LG 27GS85Q 27 Inch UltraGear Gaming LED Monitor Owner’s Manual

LG 27GS85Q 27 Inch UltraGear Gaming LED Monitor

Product Specifications

• Models: 27GS85Q, 32GS85Q, 27GS85QX, 32GS85QX
• Screen Type: LCD with LED backlights
• Resolution: [Specify resolution here]
• Dimensions: [Specify dimensions here]
• Weight: [Specify weight here]

Product Usage Instructions

Assembling and Preparing

• Ensure you assemble the monitor according to the instructions provided in the manual. Make sure to handle the monitor with care during assembly to prevent any damage.

Using the Monitor

• To power on the monitor, press the joystick button once. To power off, press and hold the joystick button. Adjust volume by moving the joystick left or right and screen brightness by moving it up or down.

Adjusting Stand Height and Angle

• When adjusting the stand height, make sure the monitor is securely mounted on the stand base and handle it with both hands for safety. Adjust the angle by following the instructions provided in the manual to prevent any damage.

Using Kensington Lock

• If you wish to secure your monitor, use the Kensington security system connector located at the bottom of the monitor. Refer to the Kensington lock owner’s manual for detailed installation instructions.

Frequently Asked Questions

Q: How do I adjust the screen brightness?

A: You can adjust the screen brightness by moving the joystick button up or down.

Q: Where can I find the latest drivers and software for the monitor?

A: You can download and install the latest version from the LGE website at www.lg.com.

• LG LED Monitor applies LCD screen with LED backlights.
• Please read this manual carefully before operating your set and retain it for future reference.

LICENSE

• Each model has different licenses. Visit www.lg.com for more information on the license.
• The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress, and HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

OPEN SOURCE SOFTWARE NOTICE INFORMATION

• To obtain the source code that is contained in this product, under GPL, LGPL, MPL, and other open source licenses that must disclose source code, and to access all referred license terms, copyright notices, and other relevant documents, please visit
• https://opensource.lge.com.
• LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
• This offer is valid to anyone in receipt of this information for three years after our last shipment of this product.

ASSEMBLING AND PREPARING

CAUTION

• Always use genuine LG components to ensure safety and product performance.
• The product warranty will not cover damage or injury caused by the use of unauthorized components.
• It is recommended to use the supplied components.
• Illustrations in this document represent typical procedures, so they may look different from the actual product.
• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product.
• Doing so may damage the product.
• Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty.
• Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand and could result in personal injury.
• When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen may cause damage to it.
• For wave pattern on appearance, unlike the general method of coating, it’s applied to added glittering material in raw material. With no peeled-off appearance, it has good durability.
• Please use it with confidence because there is no problem in using the product at all.

NOTE

• The components may look different from those illustrated here.
• Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product.
• To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer from which you purchased the product.
• The power cord provided may differ depending on the region.

Supported Drivers and Software

• You can download and install the latest version from the LGE website (www.lg.com).
• Monitor Driver / OnScreen Control

Product and Button Description

How to Use the Joystick Button

• You can easily control the functions of the monitor by pressing the joystick button or moving it left/right/up/down with your finger.

Basic Functions

• A (Power on): Press the joystick button once with your finger to turn on the monitor.
• B (Power off) : Press and hold the joystick button once with your finger to turn off the monitor.
• C (Volume control) : You can control the volume by moving the joystick button left/right.
• D (Controls screen brightness): You can control the screen’s brightness by moving the joystick button up/down.

Moving and Lifting the Monitor

• When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation, regardless of its shape or size.
• Place the monitor in the original box or packing material before attempting to move it.
• Before moving or lifting the monitor, disconnect the power cord and all other cables.
• Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
• When holding the monitor, the screen should face away from you to prevent it from being scratched.
• When transporting the monitor, do not expose the monitor to shock or excessive vibration.
• When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.

CAUTION

• Avoid touching the monitor screen as much as possible.
• This may result in damage to the screen or some of the pixels used to create images.
• If you use the monitor panel without the stand base, its joystick button may cause the monitor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.

Installing on a Table

Lift the monitor and place it on the table in an upright position. Place the monitor at least 100 mm away from the wall to ensure sufficient ventilation.

