Haier HOR54S5CW1 Freestanding Electric Cooker User Manual
- August 3, 2024
- Haier
Table of Contents
- Haier HOR54S5CW1 Freestanding Electric Cooker
- DEAR CUSTOMER
- SAFETY INSTRUCTIONS
- HOW TO SAVE ENERGY
- DISPOSAL OF THE APPLIANCE
- DESCRIPTION OF THE APPLIANCE
- INSTALLATION
- OPERATION
- CLEANING AND MAINTENANCE
- OPERATION IN CASE OF EMERGENCY
- BAKING IN THE OVEN
- TECHNICAL INFORMATION
- ELECTRICAL CONNECTION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Haier HOR54S5CW1 Freestanding Electric Cooker
DEAR CUSTOMER
- The cooker is exceptionally easy to use and extremely efficient. After reading the instruction manual, operating the cooker will be easy.
- Before being packaged and leaving the manufacturer, the cooker was thoroughly checked for safety and functionality.
- Before using the appliance, please read the instruction manual carefully.
- By following these instructions carefully you will be able to avoid any problems in using the appliance.
- It is important to keep the instruction manual and store it in a safe place so that it can be consulted at any time.
- It is necessary to follow the instructions in the manual carefully to avoid possible accidents.
Caution!
- Do not use the cooker until you have read this instruction manual.
- The cooker is intended for household use only.
- The manufacturer reserves the right to introduce changes that do not affect the operation of the appliance.
SAFETY INSTRUCTIONS
- The appliance becomes hot during operation. Take care not to touch the hot parts inside the oven.
- Always keep children away from the cooker. While in operation direct contact with the cooker may cause burns!
- Ensure that small items of household equipment, including connection leads, do not touch the hot oven or the hob as the insulation material of this equipment is usually not resistant to high temperatures.
- Do not leave the cooker unattended when frying. Oils and fats may catch fire due to overheating.
- Do not allow the cooktop to get soiled and prevent liquids from boiling over onto the surface of the cooktop, Any spillages should be cleaned up as they happen.
- Do not place pans with a wet bottom on the warmed-up heating zones as this can cause irreversible changes to the cooktop(irremovable stains).
- Do not switch on the cooktop until a pan has been placed on it.
- Do not put pans weighing over 15kg on the opened door of the oven and pans over 25kg on the cooktop.
- Do not use harsh cleaning agents or sharp metal objects to clean the doors as they can scratch the surface, which could then result in the glass cracking.
- Do not use the cooker in the event of a technical fault. Any faults must be fixed by an appropriately qualified and authorized person.
- In the event of any incident caused by a technical fault, disconnect the power and report the fault to the service center to be repaired.
- The rules and provisions contained in this instruction manual should be strictly observed. Do not allow anybody who is not familiar with the contents of this instruction manual to operate the cooker.
- The cooker should not be cleaned using steam equipment.
- WARNING: Accessible parts may become hot during use. Young children should be kept away.
- WARNING: To prevent accidental tipping of the appliance, for example by a child climbing onto the open door, the stabilizing means must be installed.
- The oven must be switched off before removing the guard and, after cleaning, the guard must be replaced by the instructions.
- Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.
- WARNING: Accessible parts will become hot when the grill is in use . Children should be kept away.
- The appliance is not intended to be operated using an external timer or a separate remote-control system.
- This appliance is not intended for use by persons (including children) with reduce physical, sensory, or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer its service agent, or a similarly qualified person to avoid a hazard. If the appliance is used in New Zealand, this cooking range must be connected to the supply by a supply cord fitted with an appropriately rated plug that is compatible with the socket-outlet fitted to the final sub-circuit in the fixed wiring that is intended to supply this cooking range.
HOW TO SAVE ENERGY
Responsibly using energy not only saves money but also helps the environment. So let’s save energy! And this is how you can do it:
- Use proper pans for cooking. Pans with thick, flat bases can save up to 1/3 of electric energy. Remember to cover pans if possible otherwise, you will use four times as much energy!
- Match the size of the saucepan to the surface of the heating plates. A saucepan should never be smaller than a heating plate.
- Ensure heating plates and pan bases are clean. Soils can prevent heat transfer and repeatedly burnt spillages can often only be removed by-products that cause damage to the environment.
- Do not uncover the pan too often(a watched pot never boils!). Do not open the oven door unnecessarily often.
