Whirlpool 400011717820 Wash Dryers Instruction Manual
- July 26, 2024
- Whirlpool
Table of Contents
Whirlpool 400011717820 Wash Dryers
Product Specifications
- Dimensions : 100cm x 60cm x 39 inch
- Weight : 8.2 feet
- Max Capacity : 1.0 cm / 0.4 inch
- Intended Use : Household and similar applications
- Not for professional use or outdoor use
Required Tools
Parts
Product Usage Instructions
Safety Instructions
- Before using the appliance, read and observe the safety instructions provided in the manual. Keep them for future reference.
- Do not operate the appliance using external switching devices or timers.
- Ensure the appliance is used within the intended household applications and follow the program table for maximum load capacity.
Installation
- Install the appliance with the help of two or more persons to avoid injury. Use protective gloves during unpacking and installation.
- If stacking a dryer on top of the washing machine, use appropriate stacking kits available from After-Sales Service or specialist dealers.
- Ensure the appliance is placed on a stable surface with all four feet resting on the floor. Use a spirit level to check for perfect leveling.
- If installing on wood or floating floors, place a sheet of plywood underneath for support.
- Connect water inlet hose(s) according to local water company regulations. For cold fill-only models, do not connect to hot water supply.
- Remove transport bolts before using the machine and cover openings with provided plastic caps.
- Wait a few hours after installation before starting the appliance to acclimate to room conditions.
- Ensure ventilation openings at the base are not obstructed by carpets or other materials.
SAFETY INSTRUCTIONS
Before using the appliance, read these safety instructions. Keep them nearby for future reference. These instructions and the appliance itself provide important safety warnings, to be observed at all times. The manufacturer declines any liability for failure to observe these safety instructions, for inappropriate use of the appliance or incorrect setting of controls. Very young children (0-3 years) should be kept away from the appliance. Young children (3-8 years) should be kept away from the appliance unless continuously supervised. Children from 8 years old and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge can use this appliance only if they are supervised or have been given instructions on safe use and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision. Never open the door forcibly or use it as a step.
PERMITTED USE
CAUTION : The appliance is not intended to be operated by means of an external switching device, such as a timer, or separate remote controlled system.
This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels, bed & breakfast and other residential environments; areas for communal use in blocks of flats or in launderettes.
- Do not load the machine above the maximum capacity (kg of dry cloth) indicated in the programme table.
- This appliance is not for professional use. Do not use the appliance outdoors.
- Do not use any solvents (e.g. turpentine, benzene), detergents containing solvents, scouring powder, glass or general purpose cleaners, or flammable fluids; do not machine wash fabrics that have been treated with solvents or flammable liquids.
INSTALLATION
The appliance must be handled and installed by two or more persons – risk of injury. Use protective gloves to unpack and install – risk of cuts. If you want to stack a dryer on top of your washing machine, first contact our After- Sales Service or your specialist dealer to verify whether this is possible. This is only possible if the dryer is attached to the washing machine by means of appropriate stacking kit available through our After- Sales Service or your specialist dealer. Move the appliance without lifting it by the worktop or top lid.
IMPORTANT TO BE READ AND OBSERVE
-
Installation, including water supply (if any) and electrical connections and repairs must be carried out by a qualified technician. Do not repair or replace any part of the appliance unless specifically stated in the user manual. Keep children away from the installation site. After unpacking the appliance, make sure that it has not been damaged during transport. In the event of problems, contact the dealer or your nearest After-sales Service. Once installed, packaging waste (plastic, styrofoam parts etc.) must be stored out of reach of children – risk of suffocation.
-
The appliance must be disconnected from the power supply before any installation operation – risk of electric shock. During installation, make sure the appliance does not damage the power cable – risk of fire or electric shock. Only activate the appliance when the installation has been completed.
-
Do not install your appliance where it may be exposed to extreme conditions, such as: poor ventilation, temperatures below 5 °C or above 35 °C.
-
When installing the appliance make sure that the four feet are stable and resting on the floor, adjusting them as required, and check that the appliance is perfectly to level using a spirit level.