• A : 100 mm

CAUTION

• Unplug the power cord before moving or installing the monitor. There is a risk of electric shock.
• Make sure to use the power cord that is provided in the product package and connect it to a grounded power outlet.
• If you need another power cord, please contact your local dealer or the nearest retail store.

Adjusting the Height And Angle

Adjusting the Stand Height

1. Place the monitor mounted on the stand base in an upright position.
2. Handle the monitor with both hands for safety.

WARNING When adjusting the screen height, do not place your hand on the stand body to avoid injury to your fingers.

Adjusting the Angle

1. Place the monitor mounted on the stand base in an upright position.
2. Adjust the angle of the screen.

The angle of the screen can be adjusted forward or backward from -5 ° to 15 ° for a comfortable viewing experience.

WARNING

• To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as illustrated below.
• Be careful not to touch or press the screen area when adjusting the angle of the monitor.

Pivot Feature

• The pivot feature allows the monitor to rotate 90° clockwise.

WARNING

• To avoid scratching the stand base, make sure that when rotating the monitor using the pivot feature, the stand does not make contact with the monitor.
• When using the Pivot function, do not rotate the monitor too fast or with excessive force.
• The head may come in contact with the stand and scratch the base.
• Be careful as you may injure your finger by jamming it between the head and the stand.

1. Raise the monitor to the maximum height.
2. Adjust the angle of the monitor in the direction of the arrow as shown in the figure.
3. Rotate the monitor clockwise as shown in the figure.
4. Complete the installation by rotating the monitor 90° as shown below.

• WARNING Be careful as you may injure your finger by jamming it between the head and the desk.

NOTE

• The auto Pivot feature of the display is not supported.
• The screen can be rotated easily using the screen pivot shortcut key provided with your Windows operating system.
• Note that some Windows versions and some graphics card drivers may use different settings for the screen pivot key or may not support the pivot key at all.

Using the Kensington Lock

• The connector for the Kensington security system is located at the bottom of the monitor.
• For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website at http://www.kensington.com.
• Connect the monitor to a table using the Kensington security system cable.
• NOTE The Kensington security system is optional. You can obtain optional accessories from most electronics stores.

Installing on the Wall

• This monitor meets the specifications for the wall mount plate or other compatible devices.
• Install the monitor at least 100 mm away from the wall and leave about 100 mm of space on each side of the monitor to ensure sufficient ventilation.
• Detailed installation instructions can be obtained from your local retail store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket.

Installing the Wall Mount Plate

• To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
• Make sure that the wall mounting bracket is securely fixed to the monitor and the wall.

NOTE

• Use the screws specified by VESA standards.
• The wall mount kit includes the installation guide and all necessary parts.
• The wall mounting bracket is optional. You can obtain optional accessories from your local dealer.
• The length of the screw may differ for each wall mounting bracket. If you use screws longer than the standard length, it may damage the inside of the product.
• For more information, please refer to the user manual for the wall mounting bracket.
• Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the screen.
• Remove the stand before installing the monitor on a wall mount by performing the stand attachment in reverse.

CAUTION

• Unplug the power cord before moving or installing the monitor to avoid electric shock.
• Installing the monitor on the ceiling or a slanted wall may result in the monitor falling off, which could lead to injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.
• To prevent injury, this apparatus must be securely attached to the wall under the installation instructions.
• Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty.
• Use the wall mounting bracket and screws that conform to VESA standards. Damage caused by the use or misuse of inappropriate components will not be covered by the product warranty.
• When measured from the back of the monitor, the length of each installed screw must be 8 mm or less.
• A: Wall Mount Plate
• B: Back of the Monitor
• C: Standard screw
• D: Max. 8 mm

USING THE MONITOR

• Illustrations in this manual may differ from the actual product. Press the joystick button, go to [Settings] > [Input], and then select the input option.

CAUTION

• If you use generic cables not certified by LG, the screen may not display or there may be image noises.
• Do not press the screen for a prolonged time. This may cause image distortion.
• Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a PC screensaver if possible.
• When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power outlet.
• The monitor may flicker when turned on in an area where the temperature is low. This is normal.
• Sometimes red, green, or blue spots may appear on the screen. This is normal.

Connecting to a PC

• This monitor supports the Plug and Play* feature.
• Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure anything or install any manual drivers.