- Switch off the oven in good time and make use of residual heat. For long cooking times, switch off heating zones 5 to 10 minutes before finishing cooking. This saves up to 20% on energy.
- Only use the oven when cooking larger dishes.
- The meat of up to 1 kg can be prepared more economically in a pan on the cooker burner.
- Make use of residual heat from the oven. If the cooking time is greater than 40 minutes it is recommended to switch off the oven 10 minutes before the end time.
Caution!
When using the timer set appropriately shorter cooking times according to
the dish being prepared.
- Only grill with the ultrafine after closing the oven door.
- Make sure the oven door is properly closed. Heat can leak through spillages on the door seals. Clean up any spillages immediately.
- Do not install the cooker in the direct vicinity of refrigerators/freezers. Otherwise, energy consumption increases unnecessarily.
UNPACKING
During transportation, protective packaging was used to protect the
appliance against any damage.
After unpacking, please dispose of all elements of the packaging in a way that will not cause damage to the environment. All materials used for packaging the appliance are environmentally friendly; they are 100% recyclable and are marked with the appropriate symbol.
Caution!
During unpacking, the packaging materials (polythene bags, polystyrene
pieces, etc.) should be kept out of reach of children.
DISPOSAL OF THE APPLIANCE
Old appliances should not simply be disposed of with normal household waste
but should be delivered to a collection and recycling center for electric and
electronic equipment. A symbol shown on the product, the instruction manual,
or the packaging shows if it is suitable for recycling.
Materials used inside the appliance are recyclable and are labeled with
information concerning this. By recycling materials or other parts from used
devices you are making a significant contribution to the protection of our
environment. Information on appropriate disposal centers for used devices can
be provided by your local authority.
DESCRIPTION OF THE APPLIANCE
- Temperature control knob
- Oven function selection knob
- 3,4,5,6 Hotplate control knobs
- Cooker operation signal light orange
- Oven temperature signal light orange
- Oven door handle
- Drawer
- Hotplate
INSTALLATION
Installing the cooker
- The kitchen should be dry and airy and have effective ventilation according to the existing technical provisions.
- The room should be equipped with a ventilation system that pipes away exhaust fumes created during combustion. This system should consist of a ventilation grid or hood. Hoods should be installed according to the manufacturer’s instructions. The cooker should be placed to ensure free access to control elements.
- Coating or veneer used on fitted furniture must be applied with a heat-resistant adhesive (100℃). This prevents surface deformation or detachment of the coating. If you are unsure of your furniture’s heat resistance, you should leave approximately 2 cm of free space around the cooker. The wall behind the cooker should be resistant to high temperatures. During operation, its back side can warm up to around 50℃ above the ambient temperature.
- The cooker should stand on a hard, even floor (do not put it on a base.
- Before you start using the cooker it should be leveled, which is particularly important for fat distribution in a frying pan. To this purpose, adjustable feet are accessible after the removal of the drawer. The adjustment range is +/-5mm.
- Take the cover and cooker out of the packaging. Select a proper place, and steadily level the cooker.
Fix the cooker to the back wall with 2 chains
To fit the rear panel/splashback, slide the lugs on the bottom of the panel into the matching slots on the rear of the stove and fix them with the screws provided.
OPERATION
Before first use
- Remove the packaging and empty the drawer. Clean the interior of the oven with warm soapy water and wipe clean with a moistened cloth or sponge. Wipe clean the cooktop.
- Take out and wash the oven fittings with warm water and a little washing-up liquid.
- Switch on the ventilation in the room or open a window.
- Heat the oven (to a temperature of 250, for approx. 30 min.), remove any stains, and wash carefully. The hotplates should be heated for around 4 minutes without a pan or pot on them.
- When heating the oven for the first time it is normal for the stove to give off smoke and manufacturing odors These will disappear after about 30 Minutes.
Using the hotplates
The level of heat can be adjusted gradually by turning the appropriate knob to
the right or left. Switching on the plate results in a red signal light on the
control panel turning on.
An appropriately selected pan saves energy. A pan should have a thick, flat base with a diameter equal to the plate diameter, as in that case heat is transferred most efficiently.
Use
- Do not use pots and pans that are unsteady and likely to rock or overbalance.
- Do not operate the cooktop for an extended time without utensils on the hotplate.
Caution!
- Ensure the plate is clean – a soiled zone does not transfer all of the heat.
- Protect the plate against corrosion.
- Switch off the plate before a pan is removed.
