accento dynamica ADS65-60BT Bluetooth Ceiling Speaker Instruction Manual
- July 31, 2024
- accento dynamica
Table of Contents
Instuction Manual
ADS65-60BT
Amplifier RMS: 30W X2
Amplifier Maximum Power: 60W X2
AC 240V IN, DC 15V 2.4A OUT
Bluetooth VER4.1+EDR
Distance 10M
Thank you for your purchase of the Accento-Dynamica Bluetooth® Ceiling
Speaker.
Operation is completely hands-free and pairing is easy with no pass key
required.
Once power is connected, simply pair and stream. The pairing name is
“ACCENTO”.
OPERATION:
Power-ON the Accento-Dynamica Speaker.
LED Blinking RED:
The unit will amplify LINE-IN (requires line-level audio to be connected to
the RCA inputs), and is ready and waiting for any device to connect to it via
Bluetooth®.
Pair Your Bluetooth® device.
Tum on your Bluetooth® device and enable Pair to a new device. Pair to
“ACCENTO”.
LED Constant BLUE:
Indicates you are now paired. Speaker audio heard remains LINE-IN.
Commence streaming from your paired Bluetooth® device.
LED Blinking Blue:
Indicates the speaker is now streaming Bluetooth® audio from your device.
Return to LINE-IN audio.
LED constant BLUE:
Still paired, but after several seconds of silence, will auto-switch to LINE-
IN.
To return to Bluetooth® streaming, press play on your Bluetooth® device.
End Session.
LED Blinking RED: If you disable your Bluetooth® device, pairing is broken,
the ceiling speaker amplifier auto-switches to LINE-IN audio playback and The
unit remains waiting for any Bluetooth® connection (See above).
Bluetooth® Interrupted.
If you leave the Bluetooth® reception area and the speaker loses signal,
connection will automatically re-pair once you return to the zone.
BUTTON:
The button next to the LED on the Accento-Dynamica fascia is intended for
installation servicemen to test for successful connections and is not required
for general operation. If currently paired (LED is BLUE) then:
Short Button Press: will pause playback, press again commences playback.
Long Button Press: will disconnect the current Bluetooth® connection, and the
unit is ready to pair again. LED is RED (See pairing instructions).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>