HDMI Connection

• Transmits digital video and audio signals from your PC to the monitor.

CAUTION

• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.
• Recommended HDMI cable types
• High-Speed HDMI®/M cable
• High-Speed HDMI®/M cable with Ethernet

DisplayPort Connection

• Transmits digital video and audio signals from your PC to the monitor.

NOTE

• There may be no video or audio output depending on the DP (DisplayPort) version of the PC.
• Make sure to use the supplied DisplayPort cable of the product. Otherwise, this may cause the device to malfunction.
• If you are using a Mini DisplayPort output graphics card, use a Mini DP to DP (Mini DisplayPort to DisplayPort) cable or gender that supports DisplayPort1.4. (Sold separately)

Connecting AV Devices

HDMI Connection

• HDMI transmits digital video and audio signals from your AV device to the monitor.

NOTE

• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.
• Recommended HDMI cable types
• High-Speed HDMI®/™ cable
• High-Speed HDMI®/™ cable with Ethernet

Connecting Peripherals

USB Device connection

• The USB port on the product functions as a USB hub.
• To use USB 3.0, connect the A-B type USB 3.0 cable of the product to the PC. Peripheral devices connected to the USB IN port can be controlled from the PC.

NOTE

• It is recommended you install all Windows Updates to keep your Windows up-to-date before connecting to the product for use.
• Peripheral devices are sold separately.
• A keyboard, mouse, or USB device can be connected to the USB port.
• The charging speed may vary depending on the device.

CAUTION

• Cautions When Using a USB Device.
• A USB device with an automatic recognition program installed, or that uses its driver, may not be recognized.
• Some USB devices may not be supported or may not work properly.
• It is recommended to use a USB hub or hard disk drive with power supplied. (If the power supply is not adequate, the USB device may not be recognized properly.)

Connecting Headphones

• Connect peripherals to the monitor via the headphones port.

NOTE

• Peripheral devices are sold separately.
• Depending on the audio settings of the PC and external device, headphones, and speaker functions may be limited.
• If you use angled earphones, it may cause a problem with connecting another external device to the monitor. Therefore, it is recommended to use straight earphones.

USER SETTINGS

NOTE Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.

Activating the Main Menu

1. Press the joystick button on the bottom of the monitor.
2. Move the joystick up/down and left/right to set the options.
3. Press the joystick button once more to exit the main menu.

Main Menu Features

Menu Settings

1. To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the [Settings].
2. Move the joystick up/down and left/right to set the options.
3. To return to the upper menu or set other menu items, move the joystick to or press ( ) it. 4 If you want to exit the OSD menu, move the joystick until you exit.

[Game Mode]

[Settings] > [Game Mode]

[Game Mode] on SDR(Non-HDR)signal

• [Gamer 1]/[Gamer 2]: [Gamer 1] and [Gamer 2] picture modes allow you to save two sets of customized display settings, including game-related setup options.
• [FPS]: This mode is optimized for FPS games. It is suitable for very dark FPS games.
• [RTS]: This mode is optimized for the RTS Game.
• [Vivid]: Optimized the screen for vivid colors.
• [Reader]: Optimizes the screen for reading documents. You can brighten the screen in the OSD menu.
• [HDR Effect]: Optimizes the screen for high dynamic range.
• [sRGB]: A standard RGB color space for the monitor and printer.
• [Color Weakness]: This mode is for users who cannot distinguish between red and green. It enables users with color weakness to easily distinguish between the two colors.

[Game Mode] on HDR signal

• [Gamer 1]/[Gamer 2]: [Gamer 1] and [Gamer 2] picture modes allow you to save two sets of customized display settings, including game-related setup options.
• [FPS]: This mode is optimized for FPS games. It is suitable for very dark FPS games.
• [RTS]: This mode is optimized for the RTS Game.
• [Vivid]: Optimized the screen for vivid colors.

NOTE

• HDR content may not display correctly depending on Windows 10 OS settings, please check HDR on/off settings in Windows.
• When the HDR function is turned on, the characters or picture quality may be poor according to Graphic card performance.
• While the HDR function is on, screen flickering or cracking may occur when changing the monitor input or power on/off according to Graphic card performance.
• For information about whether the graphics card and game support HDR, visit their manufacture’s website.