- Do not leave pans with prepared dishes based on fats and oils unattended on the switched-on plate; hot fat can spontaneously catch fire.
Oven functions and operation
The oven is controlled by the function knob, timer knob, and the
temperature selection knob.
Caution!
When selecting any heating function (switching a heater on etc.) the oven
will only be switched on after the temperature has been set by the temperature
regulator knob.
Possible settings of the oven function knob
Caution!
At this oven function knob position. The oven is not being warmed up.
Classic convection (Bottom Heat + Top Heat)
Setting the knob to this position allows the oven to be heated conventionally.
Separate oven lighting
By setting the knob to this position the lighting inside the oven is switched
on
Base Heat (Bottom heater)
At this oven function knob position, the oven activates the bottom heater.
Top element
At this oven function knob position, the oven activates the top element.
Static Grill (Double Grill)
When the “combined grill” is active it enables grilling with the grill and
with the top heater switched on at the same time. This function allows a
higher temperature at the top of the cooking area, which causes more intense
browning of the dish and permits larger portions to be grilled.
Use of the grill
To switch on the grill you need to:
- Set the oven knob to the position marked grill.
- Heat the oven for approx. 5 minutes(with the oven door shut).
- Insert a tray with a dish onto the appropriate cooking level, and if you are grilling on the grate insert a tray for dripping on the level immediately below (under the grate).
- Close the oven door.
For grilling with the function grill and combined grill, the temperature must be set to 250℃.
Warning!
- When using the grill function it is recommended that the oven door is closed.
- When the grill is in use accessible parts can become hot.
- It is best to keep children away from that is best to keep children away from the oven.
Oven guide levels
Baking pans and accessories (oven grid, baking tray, etc) may be inserted into
the oven in 5 guiding levels. Appropriate levels are indicated in the tables
that follow. Always count levels from the bottom upwards!
CLEANING AND MAINTENANCE
By ensuring proper cleaning and maintenance of your oven you can have a significant influence on the continuing fault-free operation of your appliance. Before you start cleaning, the oven must be switched off and you should ensure that all knobs are set to the “0” position. Do not start cleaning until the oven has completely cooled.
Oven
- The oven should be cleaned after every time use.
- Cool the oven completely before cleaning.
- Never clean the appliance with a pressurized hot steam cleaner!
- The oven chamber should only be washed with warm water and a small amount of washing-up liquid.
Steam cleaning
- pour 250ml of water (1 cup) into a bowl placed in the oven on the first level from the bottom.
- Close the oven door,
- Set the temperature knob to 50 ℃, and the function knob to the bottom heater position, heat the oven chamber for approximately 30 minutes,
- Open the oven door, wipe the chamber inside with a cloth or sponge, and wash using warm water with washing-up liquid.
- After cleaning the oven chamber wipe it dry.
Caution!
Do not use cleaning products containing abrasive materials for the cleaning
and maintenance of the glass front panel.
Cleaning of Solid Hotplates
- For light soiling and everyday cleaning simply wipe with a moist cloth.
- For dirty hotplates use a commercial cleaner.
- Be careful to completely remove the cleaner and dry the hotplate by running the element for a short time.
- The hotplate can be then oiled with a thin coating of cooking oil or a suitable commercial product such as Hillmark Shineon.
- Some discoloration of the trim ring is normal during use.
Changing the Oven Lamp
Before any maintenance is started involving electrical parts, the appliance
must be disconnected from the power supply. If the oven has been in use, let
the oven cavity and the heating elements cool down before attempting any
maintenance.
Changing the bulb
- Unscrew the protective cover. We recommend that you wash and dry the glass cover at this point.
- Carefully remove the old bulb and insert the new bulb suitable for high temperatures (300ºC) having the following specifications: 220-240V, 50Hz, 25W, G9 fitting.
- Refit the protective cover.
IMPORTANT
Never use screwdrivers or other utensils to remove the light cover. This could
damage the enamel of the oven or the lampholder. Remove only by hand.
IMPORTANT
Never replace the bulb with bare hands as contamination from your fingers can
cause premature failure. Always use a clean cloth or gloves.
Please note: The bulb replacement is not covered by your guarantee
Door removal
In order to obtain easier access to the oven chamber for cleaning, it is
possible to remove the door. To do this, tilt the safety catch part of the
hinge upwards. Close the door lightly, lift and pull it out towards you. To
fit the door back onto the cooker, do the reverse. When fitting, ensure that
the notch of the hinge is correctly placed on the protrusion of the hinge
holder. After the door is fitted to the oven, the safety catch should be
carefully lowered down again. If the safety catch is not set it may cause
damage to the hinge when closing the door.
