Hycontrol HY08AC Central Air Conditioning Thermostat Instruction Manual
- July 18, 2024
- Hycontrol
Table of Contents
Hycontrol HY08AC Central Air Conditioning Thermostat
INSTRUCTION MANUAL
The WIFI fan coil unit thermostat is designed to provide convenient control over the temperature and fan speed of your fan coil unit through a WiFi connection. It offers various features such as mode switching, fan speed selection, timer settings, and advanced options for customization.
Technical data
- Voltage: AC90~240V,
- Output：On/off type
- Current: 3A
- Display temperature range：0~70°C
- Accuracy: ±0.5ºC
- Work environment:：-10~60°C
- Setting range: 5ºC – 35ºC
- Size：86 * 86mm
- Sensor:： NTC(10k)1%
Button
Operation
Program mode setting
Thermostat support set different time and different temperature；Compatible with 5+2,6+1,7days
Program mode type
Advanced Option
Turn off thermostat ,long press to enter advanced setting options, Short press to set next item, press“ ∧ ”or“ ∨ ”to set item data
Cautions on Installation:
1.To prevent the thermostat display from a high fluctuation, special treatment
has been made to the program. Therefore, it is normal that the thermostat
cannot immediately display the sudden change of temperature.
2. The thermostat installed on 1.5m above the ground.
3.For the thermostat installed,please take care not to install it to the wall
corner, door / window side or behind the door or in such unheated area as
exterior wall. Avoid hot / cold air duct, radiator, flue or thermal pipe
4 When install the power supply, make sure that the power cable is well
insulated.
5.Don’t open the internal circuit board..
6.HYAC series thermostat design for the standard 75x75x 35mm wall mount box
installed. Follow the instructions to open the rear cover base, mount it on
the wall and wire it.
7.Before installing the thermostat, make sure that the system is disconnected.
The maximum voltage of the system shall meet the requirements specified in the
Instruction Manual (Max. AC Voltage: 250V).
Installation diagram:
Specifications
-
Voltage: AC90~240V
-
Output: On/off type
-
Current: 3A
-
Size: 86 * 86mm
-
Sensor: NTC(10k) ± 1%
-
-
FAQ
Q: How do I enter matching wifi mode?
A: Press the power key and fan speed selection key together to enter matching wifi mode.
Q: How can I set the temperature calibration?
A: Turn off the thermostat, long press for 5 seconds to enter advanced settings, then use short presses to navigate to item A1 for temperature calibration.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>