[Game Adjust]

[Settings] > [Game Adjust]

• [Overclock] (only 27GS85Q/27GS85QX)
• [On]: Sets [Overclock] to a higher refresh rate than specified by the panel specification.
• [Off]: Disables the [Overclock] improvement feature.
• [Adaptive-Sync]/ [FreeSync]: Provides seamless and natural images in a gaming environment. Note that the screen flickering may occur intermittently in a specific gaming environment.
• [Extended]: Enable wider frequency range of [Adaptive-Sync]/ [FreeSync] function than basic mode. The screen may flicker during the gameplay.
• [Basic]: Enable basic frequency range of Adaptive-Sync/FreeSync function.
• [Off]: Adaptive-Sync/FreeSync function off.
• Supported Interface: DisplayPort (Adaptive-Sync), HDMI (FreeSync).
• Supported Graphic Card: A graphic card that supports NVIDIA’s G-SYNC or AMD’s FreeSync is necessary.
• Supported Version: Make sure to update the graphic card to the latest driver.
• For more information and requirements, refer to the NVIDIA website (www.nvidia.com and the AMD website
• [Black Stabilizer]: You can control the black contrast to have better visibility in dark scenes. You can easily distinguish objects on dark game screens.
• [Response Time]: Sets a response time for displayed pictures based on the speed of the screen.
• For a normal environment, it is recommended that you use [Fast].
• For a fast-moving picture, it is recommended that you use [Faster].
• Setting to [Faster] may cause the image to stick.
• [Faster]: Sets the response time to [Faster].
• [Fast]: Sets the response time to [Fast].
• [Normal]: Sets the response time to [Normal].
• [Off]: Disables the feature.
• [Crosshair]: Crosshair provides a mark on the center of the screen for First Person Shooter (FPS) games. Users can select the crosshair that fits their gaming environment among four different crosshairs.

[FPS Counter]

• [On]: The indicator is displayed on the upper left of the screen. It will reflect the actual frame rate that is received at the input.
• You can also adjust the position of the FPS Counter. (upper left/upper right / lower right / lower left)
• [Off]: Does not use the FPS Counter feature.
• [Game Reset]: Do you want to reset your Game settings?

NOTE

[FPS Counter]

• [FPS Counter] and [Crosshair] features can not be used at the same time.
• [Overclock] (only 27GS85Q/27GS85QX)
• After the monitor reboots, change the maximum refresh rate setting in the GPU control panel.
• If the screen display appears abnormal, turn off the [Overclock] setting.
• The [Overclock] function’s features/performance may vary depending on the graphics card or gaming content.
• We do not guarantee the performance of the function and are not responsible for any side effects that may occur from its activation.

Picture Adjust

[Settings] > [Picture Adjust]

• [Brightness]: Adjusts the brightness of the screen.
• [Contrast]: Adjusts the contrast of the screen.
• [Sharpness]: Adjusts the sharpness of the screen.

[Gamma]

• [Mode 1], [Mode 2], [Mode 3]: The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the lighter the image becomes.
• [Mode 4]: If you do not need to adjust the gamma settings, select [Mode 4].
• [Color Temp]: Set your color temperature.
• [Custom]: The user can customize the red, green, and blue colors.
• [Warm]: Sets the screen color to a reddish tone.
• [Medium]: Sets the screen color to between a red and blue tone.
• [Cool]: Sets the screen color to a bluish tone.
• [Manual]: The user can fine-tune the color temperature.
• [R/G/B]: You can customize the picture color using red, green, and blue colors.
• [Six Color]: Meets the user requirements for colors by adjusting the hue and saturation of the six colors (red, green, blue, cyan, magenta, and yellow) and then saving the settings.
• Hue: Adjusts the tone of the screen colors.
• Saturation: Adjusts the saturation of the screen colors. The lower the value, the less saturated and brighter the colors become. The higher the value, the more saturated and darker the colors become.
• [Black Level]: Sets the offset level (for HDMI only).
• Offset: as a reference for a video signal, this is the darkest color the monitor can display.
• [High]: Keeps the current contrast ratio of the screen.
• [Low]: Lowers the black levels and raises the white levels from the current contrast ratio of the screen.
• [Variable Backlight] (only 27GS85Q/27GS85QX)
• Provides global dimming effects depending on game or video content.
• [Off]: Disables the Variable Backlight feature.
• [Normal]: Preferably for playing video content and internet or word-processing.
• [Fast]: Preferably for console gaming experiences.
• [Faster]: Preferably for PC gaming experiences.
• [DFC]
• [On]: Adjusts the brightness automatically according to the screen.
• [Off]: Disables the DFC feature.
• [Picture Reset]: Returns picture and color to the default settings.