Tilting the hinged safety catches
- Removal of the internal glass panel
Unscrew and unfasten the plastic latch that is in the corner at the top of the door. Next, take out the glass from the second blocking mechanism and remove it. After cleaning, insert and block the glass panel, and screw in the locking mechanism.
Regular inspections
Besides keeping the cooker clean, you should:
- Carry out periodic inspections of the control elements and cooking units of the cooker. After the guarantee has expired you should have a technical inspection of the cooker carried out at a service centre at least once every two years.
- Fix any operational faults.
- Carry out periodical maintenance of the cooking units of the cooker.
Caution!
All repairs and regulatory activities should be carried out by the
appropriate service center or by an appropriately authorized fitter.
OPERATION IN CASE OF EMERGENCY
In the event of an emergency, you should:
- switch off all working units of the oven
- disconnect the mains plug
- call the service center
- some minor faults can be fixed by referring to the instructions given in the table below. Before calling the customer support center or the service center check the following points that are presented in the table.
PROBLEM | REASON | ACTION |
---|---|---|
1. The appliance does not work. | Break in power supply. | **Check |
the household fuse box; if there is a blown fuse replace it**
with a new one
2. The oven lighting does not work.| ****
The bulb is loose or damaged.
| Tighten up or replace the blown
bulb ( see Cleaning and Maintenance )
BAKING IN THE OVEN
Baking cakes and loaves The Centre shelf position is most suitable for baking most cakes and loaves.
Warning!
- The baking parameters given in the Tables are approximate and can be corrected based on your own experience and cooking preferences.
- In case you may not find any particular type of cake in the tables, use the information available for the next most similar type of cake.
- Whenever possible choose dark baking pans. Light ones reflect the heat and sometimes the cake will not be properly browned.
- Always place baking pans directly on wire shelves. For baking biscuits in the tray, remove the wire grid from the tray supplied.
- Preheating shortens the baking time. Do not put the cake in the oven until the proper temperature is obtained.
Baking tips
Is the cake baked?
Pierce the cake with a fine skewer at the thickest part, if the dough does not
stick to it, the cake is baked. You may switch off the oven and use the
remaining heat.
Cake has fallen
Check the recipe. Use less fluid next time. Follow the mixing times,
especially when using powered kitchen mixers.
The cake is too light on the bottom
Use a dark baking pan next time, or place the pan one level lower, or switch
on the lower heater a while before the completion.
Cheesecake is undercooked
Next time reduce the baking temperature and extend the baking time.
Warnings regarding the baking tables
- The tables indicate the temperature range. Always select lower temperature first. You may always increase the temperature in case the pastry needs more baking.
- Baking times are indicative only. They may vary in dependence on individual characteristics.
- The asterisk indicates that the oven requires preheating.
Pastry Baking Table
Type of pastry| Shelf Position (from down upwards)| Temp ( ℃)
| Baking time
(in min.)
---|---|---|---
Sweet pastry| | |
Raisin cake| 2| 150-160| 55-70
Ring cake| 2| 150-160| 60-70
Tree cake (tart
form)
| 2| 150-160| 45-60
Cheesecake
(tart form)
| 3| 160-170| 60-80
Fruit cake| 3| 170-180| 50-70
Fruit cake with
icing
| 3| 160-170| 60-70
Sponge cake| 2| 160-170| 30-40
Flake cake| 3| 170-180| 25-35
Fruit cake mix
dough
| 3| 160-170| 50-70
Cherry cake| 3| 170-200| 30-50
Jelly roll| 3| 170-180| 15-25
Fruit fan| 3| 150-160| 25-35
Plait bun| 3| 180-210| 35-50
Christmas cake| 3| 170-200| 45-70
Apple pie| 3| 170-200| 40-60
Puff paste| 3| 160-170| 40-60
Salted pastry| | |
Bacon roll| 3| 170-180| 45-60
Pizza| 3| 210-230| 30-45
Bread| 3| 180-210| 50-60
Rolls| 3| 200-220| 30-40
Cookies| | |
Caraway roll| 3| 160-170| 15-25
Biscuits| 3| 160-170| 20-30
Danish pastry| 3| 170-200| 20-35
Flaky pastry| 3| 180-200| 20-30
Cream puff| 3| 170-200| 25-45
Deep frozen
pastry
| | |
Apple pie,
cheese pie
| 3| 170-200| 50-70
Cheesecake| 3| 170-180| 65-85
Pizza| 3| 200-220| 20-30
Chips for oven| 3| 200-220| 20-35
Potato fries for| 3| 200-220| 20-35
Roasting
Tips regarding roasting pans
- Cover your roast or wrap it in foil. It will preserve its juice and the oven will remain cleaner.
