Mueller MG-50G ArmorFlow Heavy Duty Expandable Garden Hose User Manual
- June 3, 2024
- MUELLER
Table of Contents
Mueller MG-50G ArmorFlow Heavy Duty Expandable Garden Hose
PARTS
Instructions
- Before use, ensure rubber gaskets are inserted into the Female Brass Connector and bottom of Spray Nozzle. These are important to avoid leaks. 3 Spare gaskets are provided.
- Connect Spray Nozzle (with rubber gasket) to Male Brass Connector. (NOTE:Using a nozzle is recommended to maintain pressure.)
- Turn the garden hose Valve to the OFF position (Horizontal position). Attach the Female Brass Connector (with rubber gasket) to the water source/spigot.
- Gradually turn the water on at spigot and allow the hose to expand to full length. Do not pull or drag the hose while water is still filling. This will better protect the hose.
- Face nozzle where you desire to spray and rotate dial for preferred Spray Option.
- Open the brass Valve to ON (Vertical position). Ensure water pressure at spigot is at full pressure (6 bars recommended). Squeeze Spray Nozzle Handle to release water. Use Lock for continuous water flow.
- When finished, turn the water off at the spigot (or Valve for short- periods only). Ensure Valve is ON, squeeze Spray Nozzle Handle, and allow excess water to drain. The hose will retract to its original size.
Spray Options
- Intended for outdoor use and standard watering tasks.
- Not intended for hot water use.
- To avoid damage, do not over tighten connectors. Hand-tighten to a snug fit.
- Do not stretch the hose when empty of water, as when released the quick retraction may cause injury.
- When draining water, keep people, pets, and objects clear of the quickly contracting hose.
- Drain after each use. Do not leave the hose under water pressure when not in use.
- Drain completely before storage and store indoors during extreme hot or cold temperatures. Do not leave the hose in the sun for extended periods of time.
- Keep away from children and do not leave hose unattended when children are nearbv.
- Do not drag on or around concrete, brick, or sharp edges to avoid accidental snags.
ATTENTION: Working water pressure is 6 Bars/87 PSI. Recommend using under 6 Bars /87 PSI for optimal lifespan.
ADDRESS: 168 Mason Way Unit #4A, City of Industry, CA 91746
Telephone: 888-632-9981
E-mail: support@muellerdirect.com
Web: www.muellerhomeus
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>