NOTE

• [Variable Backlight] (only 27GS85Q/27GS85QX)
• When this feature is enabled, a slight halo effect may be shown on dark backgrounds. This is normal and not a malfunction.
• The function can only be used on HDR content.
• It is recommended to turn off when you are not using the gaming function.

[Input]

[Settings] > [Input]

• [Input List]: Select the input mode.
• [Aspect Ratio]: Adjusts the aspect ratio of the screen.
• [Auto Input Switch]: When [Auto Input Switch] is set to [On], the display will automatically switch to a new input when connected.

[General]

[Settings] > [General]

• [Language]: Sets the menu screen to the desired language.
  [User-defined Key 1]/ [User-defined Key 2]: You can customize the main menu to access your preferred menu easily. [User-defined Key 1] and [User- defined Key 2] appear at the left/right of the main menu.

• [SMART ENERGY SAVING]: Conserve energy by using a luminance compensation algorithm.

• [High]: Saves energy using the high-efficiency [SMART ENERGY SAVING] feature.

• [Low]: Saves energy using the low-efficiency [SMART ENERGY SAVING] feature.

• [Off]: Disables the feature.

• The value of energy-saving data may differ depending on the panel and panel suppliers.

• If you select the option of [SMART ENERGY SAVING] is [High] or [Low], monitor luminance becomes higher or lower depending on the source.

• [Deep Sleep Mode]: When [Deep Sleep Mode] is enabled, power consumption is minimized while the monitor is in standby mode.

• [On]: Enables [Deep Sleep Mode].

• [Off]: Disables [Deep Sleep Mode].

• [Power LED]: When the Power LED function is turned on, it operates as follows:

• On Mode: Light up

• Sleep Mode (Standby Mode): Blinking

• Off Mode: Off

• [Automatic Standby]: If there is no operation on the monitor for a certain period, the monitor will automatically switch to standby mode.

• [Input Compatibility Version] : Set Input Compatibility Version to the same version as the connected external device.

• In the case of DisplayPort input, set it to 1.4 to use the HDR function.

• In the case of HDMI input, set it to 2.0 to use the HDR function.

• [Buzzer]: This feature lets you set the sound generated from Buzzer when your monitor powers on.

• [OSD Lock]: This feature disables the configuration and adjustment of menus.

• All features are disabled except [Brightness], [Contrast] in [Picture Adjust], [Input], [OSD Lock] and [Information] in [General].

• [Information]: The following display information will be shown; [Total Power On Time], [Resolution].

• [Open Source Software License]: If you click the [View], you can check the Open Source Software Notice information.

• [Reset to Initial Settings]: Returns to the default settings.

TROUBLESHOOTING

Nothing is displayed on the screen.

• Is the monitor’s power cord plugged in?
  • Check if the power cord is correctly plugged into the power outlet.
• Is the monitor’s adapter plugged in?
  • Make sure to use the adapter that is provided in the product package.
• Is the power LED on?
  • Check the power cable connection and press the power button. Is the power on and the power LED displaying red?
  • Check that the connected input is enabled ([Settings] > [Input]).
• Is the power LED blinking?
  • If the monitor is in sleep mode, move the mouse, or press any key on the keyboard, to switch the display on.
  • Check if the computer is turned on.
• Is the [The screen is not currently set to the recommended resolution.] message being displayed?
  • This occurs when signals transferred from the PC (graphics card) are out of the recommended horizontal or vertical frequency range of the monitor. Please see the PRODUCT SPECIFICATION section of this manual to set the appropriate frequency.
• Is the [No Signal] message being displayed?
  • This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect it.
• Is the [Out of Range] message being displayed?
  • This occurs when signals transferred from the PC (graphics card) are out of the horizontal or vertical frequency range of the monitor. Please see the Product Specification section of this manual to set the appropriate frequency.
• Do you see an “Unrecognized monitor, Plug and Play (VESA DDC) monitor found” message?
  • Have you installed the display driver?
  • Be sure to install the display driver from our website: http://www.lg.com.
  • Make sure to check if the graphics card supports the Plug and Play function.

