part 19 before screwing it during installation.

IN230900363V01_GL
IN230900363V01_GL_845-031V02BN_845-031V02GY_845-031V02SR

Tools Recommended

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Dear customer,
Thank you for purchasing this product. So that your appliance serves you well, please read all the instructions in this user’s manual. If you have any questions, please contact our customer care center. Our contact details are below:
us 001-877-644-9366
customerservice@aosom.com

ASSEMBLY PREPARATION
Please check local building codes regarding footings, location and other requirements before beginning construction. Study and understand this owner’s manual of important information and helpful tips for easier and more enjoyable assembly.

Assembly instructions

Reviewing all instructions and the appropriate information before you begin, make sure following the step sequence carefully for successful results.
Flooring base:
The site must be prepared so that the base of the shed is level all round and checking with a spirit level is required.
The base can be constructed by treated timber or concrete,in order to stop the moisture getting into the shed,The shed is not designed to be built onto lawn directly.Also the ground will get muddy during rainy days.
If a concrete pad is made,it is important that this slopes towards the edges to prevent water ingress.Time must be allowed for any concrete or cement to dry before building the shed on top.
Bases can also be constructed from bricks,blocks,or mounted on a concrete pad.
The bricks or blocks should be cemented onto firm and level concrete footings and the greenhouse frame drilled and screwed to the base.

Parts and Parts List

Before you start, separate and identify all the parts and hardware to be sure that you have all the necessary parts for your building (refer to the Parts List Page).
Do not attempt to assemble the building if parts are missing because any building left partially assembled may be seriously damaged by light winds.

Safety must be put in the No. 1 position:

Select a dry and calm day for your assembly. Team works ( Two or more people ) are required during the assembly;
Wearing safety gloves, eye protection and long sleeves during the assembly to prevent injury; Pay attention to the sharp edge of some parts;
Children and pets are not allowed entering into the construction site;
Never concentrate your total weight on the roof of the building. When using a step ladder make sure that it is safety;

Care & Maintenance

Keep the shed clean with soft cloth, use water if necessary;
Keep the door tracks clear of dirt and other stuff that prevent them from sliding easily.
Clean the snow with necessary tools to make sure it is safe to enter into; Heavy snow may cause collapse, please make sure safety before entering into. 4 The shed is not made for living but storing stuff.