Aisino A99 LITE Andriiod POS Terminal User Guide

Aisino A99 LITE Andriiod POS Terminal

Statement

• Please read this guide carefully before using the device to ensure your safety and correct use of the device. For information about the device configuration, please refer to the contract or information related to the device and the seller of the device to you.
• The pictures in this guide are for reference only. If some pictures do not match the actual products, please refer to the actual products. Many network functions described in this document are special services provided by network service providers (ISPs).
• The availability of these network functions depends on the ISPs that provide the services to you.
• No part of this Manual shall be reproduced, excerpted, backed up, modified, transmitted, translated into other languages, or used in whole or in part for commercial purposes in any form or by any means without the permission of the Company.

Package Content

Product Description

Note: Those marked in front of the module name in the above table are optional parts, which shall be subject to the specific order requirements.

Quick installation

Take out the POS terminal, lithium battery, power adapter, and other necessary parts from the packing box, then follow the steps below for a quick installation.

Install the SIM/ SAM(PSAM) card:

1. Open the battery cover.
2. Follow the silkscreen indication and place each of the needed SIM/ SAM cards separately into the right slot following the directions as the picture shows.

Cautions

1. When installing or removing the SIM/ SAM card, please confirm that the device is power-offed, otherwise the cards may be damaged;
2. When installing the SIM/ SAM card, the chip faces toward the internal side of the device;
3. SIM/ SAM cards cannot paste stickers, tags, or other materials that may change the thickness of the card to prevent non-smooth installation or disassembly.

Install and remove the lithium battery

Install the battery:

1. Open the battery cover;
2. Insert the plug side of the battery into the battery socket.
3. Put the battery into the battery container;
4. Close the battery cover.

Remove the battery:

1. Open the battery cover after power-off;
2. Pull off the battery by grasping the line at the plug and pulling it up and off;
3. Gently remove the battery from the battery container.

Usage and Operation

Power on / Power off / Restart:

• Power on: press and hold the “Power” key on the keyboard for 2 seconds. When the backlight of the display screen is on, the device is activated.
• Power off/   Restart: press and hold the “Power” key for 2 seconds. The screen will display options for the “shutdown/contextual model/restart/airplane mode” menu.
• Press the shutdown” key to complete the shutdown; Press the restart” key to restart the device.
• Cautions When operating a transaction, the user interface is in the community action status. Please do not turn off your device.

Troubles and Troubleshooting

If the problem remains the same, please contact customer service.

Matters need attention

Cautions for use

• Unauthorized disassembly of this device will cause the built-in security key to be destroyed resulting in unusable.
• If the power adapter plug or power cord is damaged, please do not use them in case of electric shock or fire.
• Please do not touch the power cord with a wet hand or pull out the power adapter like pulling the power cable.
• Please do not touch the device and power adapter with a wet hand in case of a short circuit, malfunction, or electric shock.
• Please stop using the power adapter and contact sales representatives for an exchange if the power adapter is caught in the rain, gets wet, or is affected by dampness.
• The charge must be certified by local regulations and meet the charging specifications of the device.
• If the device has to connect USB ports, please ensure that the USB ports have USB-IF identification, and its performance is qualified with the USB-IF requirements.

Operating environment

• Do not use the device during thunderstorms.
• Otherwise, the device may fail or you could get an electric shock.
• Avoid putting the terminal in direct sunlight high temperature, moist, or dusty environment
• Forbid non-professionals to repair the terminal.
• Before inserting the card, please check the internal and around of the IC card slot when you find some suspicious objects, must report them to a related administrator.
• A door or cover intended only for occasional use by the ordinary person such as for the installation of accessories, may be removable if an instructional safeguard is provided for correct removal and reinstallation of the door or cover.
• Do not place the device in a too-cold environment.
• When the temperature of the device rises, moisture may form inside the device, which may damage the circuit board.
• When charging the device, the power socket should be near the device and easily accessible. The charging area of the device must be kept away from debris, combustible materials, or chemicals.
• Please do not disassemble the device without permission. The non-professional operation may damage the device.
• Do not touch the screen with pens, pencils, or other sharp objects.
• Do not strike, throw, step on, or subject batteries to severe physical shock.

Accessories requirements

• Please use manufacturer-authorized batteries, power adapters, and other accessories. Use of unauthorized or incompatible accessories may result in fire, explosion or other hazard.
• The usage of unauthorized accessories will result in the violation of the warranty provisions or local relevant provisions and may cause safety accidents.
• To obtain authorized accessories, contact the sales agent or distributor who sold the devices to you.

Charger safety

• If the power adapter plug or us cable is damaged, do not use it to avoid electric shock or fire.
• Do not touch the device and power adapter with wet hands to avoid short circuits, device failure, or electric shock,
• Disconnect the charger from the device and the power socket when the battery is fully charged.
• Disconnect the power cord when you are not charging the device.
• Do not charge for a long time unattended.
• Do not strike, throw, step on, or subject the charger to severe physical shock. If the charger cover is damaged, contact the seller who sold the device to you to get it replaced.

Battery Safety

• Do not short-circuit batteries, do not let metal objects or other conductive objects be in contact with the battery terminals.
• Disposal of a battery into a fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
• Do not insert foreign bodies into the battery, immerse or expose it to water or other liquids, or expose it to fire, explosion, or another hazard.
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
• If there is a battery fluid leakage, avoid contact with eyes or skin. In case of contact with eyes or skin, rinse immediately with plenty of water and seek medical advice.
• Do not use damaged batteries.
• When the standby time gets shorter than normal, please replace the battery.

Environmental protection and resource recovery

• This product uses lithium batteries. If your country has regulations, be sure to dispose of old batteries in the right places according to the regulations.

Cautions

• There will be a danger of explosion using the wrong model of battery The battery must be disposed of in accordance with the instructions.

FCC compliance statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The end user must follow the specific operating instructions to satisfy RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body with a minimum distance of 10mm.

Warranty

After-sale service

• If you have any questions, please contact your local dealer.
• Warranty card- ———————
• Product Name: ———————–
• Product Model:– ———————-
• Warranty terms: ——————–

1. Our company will provide you with high-quality after-sales service.
2. If the user causes product damage due to human factors, the company will charge a maintenance fee when repairing
3. Please take good care of this card, which will be the warranty basis of our company.

Certificate

• Inspector————————-
• Date:—————————-
• Aisino Vanstone Electronic (Beijing) Co., Ltd.
• Address: 3/F. No.2 Building, Aisino Information Park, No.18A,
• Xingshikou Road, Haidian District, Belling.
• Zip Code: 100195.
• Email:info@vanstone.com.cn
• Manufacture Name: Vanstone Electronic(Huizhou) Co., Ltd.
• Manufacture Address: 4/F, No.12 Building, Aerospace Science And Technology Industrial Park, No, 51, Zhongkai Road, Huizhou
• City, Guangdong Province, China.
• Company Website:https://www.vanstone.com.cn/en

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>