The screen retains an image.

• Does image sticking occur even when the monitor is turned off?
  • Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image.
  • To extend the lifetime of the monitor, use a screensaver.

The screen display is unstable and shaky. / Images displayed on the monitor leave shadow trails.

• Did you select the appropriate resolution?
  • If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080p or the recommended resolution.

The display color is abnormal

• Does the display appear discolored (16 colors)?
  • Set the color to 24-bit (true color) or higher. In Windows, go to Control Panel > Display > Settings >Colour Quality. (The settings may differ depending on the operating system (OS) you use.)
• Does the display color appear unstable or monochrome?
  • Check if the signal cable is connected properly. Reconnect the cable or reinsert the PC’s graphics card.
• Are there spots on the screen?
  • When using the monitor, pixilated spots (red, green, blue, white, or black) may appear on the screen. This is normal for an LCD screen. It is not an error, nor is it related to the monitor’s performance.

Some features are disabled

• Are some functions not available when you press the Menu button?
  • The OSD is locked. Disable [OSD Lock] in [General].

No sound from the headphone port.

• Are images displayed using DisplayPort or HDMI input without sound?
  • Make sure that the headphone port connections are made properly.
  • Try increasing the volume with the joystick.
  • Set the audio output of the PC to the monitor you are using. On Microsoft Windows, go to Control Panel >Hardware and Sound > Sound > set the Monitor as the default device. (The settings may differ depending on the operating system (OS) you use.)

PRODUCT SPECIFICATION

Specifications are subject to change without notice.
The symbol means alternating current and the symbol means direct current.

Color Depth:

• HDMI: 8-bit/ 10-bit/ 12-bit color is supported.
• DisplayPort: 10-bit color is supported. 27GS85Q/27GS85QX

Resolution

• Max Resolution:
  • 2560 x 1440 @ 144 Hz (HDMI)
  • 2560 x 1440 @ 200 Hz (DisplayPort)
• Recommended Resolution:
  • 2560 x 1440 @ 144 Hz (HDMI)
  • 2560 x 1440 @ 180 Hz (DisplayPort)
• AC/DC Adapter
  • Model: DA-65G19
  • Manufacturer: Asian Power Devices Inc.
  • Model: ADS-65AI-19-3 19065E/
  • ADS-65FAI-19 19065EPG-1/
  • ADS-65FAI-19 19065EPK-1/
  • ADS-65FAI-19 19065EPCU-1
  • Manufacturer: SHENZHEN HONOR ELECTRONIC
  • Model: MS-V3420R190-065L0-DE/
  • MS-V3420R190-065L0-KR/
  • MS-V3420R190-065L0-US
  • Manufacturer: MOSO POWER SUPPLY TECHNOLOGY CO LTD
  • Output: 19 V 3.42 A

Environmental Conditions

• Operating Conditions
  • Temperature: 0 °C to 40 °C
  • Humidity: Less than 80 %
• Storing Conditions
  • Temperature: -20 °C to 60 °C
  •   Humidity: Less than 85 %
  • Dimensions: Monitor Size (Width x Height x Depth)
  • With Stand (mm): 613.5 x 577.7 x 253.7
  • Without Stand (mm): 613.5 x 371.6 x 51.3

Weight (Without Packaging)

• With Stand (kg): 6.2

• Without Stand (kg): 4.1

• Power Sources

• Power Rating: 19 V 3.3 A

• 32GS85Q/32GS85QX

  • Resolution

• Max Resolution:

  • 2560 x 1440 @ 144 Hz (HDMI)
  • 2560 x 1440 @ 180 Hz (DisplayPort)

• Recommended Resolution:

  • 2560 x 1440 @ 144 Hz (HDMI)
  • 2560 x 1440 @ 180 Hz (DisplayPort)

• AC/DC Adapter
  Model: DA-65G19

• Manufacturer: Asian Power Devices Inc.