- If you leave the pan uncovered the roast will be cooked sooner. Roast large chunks of meat directly on the grid, with an intercepting pan underneath.
Attention when roasting!
Roasting tables indicate suggested temperatures, guides, and roasting times.
Roast time largely depends upon the type of meat, its size, and its quality.
So you may expect some variations.
- Roasting of large chunks of meat may produce excessive steaming and dew formation at the oven door. This is quite normal and does not affect the operation of the oven.
- However, after the completion of roasting wipe the oven door and the glass thoroughly.
- Roasting of red meat, poultry, and fish is rational if the roast exceeds one kilogram in size.
- Add as much liquid as necessary to prevent the burning of juice, dripping from neat. Roast must be surveyed at all times.
- And the liquid is added if necessary.
- At approximately the middle of the indicated time turn the roast round, especially if you use the deep roast dish.
- When roasting on the grill grid, place the grid in the deep roasting pan and insert both into the sliding guide. The bottom pan will intercept dripping fat.
- Never leave roast to cool in the oven, as it might produce dew and corrosion of the oven.
Roasting table
Type of meat| Weight
(in kg)
| Shelf position
(from down upwards)
| temp
(℃)
| Roasting time
( in min. )
---|---|---|---|---
Beef| | | |
Beef loin| 1.0| 2| 200-220| 100-120
Beef loin| 1.5| 2| 200-220| 120-150
Roast beef,
rare
| 1.0| 2| 220-230| 30-40
Roast beef,
well done
| 1.0| 2| 220-230| 40-50
Pork| | | |
Pork roast with
skin
| 1.5| 2| 170-180| 140-160
Flank| 1.5| 2| 180-190| 120-150
Flank| 2.0| 2| 170-200| 150-180
Pork loin| 1.5| 2| 200-220| 120-140
Meat roll| 1.5| 2| 200-220| 120-140
Pork cutlet| 1.5| 2| 170-200| 100-120
Minced meat
roast
| 1.5| 2| 210-220| 60-70
Veal| | | |
Veal roll| 1.5| 2| 170-200| 90-120
Veal knuckle| 1.7| 2| 170-200| 120-130
Lamp| | | |
Lamp prime
ribs
| 1.5| 2| 180-200| 100-120
Mutton blade
bone
| 1.5| 2| 180-200| 120-130
Venison| | | |
Hare ribs| 1.5| 2| 180-210| 100-120
Hare blade
bone
| 1.5| 2| 180-210| 100-120
Boar ham| 1.5| 2| 180-210| 100-120
Poultry| | | |
Chicken entire| 1.2| 2| 200-210| 60-70
Hen| 1.5| 2| 200-210| 70-90
Duck| 1.7| 2| 170-200| 120-150
Goose| 4.0| 2| 150-160| 180-200
Turkey| 5.0| 2| 140-150| 180-240
Fish| | | |
Fish, entire| 1.0| 2| 200-210| 50-60
Fish soufflé| 1.5| 2| 170-200| 50-70
Grilling
- Take extra precautions when grilling. Intensive heat from the infrared heater makes the oven and the accessories extremely hot. Use protective gloves and barbecue accessories!
- The perforated roast may produce spurting of hot grease(sausages). Use long grill tongs to prevent skin burns and protect your eyes.
- Supervise the grill at all times. Excessive heat may quickly burn your roast and provoke fire!
- Do not let the children in the vicinity of the grill.
The grill heater is especially suitable for the preparation of low-fat sausages, meat, fish fillets, and steaks, and for browning and crisping the roast skin.
Tips for grilling
- Grilling should be carried out with the oven door closed.
- Grilling tables indicate the recommended temperature, guide levels, and grilling times, which may vary according to the weight and quality of the meat.
- The grill heater should be pre-heated for 3 minutes.
- Oil the grill grid before placing the food, otherwise, the food might stick to the grid.
