streamplify Mic Pro SB RGB Microphone Instruction Manual
- July 25, 2024
- streamplify
Table of Contents
streamplify Mic Pro SB RGB Microphone
Overview
- A.Mute Button.
1. Tap to toggle mic mute. (indicated by red light on bottom rim).
2. Long press until light bar tums green to enable noise reduction function.
- B: Polar pattem indicator.
- C: RGB light Button.
- Short press to change RGB effect.
- Press for 3 seconds to toggle RGB.
- D: Indicator Color.
- Blue-Default gain adjustment.
- Cyan-Mic monitoring adjustment.
- Pink-Output volume adjustment.
- Green -Noise reduction enabled.
- Red- Mic mute enabled.
- E: Jog Dial.
- Adjust microphone gain using the dial, indicated by a blue LED.
- Short press to switch among four polar patters: Stereo, Omni-directional, Cardioid, Bidirectional.
- Long press for 3 seconds until to set voice monitoring volume. The LED will tum cyan, then retum to blue after 3 seconds.
- Long press for 3 seconds twice to adjust output volume. The LED will tum pink, then retum to blue after 3 seconds.
- F: RGB light control (10 light modes)
- Orange.
- Green.
- Cyan.
- Blue.
- Pink.
- Rainbow.
- Rainbow Scrolling.
- Single Scrolling.
- Single Breathing.
- Rainbow Breathing.
*Mute function indicated by red light.
- G: Audio out 3.5mm jack.
- H: USBC-C connector.
Package list
Installation and How to Set Up
This product is plug and play for easy use. For more product info, scan the QR code below to open the setup guide on our Streamplify app.
For more product info, scan the QR code below to open the setup guide on our Streamplify Discord server.
Pro Gamersware GmbH | Gaußstr. 1, 10589 Berlin, Germany info@streamplify.com streamplify.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>