  • Model: ADS-65AI-19-3 19065E/
  • ADS-65FAI-19 19065EPG-1/
  • ADS-65FAI-19 19065EPK-1/
  • ADS-65FAI-19 19065EPCU-1

• Manufacturer: SHENZHEN HONOR ELECTRONIC

  • Model: MS-V3420R190-065L0-DE/
  • MS-V3420R190-065L0-KR/
  • MS-V3420R190-065L0-US
  • Manufacturer: MOSO POWER SUPPLY TECHNOLOGY CO LTD
  • Output: 19 V 3.42 A

Environmental Conditions

• Operating Conditions
  • Temperature: 0 °C to 40 °C
  • Humidity: Less than 80 %
• Storing Conditions
  • Temperature: -20 °C to 60 °C
  • Humidity: Less than 85 %
  • Dimensions: Monitor Size (Width x Height x Depth)
  • With Stand (mm): 713.9 x 611 x 253.7
  • Without Stand (mm): 713.9 x 428.2 x 54
• Weight (Without Packaging)
  • With Stand (kg): 7.5
  • Without Stand   (kg): 5.6
• Power Sources
  • Power Rating: 19 V 3.3 A

Supported Mode

(Preset Mode, HDMI)

Resolution| Horizontal Frequency (kHz)| Vertical Frequency (Hz)| Polarity (H/V)| Remarks
---|---|---|---|---
640 x 480| 31.469| 59.940| -/-|
800 x 600| 37.879| 60.317| +/+|
1024 x 768| 48.363| 60.004| -/-|
1920 x 1080| 67.500| 60.000| +/+|
2560 x 1440| 88.787| 59.951| +/-| Recommended Timing

– Input Compatibility Version: 1.4

2560 x 1440| 111.857| 74.971| +/-|
2560 x 1440| 182.996| 119.998| +/-|
2560 x 1440| 218.290| 143.991| +/-| Recommended Timing

– Input Compatibility Version: 2.0

If you use an input timing that is outside the supported frequency, you may experience poor response speed or image quality.

(Preset Mode, DisplayPort)

Resolution| Horizontal Frequency (kHz)| Vertical Frequency (Hz)| Polarity (H/V)| Remarks
---|---|---|---|---
640 x 480| 31.469| 59.940| -/-|
800 x 600| 37.879| 60.317| +/+|
1024 x 768| 48.363| 60.004| -/-|
1920 x 1080| 67.500| 60.000| +/+|
2560 x 1440| 88.787| 59.951| +/-|
2560 x 1440| 150.919| 99.946| +/-|
2560 x 1440| 182.996| 119.998| +/-|
2560 x 1440| 222.151| 143.973| +/-| Recommended Timing

– Input Compatibility Version: 1.2

2560 x 1440| 257.327| 165.059| +/-|
2560 x 1440| 282.879| 180.063| +/-| Recommended Timing

– Input Compatibility Version: 1.4

2560 x 1440 (only 27GS85Q/27GS85QX)| 315.221| 200.013| +/-| Recommended Timing

– Input Compatibility Version: 1.4 (O.C)

HDMI Timing (Video)

Resolution| Horizontal Frequency (kHz)| Vertical Frequency (Hz)| Remarks
---|---|---|---
480P| 31.5| 60|
720P| 45| 60|
1080P| 67.5| 60|
1080P| 135| 120|
2160P| 135| 60|

• The model and serial number of the product are located on the back and one side of the product.
• Record them below in case you ever need service.
• Model———————–
• Serial No————–
• www.lg.com
• Copyright 2021 LG Electronics Inc. All Rights Reserved.

Documents / Resources

| LG 27GS85Q 27 Inch UltraGear Gaming LED Monitor [pdf] Owner's Manual
27GS85Q, 32GS85Q, 27GS85QX, 32GS85QX, 27GS85Q 27 Inch UltraGear Gaming LED Monitor, 27GS85Q, 27 Inch UltraGear Gaming LED Monitor, Gaming Monitor, Monitor
---|---

References

• Computer Products & Accessories: Locks & Docks | Kensington
• Consumer Electronics, Home & Kitchen Appliances | LG AU
• LG Open Source

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>