Lucec 12v Extra Low Voltage Instruction Manual

: July 20, 2024
: Lucec

Table of Contents

Lucec 12v Extra Low Voltage
Product Usage Instructions
Installation Steps
Installation & Operating Instructions
STARTER PACK INSTALLATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Lucec 12v Extra Low Voltage

Lucec-12v-Extra-Low-Voltage-product-image

Specifications

Product: 12V Extra Low Voltage LED Festoon
Part Codes: LEXFS10B27UK-01 / LEXFS5B27-01 / LEXFS3EX-01
IP Ratings: IP67 (Driver), IP44 (Festoon)
Warranty: 1 year standard warranty

Product Usage Instructions

Safety Instructions

When using the product outdoors, ensure it is connected in a suitable IP65 rated weatherproof box and to a RCD protected circuit.
Avoid placing the product near heat sources like gas or electric heaters, fireplace, candles, etc.
Do not secure wiring with staples or nails; use provided mounting means only.
Avoid letting lamps rest on cords or wires, and do not hang objects from the cord or festoon lights.
Ensure not to cover the product with any material when in use.
Read and follow all provided instructions.
The cord and cable are not user replaceable.

Installation Steps

Starter Pack Installation

Connect the power cord to the festoon light power cord.
Align groove with notch when connecting festoon lights or capping connectors and secure tightly.
Cap the female end if not connecting multiple festoon lights or the last set of connected lights.

Using Extension Cable Accessory LEXFS3EX-01

Connect the power cord to the extension cable.
Connect the extension cable to the festoon light power cord.

Connecting More Kits
Connect the power cord to the festoon light.

Installation Methods

Using a Guide Wire with S-Hooks or Zip Ties

Attach guide wire to structural support.
If connecting two or more kits, connect guide wire to festoon light.

Attached to a Structure
Secure the festoon light to a suitable structural support.

Installation & Operating Instructions

12V EXTRA LOW VOLTAGE LED FESTOON1
PART CODE : LEXFS10B27UK-01 / LEXFS5B27-01 / LEXFS3EX-01
This Luminaire contains a light source of Class

SAFETY INSTRUCTIONS

When using product outdoors, ensure product is connected in a suitable IP65 rated weatherproof box and connected to a RCD protected circuit.
Do not mount or place near gas or electric heaters, fireplace, candles, or other similar sources of heat.
Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. Install only using the mounting means provided.
Do not let lamps rest on the supply cord or on any wires.
Do not hang objects from the cord, wire, or festoon lights.
Do not use this product for other than its intended use.
Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
Do not cover the product with cloth, paper or any material not part of the product when in use.
Read and follow all instructions that are on the product or provided with the product.
The cord and cable are not user replaceable

REPLACING LIGHT BULBS

Replace light bulbs only during dry and calm weather conditions.
Unscrew existing bulbs by lightly holding the socket in one hand and twisting the bulb counter clockwise. Bulbs may be tight in the sockets. This is normal to prevent moisture from getting into socket.
Screw bulb into socket clockwise until top of socket forms a tight seal around the light bulb and bulb makes solid contact with socket. Only suitable for 12V LED light bulbs. Supplied with 12V 0.7W
Driver rated to 36W max – DO NOT INSTALL BULBS WHICH EXCEED TOTAL 36W ON SINGLE POWERED CIRCUIT.

$Lucec-12v-Extra-Low-Voltage-image $2$$