I-rocks IRM31R Wireless Lightweight Gaming Mouse Installation Guide
- July 25, 2024
- i-rocks
Table of Contents
I-rocks IRM31R Wireless Lightweight Gaming Mouse
Product Name: W-CAR WiFi driving record/reversing visual camera
Supported Platforms: IOS, Android
Specifications
- Camera
- Screw
- Extension cable
- 3M glue
Product information
Troubleshooting
- No image: Check camera connection and WiFi list on mobile phone.
- Background operation: Enable background running in phone settings.
- Video delay: Ensure antenna is not shielded by metal.
- WiFi connection issues: Fully close app and restart mobile phone and camera.
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, keep a minimum
distance of 20cm between the equipment and your body. Do not co-locate this
device and its antenna(s) with any other antenna or transmitter.
FAQ:
Q: How do I troubleshoot video delay issues?
A: Check for antenna shielding by metal and ensure proper antenna positioning
facing the cockpit.
Wireless Lightweight Gaming Mouse
Package Contents
System Requirements
- Microsoft Windows® 8.1. Windows® 10, Windows® 11.
- USB ports
- Bluetooth receiving module
Features
- High performance wireless and wired connection
- Ultralightweight 66g design
- PixArt PAW3395 optical sensor with true 26,000 dpi sensitivity
- Kailh GM8.0 microswitches for main clicks with up to 80 million click lifespan
- Built-in rechargeable battery and receiver storage
- 0nboard memory for saving mouse settings on the go
- Software to adjust button functions and backlighting
Specifications
MOUSE
- Connection : Wired ( USB Full Speed ) / Wireless ( 2.4GHz & Bluetooth 5.0 )
- Key number: 7 Keys
- Sensor: PAW-3395
- Resolution: 100-26000 DPl
- Default 400/800/1600/2400/5000
- Report rate : 125(Red) / 250(0range) / 500(Blue) / l000(Green) Hz
- Backlight : Wheel, RGB LED
- Wireless Connection Distance : Up to 10 M
- Charging Voltage: DC 5V
- Charging Interface: USB-C
- Rechargeable Li-ion battery: 500 mAh
- Cable length : approx. 180 cm
- Configuration Software Support
- Dimension : 123 mm X 66.5 mm X 40 mm
- Operating temperature : 0-45′
- Operating humidity : 10-85% RH
Receiver
- Interface : USB
- Dimension : 18.6(L) X 14.2(W) X 6.1 (H) mm
Product information
- Product function
Press and hold Middle Click+ Right Click+ Previous Side Button simultaneously
to turn on/off wheel backlighting.
When carrying the mouse or mouse is not in use, you may switch connection mode
to Power off/Wired for avoiding accidental click signal output.
Instructions an Charging and Law Voltage :
Wheel with blinking red light indicates law battery voltage – please charge
your mouse. When it is in charging, the wheel will be in static red light and
will go off or return ta preset backlighting made after charging is complete.
(Charging with 250mAh current takes battery 2-3 hours ta full.)
Report Rate Adjustment
Due to Bluetoath protocol, report rate under Bluetoath made will be fixed at
125 Hz and it is nan-adjustable.
- Bluetooth Connection : 125 Hz (Ranging from 120Hz ta 133Hz)
- Wired/2.4GHz Wireless Connection : 125(Red) / 250(0range) / 500(Blue) / lOOO(Green) Hz (Adjustable via button and software)
Connecting Y1ur Mouse
This product offers 3 ways of connecting to your PC: USB-C wired, 2.4GHz or Bluetooth connection. Switch between them with Connection Mode Switch on the bottom of your mouse.
- USB-C Wired Connection
Regardless of any mode, the mouse will automatically switch to wired connection and begin charging once USB-C cable is attached between your mouse and your PC. To connect :
1. Use cable coming with your mouse, with USB Type-A side for your PC and USB Type-C side for your mouse.
2. Your PC will automatically detect your mouse.
3. You may use your mouse after detection.- Bluetooth Connection
Before using mouse via Bluetooth connection for the first time, you need to pair it with your PC.
1. Switch to Bluetooth mode (flip the connection mode switch towards B mark.) The mouse wheel will blink blue light 3 times indicating Bluetooth mode.
2. Simultaneously press and hold Left Click+ Middle Click+ Right Click to enter pairing mode. The mouse under pairing mode will blink blue light rapidly and is discoverable by your PC.
3. Navigate to Bluetooth settings on your PC and add Bluetooth device. Look for device labeled “Wireless Mouse” and pair it with your PC.
4. When pairing is successful, mouse will stop blinking blue light and you may use your mouse now.Please note: when under Bluetooth connection, the mouse will enter sleep mode after 1 minute idle -which turns off backlighting and put mouse to ultra-low power consumption standby to save energy. Click or move your mouse to leave sleep mode.
2.4GHz Wireless Connection
The 2.4GHz receiver is already factory paired with your mouse. You don’t need
to pair it with your PC additionally.
- Switch to 2.4GHz wireless mode (flip the connection mode switch towards G mark.)
- Plug in 2.4GHz receiver which comes with your mouse to your PC.
- Your PC will automatically detect your receiver and cnnect with your mouse.
- You may use your mouse after detection.
Please note: when under 2.4GHz connection, the mouse will enter sleep mode after idle – which turns off backlighting and put mouse to ultra-low power consumption standby to save energy. Click or move your mouse to leave sleep mode.
- USB Adaptor
The product bundle USB-C to A adaptor, to support USB C cable and 2.4G receiver.
Software
The mouse software works under wired and 2.4GHz wireless mode – it will not work and be not available under Bluetooth; however, saved mouse settings w ill only be applied under wired and 2.4GHz wireless mode. Please visit iRocks official website to download and install latest software for backlight, macro, multimedia key binding configuration and more.
- Run the software installer you download from iRocks official website and follow the installation steps
- Plug in the keyboard after installation, the software will start to identify it.
- Launch the software. It will take some time to download the memory parameter and setting of the keyboard.
Traublesho1ting & Cautions
If your mouse does not work normally:
- Check if connection switch on the bottom of your mouse is flipped to the desired mode you want to use.
- Check the USB receiver is connected to your computer’s USB port correctly – unplug and plug it back.
- Charge your mouse immediately when the battery low indicator lights up.
- Metal objects close to or in between the mouse may reduce wireless performance. Try moving metal objects away from the mouse.
- This mouse has 2.4GHz wireless connection, using USB 3.x and 2.4GHz wireless devices at the same time may cause radio frequency interference and affect normal functionality of the wireless device. Try to reduce radio interference of the USB 3.x device to your wireless mouse, Plug the receiver into the USB 2.0 port or other locations as far away as possible from the USB 3.x port or use USB hub / USB extension cable to re-position your wireless receiver to a location away from the USB 3.x port.
- For saving power, the mouse goes into sleep mode when it’s not in use for a while. Press any button or move your mouse, and wait for 1 to 3 seconds to bring the mouse out of sleep mode.
- Charge the battery of your mouse before storing it without use. Storing your mouse with low battery status and voltage for long periods of time may cause battery malfunction.
- When your mouse is not in use, switching to USB wired mode (Off/Wired) is recommended.
- Avoid putting your mouse under high moisture condition or direct sun.
- Do not expose your mouse to extreme temperatures, heat, fire or liquid.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>