VPINSTRUMENTS VPFlowScope M Flow Meter User Manual
- July 24, 2024
- VPINSTRUMENTS
Table of Contents
VPINSTRUMENTS VPFlowScope M Flow Meter
Specifications
- Model: VPFlowScope M
- Manufacturer: Van Putten Instruments BV
- Transmitter Type: VPFlowScope M
- Output: Analog 4-20mA, Alarm, Impulsion, RS-485, Ethernet, USB
- Display: LED
- Communication: Modbus
- Software: VPStudio
Product Usage Instructions
1. Installation:
Follow the installation instructions provided in the manual for proper setup.
2. Assembling the Instrument:
Refer to the assembly section in the manual for step-by-step instructions on assembling the instrument.
3. Replacing VPSensorCartridge:
When replacing the VPSensorCartridge, ensure the device is powered off and follow the cartridge replacement steps mentioned in the manual.
4. LED Usage and Display:
Use the LED display to monitor device status and readings. Refer to the LED section in the manual for detailed information.
5. Software Usage:
Utilize the VPStudio software for data recording and analysis. Follow the software instructions provided in the manual for proper usage.
Frequently Asked Questions
- Q: How do I calibrate the VPFlowScope M?
- A: Calibration instructions can be found in the user manual.Typically, calibration involves adjusting the device settings to match a known reference value.
- Q: Can I connect multiple VPFlowScope M devices together?
- A: Yes, you can connect multiple devices using the RS-485 communication interface. Refer to the manual for guidance on setting up a multi-device network.
- Q: What is the purpose of the USB port on the VPFlowScope M?
- A: The USB port can be used for firmware updates or connecting the device to a computer for data transfer. Consult the manual for detailed USB usage instructions.
Read User Manual Online (PDF format)
Loading......