myCharge CTP225K-QSG 3 in 1 Wireless Charging Pad User Guide
- July 17, 2024
- myCharge
Table of Contents
myCharge CTP225K-QSG 3 in 1 Wireless Charging Pad
Specifications
- Includes: 20W power supply, 5′ USB-C to USB-C charging cable, 3-in-1 wireless charging pad
- Wireless Charging Surfaces: iPhones up to 10W, AirPods up to 5W, Apple Watches up to 2.5W
- Charges 3 devices at once
- Foldable design for Standby mode and hands-free viewing
Product Usage Instructions
- Charging Devices on the Pad:
- Plug the AC adapter into an outlet and insert the cable into the power input of the wireless charging pad.
- Place your iPhone, AirPods, or Apple Watch on the respective wireless charging surfaces.
- Charging should begin automatically. The LED indicators will show the charging status of each device.
- If charging an Apple Watch, it can be placed flat, on a dock, or a folded stand.
- To charge the Apple Watch vertically, lift the watch dock.
- You can fold the pad to create a stand for convenient charging.
- Charging Devices on the Stand:
- Use the stand to charge two devices simultaneously, such as an iPhone and an Apple Watch.
- The foldable design allows for Standby mode and hands-free viewing while charging.
- Warranty & Safety Information:
- Refer to CTP225K-QSG for warranty and safety details.
FAQs
- Q: Do I need to use a specific type of power supply with this charging pad?
- A: It is recommended to use the included 20W power supply for optimal performance and safety.
INCLUDES
-
20W power supply
-
5’ USB-C to USB-C charging cable
-
3-in-1 wireless charging pad
-
Plug the AC adapter into the outlet & insert the cable into the power input
LED INDICATORS
CHARGING DEVICES-PAD
Charging should begin automatically
Charges 3 devices at once
FOLD PAD TO CREATE STAND
CHARGING DEVICES-STAND
- Charges 2 devices at once Charges iPhone & Apple Watch
- Foldable design for Standby mode and hands-free viewing
WARRANTY & SAFETY INFORMATION
- WARRANTY INFORMATION: At myCharge, we’re dedicated to making the highest quality products possible. In that, we provide a one-year limited warranty from the date of purchase. Keep a copy of your receipt as proof of purchase register your product at mycharge.com and check for the latest product updates as they develop. Failure to register your product and/or to provide proof of purchase may void the warranty. Warranty Instructions and Information visit: mycharge.com/warranty and select your model.
- MYCHARGE SUPPORT: support.mycharge.com.
- WARNING: Read all instructions and warnings before using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, or explosion, for which myCharge is not responsible.
- Do not expose the battery to heat sources, extended direct sunlight, or other high-temperature environments.
- Avoid drops and excessive impacts to the battery.
- Do not disassemble, attempt to repair or replace any part of the housing or battery.
- Do not attempt to charge the battery using any other method, apparatus, or connections other than the device’s charging cable.
- Never dispose of batteries in the garbage. This is unlawful under state and federal environmental laws and regulations. Always take used batteries to your local battery recycling center.
FCC
FCC COMPLIANCE:
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: Changes or modifications not expressly approved by myCharge could void the user’s authority to operate this equipment. myCharge is a registered trademark of RFA Brands, LLC. ©2024 myCharge. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>