-
If the appliance is being installed on wood or “floating” floors (certain parquet and laminate materials), secure a 60 x 60 x 3 cm (at least) sheet of plywood to the floor then place the appliance on top of this.
Connect the water inlet hose(s) to the water
supply in accordance with the regulations of your local water company. -
For cold fill only models: do not connect to the hot water supply.
-
For models with hot fill: the hot water inlet temperature must not exceed 60 °C.
-
The washing machine is fitted with transport bolts to prevent any possible damage to the interior during transport. Before using the machine, it is imperative that the transport bolts are removed. After their removal, cover the openings with the 4 enclosed plastic caps.
-
After installation of the device, wait a few hours before starting it so that it acclimates to the environmental conditions of the room.
-
Make sure that the ventilation openings in the base of your washing machine (if available on your model) are not obstructed by a carpet or other material.
-
Use only new hoses to connect the appliance to the water supply. The old hose-sets should not be reused.
-
The supply water pressure must be in the 0.1-1 MPa range.
-
Do not repair or replace any part of the appliance unless specifically stated in the user manual. Use only authorized After-sales Service. Self or non-professional repair may lead to dangerous incident resulting in live or health threatening and/or significant property damage.
-
The spare parts for the household machine will be available for 10 years after placing the last unit on the market as dictated by the European Ecodesign regulation.
ELECTRICAL WARNINGS
- It must be possible to disconnect the appliance from the power supply by unplugging it if plug is accessible, or by a multi-pole switch installed upstream of the socket in accordance with the wiring rules and the appliance must be earthed in conformity with national electrical safety standards.
- Do not use extension leads, multiple sockets or adapters. The electrical components must not be accessible to the user after installation. Do not use the appliance when you are wet or barefoot. Do not operate this appliance if it has a damaged power cable or plug, if it is not working properly, or if it has been damaged or dropped.
- If the supply cord is damaged, it must be replaced with an identical one by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard – risk of electric shock.
CLEANING AND MAINTENANCE
WARNING: Ensure that the appliance is switched off and disconnected from the power supply before performing any maintenance operation. To avoid risk of personal injury use protective gloves (risk of laceration) and safety shoes (risk of contusion); be sure to handle by two persons (reduce load); never use steam cleaning equipment (risk of electric shock). Nonprofessional repairs not authorized by the manufacturer could result in a risk to health and safety, for which the manufacturer cannot be held liable. Any defect or damage caused from nonprofessional repairs or maintenance will not be covered by the guarantee, the terms of which are outlined in the document delivered with the unit.
DISPOSAL OF PACKAGING MATERIALS
The packaging material is 100% recyclable and is marked with the recycle
symbol. The various parts of the packaging must therefore be disposed of
responsibly and in full compliance with local authority regulations governing
waste disposal.
DISPOSAL OF HOUSEHOLD APPLIANCES
This appliance is manufactured with recyclable or reusable materials. Dispose
of it in accordance with local waste disposal regulations. For further
information on the treatment, recovery and recycling of household electrical
appliances, contact your local authority, the collection service for household
waste or the store where you purchased the appliance. This appliance is marked
in compliance with European Directive 2012/19/EU, Waste Electrical and
Electronic Equipment (WEEE). By ensuring this product is disposed of
correctly, you will help prevent negative consequences for the environment and
human health. The symbol on the product or on the accompanying documentation
indicates that it should not be treated as domestic waste but must be taken to
an appropriate collection center for the recycling of electrical and
electronic equipment.
FAQ
Q: Can I use solvents or flammable liquids in the appliance?
A: No, do not use solvents, detergents containing solvents, or flammable
fluids in the appliance.
Q: Can I stack a dryer on top of the washing machine?
A: Yes, you can stack a dryer on top of the washing machine using appropriate
stacking kits available from After-Sales Service or specialist dealers.
Q: How should I connect the water inlet hose(s)?
A: Connect the water inlet hose(s) according to the regulations of your local
water company. For cold fill-only models, avoid connecting to hot water
supply.