JMRC036-27-1 Remote Control Cupcake Car Instruction Manual
- July 16, 2024
- Cupcake
Table of Contents
JMRC036-27-1 Remote Control Cupcake Car
Thank you for purchasing the Remote Control Cupcake Car. This manual provides more information about this RC Cupcake Car, please read the instructions before using.
Product Overview & Package Contents
- Remote Control Cupcake Car x 1
- Remote Controller x 1
- Instruction Manual x 1
Installation
Remote Controller & Batteries Installation
- Remote Controller: Requires 2 x 1.5V
- AA Size Alkaline Batteries (Not Included)
Race Car Power On/Off & Batteries Installation
Power On/Off
Slide the ON/OFF Switch to ON to turn on the Remote Control Race Car.
- RC Cupcake Car: Requires 3 × 1.5V
- AAA Size Alkaline Batteries (Not Included)
Notice:
When placing the batteries, you must insert according to the correct polarity, the Remote Control Race Car won’t function if batteries are reversed.
Operate Your Car
B. ROTATE BACKWARD
Press the ROTATE BACKWARD button to move rotate backward the car
Care and Maintenance
- Always use a dry and soft cloth to clean this product.
- Avoid this product from being exposed to sunlight or heat.
- Check the product regularly. If any damages are discovered, please stop using it immediately, until it is completely repaired in good working condition.
IMPORTANT: BATTERY INFORMATION
For AAA Batteries:
WARNING: TO AVOID BATTERY LEAKAGE
- The batteries used with this product are small parts and should be kept away from small children who still put things in their mouths. If they are swallowed, promptly see a doctor and have the doctor phone American Association of Poison Control Centers (1-800-222-1222).
- Always purchase the correct size and grade of battery most suitable for intended use.
- Do not mix old and new batteries, alkaline, standard (Carbon -Zinc) or rechargeable (Nickel-cadmium) batteries.
- Clean the battery contacts and those of the device prior to battery installation.
- Ensure the batteries are installed correctly with regard to polarity (+ and -).
For AA Batteries:
WARNING: TO AVOID BATTERY LEAKAGE
- Be sure to insert the batteries correctly, and always follow the toy/game and battery manufacturers’ instructions.
- Do not mix old and new batteries or alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
- Always remove weak or dead batteries from the product.
- Remove the battery if the product is left unused for a long period of time.
WARNING
- This product is suitable to be used by people who has operating experience in remote toys or aged no less than 8 years old.
- Please do not put the product in your mouth to prevent the choking hazard of small parts.
- Please do not put your finger into available interspaces.
- Please do not play the product in a brutal way such as throwing, crashing or twisting it.
- Please reth smaller, ed product accessories in laces that accidents.
- Avoid placing the batteries in places in high temperatures and avoid exposure to heat.
- When young children are operating the product, it shall be ensured that the adults are guiding and making sure the product control is within the viewing range of the controller (or instructor) so that it makes the control of the toy more convenient.
- When the product is not in use, please switch off the power supplies of the toy, and remove the batteries from the product.
- Please note that we won’t take any responsibility for any wrong operation as this may result in severe injury or loss of property, and we cannot control the operating process during the time when the user assembles or uses this product.
- Once this product is sold, we won’t be responsible for any safety responsibility during the time the user operates or controls this products.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- one the equipment into an out on a circuit altered from
- that to which the receiver is connected.
Consult the dealer or experienced radio / TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Distributed By: 1616 Holdings, Inc.
- 701 Market Street, Suite 200
- Philadelphia, PA 19106
- Made in Shantou, China
Keep All Relevant Information for Future Reference
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>