- Place the meat upon the grid, then place the grid upon the grease interception pan. Insert both trays into the oven guides.
- Turn the meat around after half of the grilling time has expired. Thinner slices will require only one turn, for larger chunks you might need to repeat the procedure. Always use barbecue tongs to avoid losing excessive juice from meat.
- Dark beef meat is grilled quicker than lighter pork or veal.
- Clean the grill, the oven, and the accessories each time after use.
Grill table
Type of meat for grill| Weight (in grams)| Shelf position (from
bottom up)
| Temp (℃)
| Grill time (in min.)
---|---|---|---|---
Meat and sausages| | | |
2 beefsteaks, rare| 400| 5| 240| 14-16
2 beefsteaks, medium| 400| 5| 240| 16-20
2 beefsteaks, well done| 400| 5| 240| 20-23
2 pork scrag fillets| 350| 5| 240| 19-23
2 pork chops| 400| 5| 240| 20-23
2 veal staeks| 700| 5| 240| 19-22
4 lamb cutlets| 700| 5| 240| 15-18
4 grill sausages| 400| 5| 240| 9-14
2 slices of meat cheese| 400| 5| 240| 9-13
1 chicken, halved| 1400| 3| 240- 250|
28-33(1.side)
23-28(2.side.)
Fish| | | |
Salmon fillets| 400| 4| 240| 19-22
Fish in aluminium foil| 500| 4| 230| 10-13
Toast| | | |
4 slices of white bread| 200| 5| 240| 1,5- 3
2 slices of whole meal| 200| 5| 240| 2-3
Toast sandwich| 600| 5| 240| 4-7
Meat/poultry| | | |
Chicken| 1000| 3| 180-200| 60-70
Pork roast| 1500| 3| 160-180| 90-120
Pork scrag| 1500| 3| 160-180| 100-180
Pork knuckle| 1000| 3| 160-180| 120-160
Roast beef/ beef fillet| 1500| 3| 190-200| 40-80
TECHNICAL INFORMATION
TYPE | HOR54S5CW1 |
---|---|
Dimensions (height/width/depth) cm | 90/54/60 |
Oven
Temperature regulator / function mode switch| 1/1
Guide levels| 5
Top/bottom heater(kW)| 0.85/1.15
Grill heater(kW)| 1.1
Oven illumination(W)| 25
Function modes
Top/bottom heater(kW)| 2.0
bottom heater(kW)| 1.15
Top heater(kW)| 0.85
Separate oven lighting
(W)
| 25
Bottom heater/fan(KW)| –
Top/grill (kW)| 1.95
Grill heater(kW)| –
Max. temperature| 250 ℃
Electric connection| 220-240V/380-415 V
3N~,50Hz
Nominal voltage of
heaters
| 220-240V
Total connected
power(kW)
| 7.5
Oven total(kW)| 2
Hotplate total(kW)| 5.5
Complies with AS/NZS regulations EN 50304, AS/NZS60335-1,AS/NZS60335-2-6 standards.
ELECTRICAL CONNECTION
Caution!
All electrical work should be carried out by a suitably qualified and
authorized electrician. No alterations or willful changes in the electricity
supply should be carried out. The fixing line connected must be equipped with
the all-pole disconnection device provided by breakaway the contact under
overvoltage category III according to the the wiring rules.
Fitting guidelines
The cooker is manufactured to work with a three-phase alternating current
(380-415V 3N~50 Hz). The voltage rating of the cooker heating elements is
220-240V. Adapting the cooker -to operate with one phase current is possible
by appropriate bridging in the connection box box according to the connection
diagram below. The connection diagram is also found on t he cover of the
connection box. Remember that the connection wire should match the connection
type andthe power rating of the cooker.
The connection cable must be secured in a strain-relief clamp.
Caution!
Remember to connect the safety circuit to the connection box terminal
marked with . Before connecting the cooker to the power supply it is important
to read the information on the data plate and the connection diagram.
Customer Service
We recommend our Haier Customer Service and the use of original spare parts.
If you have a problem with your appliance, please first check the section
TROUBLESHOOTING. If you cannot find a solution there, please contact
- your local dealer or
- the Service & Support area at www.haier.com.au or at www.haier.co.nz where you can activate the service claim and also find FAQs.
To contact our Service, ensure that you have the following data available. The information can be found on the rating plate at the door.
- Model
- Serial No.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>