Huashengtimes H21 Outdoor Mobile Power Lighting Radio User Manual

Huashengtimes H21 Outdoor Mobile Power Lighting Radio

Product Information

Specifications

• Manufacturer: Shenzhen Huashengtimes Electronic Technology Co., LTD
• Email: Luft_3036@outlook.com
• Bluetooth Version: 5.3
• Bluetooth Transmission Distance: 10m-15m
• USB Charging Port: 5V
• Input for USB Output Port: 5V/3A or less

Product Usage Instructions

1. Flashlight Control
   Press the button to toggle between high beam, low beam, and combined high/low beams.

2. Reading Light:
   Press the button to switch on or off the reading light.

3. SOS Alarm
   Long press the button for 2 seconds to activate the alarm, short press to deactivate.

4. Bluetooth
   Long press the BT button for 3 seconds to turn on Bluetooth, follow instructions for connection.

5. USB Charging
   Connect a 5V charger to the USB charging port to charge the unit.

6. Headphone Jack
   Connect headphones to the 3.5mm headphone jack for audio output.

7. USB Output Port
   Connect electronic devices with an input of 5V/3A or less to charge them.

8. FM/AM Channel Switch:
   Toggle the switch key to switch between FM and AM channels.

9. Radio Control
   Rotate the radio on/off knob to turn on the radio and adjust volume; use the tuning knob to search for stations.

10. Solar Charging Panel
    Aim the panel at sunlight for automatic charging; orange indicator lights up during charging.

11. Compass:
    Use the built-in compass for directional guidance.

12. Hand Crank Generator
    Turn the hand crank to charge the unit; orange indicator lights up during hand crank charging.

Note : Hand crank and solar charging are for emergencies, while USB charging is for non-emergencies.

Frequently Asked Questions (FAQ)

• Q: How do I connect Bluetooth to my device?
  A: Long press the BT button for 3 seconds to turn on Bluetooth, search for device H21 on your phone’s Bluetooth settings, and connect once detected.

• Q: How do I charge electronic devices using the USB output port?
  A: Connect devices with an input of 5V/3A or less to the USB output port using a compatible charging cable.

(EN)User Manual （H21）

MADE IN CHINA

Manufacturer Name : Shenzhen Huashengtimes Electronic Technology Co., LTD
Address : 1209, Block C, Building 5, Huaqiang Creative Park, Biyan Community, Guangming District, Shenzhen
Email: Luft_3036@outlook.com

EC/REP
TESmert GmbH
Address: Reinbeker Weg 72 Erst Obergeschoss, 21029 Hamburg, Germany
Email: schauva@gmx.de

EC/REP
TESmert GmbH
Address: Reinbeker Weg 72 Erst Obergeschoss, 21029 Hamburg, Germany
Email: schauva@gmx.de

Thank you for choosing our products.

• For your convenience, please read the manual carefully and follow the steps.
• No matter what problems you encounter when using, please contact us, we are always ready to serve you.

WARNING: Do not place this product in a fire or high temperature container to avoid fire or explosion.

Maintenance & Cleaning

• Do not use this product in high humidity areas such as bathrooms.
• This product is not waterproof, please do not wash it with water.
• Do not wipe the surface with chemical reagents such as alcohol, thinner or benzene.
• The socket with dirt will lead to poor contact and power loss so that it can not be charged, please clean it regularly.
• Please use regular brand qualified charger.
• If there is any quality problem, please contact the seller, please do not disassemble it by yourself.

Introduction to Buttons and Functions

1. Flashlight High Beam and Low Beam Control Button: The first time you press this button to turn on the high beam of mark ⑬; The second time you press this button to turn off the high beam and turn on the low beam of mark ⑫; The third time you press this button to turn on the high beam and the low beam at the same time; The fourth time you press this button to turn off the high beam and the low beam.

2. Reading Light Button: Press this button to switch on the reading light ⑪, press this button again to switch off the reading light.

3. SOS Button: Long press this button for 2 seconds, the alarm will beep and flash at the same time, short press this button to close the SOS alarm.

