akyga AK-OT-01A Electrical Power Cable User Manual

: July 17, 2024
: akyga

Table of Contents

Symbols explanation:
Safety Precautions
Documents / Resources

akyga AK-OT-01A Electrical Power Cable User Manual

https://www.akyga.com/products/87-for-pc/102-cords-and-cables/12-power- supplies-cables/

www.akyga.com

Symbols explanation:

There is a particular danger connected with service.

There is a risk of losing health or life (e.g. by electic shock).

Important tips and information.

The CE standard description on the product is the manufacturer’s declaration that the marked product meets the requirements of the directive so-called The “New Approach” of the European Union (EU). For security and certification (CE) reasons, the device can not be rebuild or change in any way. In the reason of using the power supply for other purposes than those described, the product may be demaged. The incorrect use may also cause hazard such as short- circuits, burns, electric shocks, etc. Read the users manual carefully and keep it for later use. The product could be share to third partie only with the user manual included.

Product accordance with the EU directive 2002/96/EC. The symbol of the crossed out basket placed on the product means that the marked product can not be disposed of with other household waste. After use, the product must be return to collection point for used electical and electronic equipment or to the seller. Appropriate segregation of rubbish for subsequent processing, recovery or descrution contributes to avoiding negative effects on the environment and health, and also allows the recovery of raw materials from which the product is made.

The RoHS mark on the product is the manufacturer’s declaration that the marked product meets the requirements of the EU Restriction of Hazardous Substances (2002/95/EC) directive, which aims to reduce the amount of hazardous substances penetrating into the environment from electrical and electronic waste.

The device is intended only for domestic use, indoors.

Safety Precautions

WARNING! Product heats up during operation. To reduce the risk of burns or overheating the power supply, do not place it in restricted ventilation area. Also, do not allow the working cable to touch soft surface such as pillows, blankets or clothing. The power supply meets the limits on the surface temperatures available to the user, as defined in the International Standard for Safety of Information Technology Equipment (IEC 60950).

An electrostatic discharge occurs when two object touch each other, for example, an electric charge that occurs when user touch metal door handle after walking on a carpet . Discharging electrostatic charges from fingers or other electrostatic conductors can damage electronic components. To avoid damaging the computer, abstain from touching electrical outlets, wires and electonic circuits. The user’s contact with electronic components should be kept to a minimum.

The manufacturer of the product is not responsible for damage or insults caused in effect of disobey the safety instructions and informations contained in these user manual.

Keep the product and the packaging out of range of children and animals. The package includes a foil that child could choke while playing.
It is forbidden to apply the mechanical load to the product – strong shocks, impacts, dropping or crushing may cause its damage.
The product operation in adverse conditions is not allowed. Adverse conditions are primarily: exposure to direct sunlight, high or very low ambient temperatures, strong vibrations, high humidity, surrounds of gases, dusts or flammable and aggressive liquids.
If the product has been damaged, does not work properly or has been stored for a long period of time in bad or unfavorable conditions, safe operation of the device is not possible. It is essential to stop using the product and to protect it against re-use for security purposes.
Product should not be touched with moist or wet hands under no circumstances.
Make sure that the power cord is not crushed, bent, twisted, rubbed against sharp edges or mechanically loaded in any other way. Avoid thermal load of the cable – in particular keep away from heat sources (such as stoves, radiators, fireplaces).
Power cords should be laid in such a way as to eliminate the risk of stumbling or hooking over.
Its forbidden to modify the power cord. In the case of modifications, the cable may be damaged, causing threats to life, health and property.
In case of any doubts regarding operation, safety or connection of the product, please contact the manufacturer or a qualified specialist for this purpose.
All maintenance, adjustment and repair work on the product may only be carried out by a qualified person in a specialist facility.

Product manufacturer: Akyga Europe sp. z o.o. ul. Wrocławska 1c 52-200 Suchy Dwór

Documents / Resources

| akyga AK-OT-01A Electrical Power Cable [pdf] User Manual
AK-OT-01A Electrical Power Cable, AK-OT-01A, Electrical Power Cable, Power Cable, Cable
---|---