SWIT Electronics MAGIC4420 Heavy Duty Wheeled Light Stand User Manual

Table of Contents

SWIT-Electronics-MAGIC4420-Heavy-Duty-Wheeled-Light-Stand-
product

The Heavy Duty Wheeled Light Stand with Magic Boom Arm (Model: MAGIC4420) is a versatile lighting stand designed for professional use. It features a sturdy construction with a built-in buffer spring heavy-duty bracket and buckled-lock wheels for added stability and mobility. The stand is equipped with a 5/8 (16mm) Baby Pin Male and a 1-1/8 (29mm) Junior Pin Female, allowing for easy installation of various lighting equipment.
The stand has a maximum height of 14.4ft/4.4m and a folding height of 5.6ft/1.75m, making it suitable for various shooting scenarios. It has a maximum load capacity of 20kg, ensuring it can support heavy lighting fixtures securely.
The Magic Boom Arm, when retracted into the Main Rod, extends the stand to its maximum height of 14.4ft/4.4m. The boom arm has a length range of 118cm to 208cm, providing flexibility in positioning the lighting equipment.
The product comes with a sandbag to further enhance stability during use.

Unpack the Heavy Duty Wheeled Light Stand with Magic Boom Arm and all included accessories.
Ensure that the buckled-lock wheels are securely locked before use.
Extend the stand to the desired height by loosening the locking mechanisms on each section and pulling them apart. Make sure to tighten the locks after adjusting the height.
If using the Magic Boom Arm, extend it to the desired length by loosening the locking mechanism and pulling it out. Tighten the lock to secure the boom arm in place.
To retract the Magic Boom Arm into the Main Rod and achieve the maximum height, loosen the locking mechanism and push the boom arm back into the main rod. Tighten the lock to secure it.
Attach your lighting equipment to the 5/8 (16mm) Baby Pin Male or the 1-1/8 (29mm) Junior Pin Female, depending on compatibility.
Ensure that the weight of the lighting equipment does not exceed the maximum load capacity of 20kg.
Position the stand and adjust the angle of the lighting equipment as needed.
If additional stability is required, place the included sandbag on the bracket or base of the stand.
After use, fold the stand by loosening the locking mechanisms on each section and carefully collapsing them. Securely lock the sections for storage or transportation.

For further assistance or inquiries, please contact SWIT Electronics using the information provided:

SWIT Electronics Co., Ltd. – Phone: +86-25-85805753, Website: www.swit.cc, Email: [email protected]
SWIT Electronics America, Inc – Phone: 1-(408)260-8258,
Website: www.switusa.com,
Email: [email protected]
SWIT Electronics Europe GmbH – Phone: +49(0)20659799339,
Website: www.swit-europe.com, Email: [email protected]

For updates and additional information, you can also visit SWIT Electronics’ Facebook Page and Instagram accounts.

Model	MAGIC4420
Light connect pin	5/8’ Baby pin male and 1-1/8” Junior pin female
Height	175cm – 440cm
Boom arm	118cm – 208cm
Max load	Approx. 20kg
Sections	5 sections, φ4.8cm/4.2cm/3.5cm/3cm/2.5cm
Weight	18kg

| SWIT Electronics MAGIC4420 Heavy Duty Wheeled Light Stand [pdf] User Manual
MAGIC4420 Heavy Duty Wheeled Light Stand, MAGIC4420, Heavy Duty Wheeled Light Stand, Wheeled Light Stand
---|---