4. BT Button: Long press the BT button for 3 seconds to turn on Bluetooth, open the phone Bluetooth to search for device “H21”, click “H21” to connect Bluetooth, after you hear the beep, the Bluetooth connection is successful, blue indicator light at the display position; Long press the BT button for 3 seconds to turn off the Bluetooth. (Bluetooth Version 5.3, the transmission distance of Bluetooth is 10m-15m, your phone will be automatically connected to Bluetooth “H21” when your next use)
   (Note: Before turning on Bluetooth, you need to rotate the ⑨ knob to turn on the power; Rotate the ⑨ knob to turn off the power can be directly off the Bluetooth）

5. USB Charging Port: Please use a 5V charger to connect the USB charging cable to charge the unit.

6. 3.5mm Headphone Jack: Please connect the headphones to use it.

7. USB Output Port: Connect the USB charging cable here to charge electronic devices with an input of 5V/3A or less.

8. FM/AM Channel Switch Key: Toggle it to switch channels FM/AM.

9. Radio On/Off Knob: Rotate this knob to turn on the radio and adjust the volume level.

10. Radio Tuning Knob: Turn this knob to search for radio stations.
    (Caution: Recommended to pull out the tie rod antenna after switching on the radio, for better reception of radio signals)

11. Reading Lamp

12. Flashlight Low Beam

13. Flashlight High Beam

14. Solar Charging Panel: Aim the solar charging panel at the sunlight, the solar charging panel will automatically charge the machine, when the solar charging panel is charging the display position orange indicator lights up.

15. Compass

16. Hand Crank Generator: Turn the hand crank clockwise or anti-clockwise to start the hand crank generator to charge the unit, the orange indicator light in the display position during hand crank charging. (Attention: Hand crank power and solar charging are recommended for emergencies, charging via USB is recommended for non-emergencies.) Screen Features

17. Power Indicator: This machine has a four-grid power display, if the last display light flashes, it means the battery is dead, please charge it in time.

18. Working Indicator Lights: The power display grid jumps when USB charging; the red indicator light is on when the power output is on, and the battery display grid lights up. Hand crank charging orange light is on; Solar charging orange light is on; Bluetooth on blue light is on.

19. Radio Band Scale Display Bar: the scale bar shows the position of the band you have searched.

After-Sales Service

This product is made of high quality material and has been fully inspected before shipment.
We offer 6 months warranty, if there is any problem with the product, please contact us and we will provide you with a refund or a new replacement for your satisfaction.

Product Parameters

Frequency Range

| FM:87-108MHz|

Time to Fully Charged

| USB: 4H
---|---|---|---
AM:520-1710KHz| Hand-Cranked: 40H
Product Size| 15682.599mm| Solar:                 91H(Under Full

Sunlight)

Weight| 732g
Battery Capacity| 16000mAh|

Function Usage Time After Fully Charged

| Radio: 150H
Solar Power| 5V/0.65W/130mAH| High Beam Flashlight: 49H
USB Output| 5V/3A| Low Beam Flashlight: 118H
USB Input| 5V/3A| Bluetooth Playback: 48H

LED Lighting Brightness

| High Beam: 600LUX| Reading Lamp: 39H
Low Beam: 150LUX| Hand-Cranked

Generator

| 5V/1.5W/300mAh
Mixed Beam: 650LUX

Frequently Asked Questions & Answers:

• Q:Is there a memory function?
  A:There is a memory function, when switching on the machine, it still keeps the last channel before switching off.

• Q:Can I use the radio function when the radio is charging my phone?
  A:You can listen to the radio when the radio is charging your phone, but charging will cause interference and the signal will deteriorate.

• Q:Why is the compass not pointing accurately?
  A:①The magnetism on the compass has disappeared. Generally, the magnetism may disappear only after high temperature baking. ② Compass shaft has burrs, stuck and can not move.
  The result of these two is that the compass does not respond and can not move, if the compass can move is not the above problem.

If there is a magnetic field around the interference, it will fail, the magnetic field includes some electrical appliances, or magnetic material, or even around the mine, will lead to failure.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>