Juniper Sierra Surfaces Solid Wood Slab Tables Installation Guide

: July 15, 2024
: JUNIPer

Table of Contents

Juniper Sierra Surfaces Solid Wood Slab Tables
Product Usage Instructions
Leg Installation
2-Piece Surface Installation
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Juniper Sierra Surfaces Solid Wood Slab Tables

Specifications

Product Name: Sierra Surfaces Solid Wood Slab Tables
Material: Wood
Installation: Leg Installation or 2-Piece Surface Installation
Leg Types: Seated-Height Angled Sleigh Legs, Angled Post Legs

Product Usage Instructions

Leg Installation

Place the tabletop with the bottom facing up on a soft surface to prevent scratching.
CAUTION: Heavy object. Use multiple persons for lifting.
Align the leg and brace pilot holes on the surface to locate the self-tapping screws for the bottom of the leg.
Secure the leg with the provided hardware. Note that measurements may vary due to unique handcrafted nature. Each leg should sit 6-12 inches from the head of the table.
Ensure the bottom of each leg sits inside the surface corner to avoid tripping hazards.

2-Piece Surface Installation

Place the tabletops with bottoms facing up on a soft surface to prevent scratching.
Lay joining hardware into slotted areas and tighten bolts.
Align legs and braces to the surface.
Secure with provided hardware. Note that measurements may vary due to unique handcrafted nature. Each leg should sit 6-12 inches from the head of the table.
The quantity of joining hardware may vary depending on the surface size.

FAQ

Q: Can I install the legs by myself?
A: It is recommended to use multiple persons for lifting due to the heavy nature of the tables.
Q: How do I avoid scratching the table during installation?
A: Place the tabletop on a soft surface with the bottom facing up to prevent scratches.
Q: What should I do if the measurements for aligning legs vary?
A: Due to each table being handcrafted uniquely, slight variations may occur. Ensure each leg sits within the specified distance from the head of the table for stability.

Sierra Surfaces
Solid Wood Slab Tables

Leg Installation

Place table top with bottom facing up on a soft surface to avoid scratching table.

Standing–Height Angled Sleigh Legs with Support Braces
Align leg and brace pilot holes on surface to identify location of self- tapping screws for bottom of leg. Secure with provided hardware.
Note: Since each table is handcrafted uniquely, measurements may vary when aligning legs at center. Each leg should sit 6-12in. from head of table.

Seated-Height Angled Sleigh Legs

Angled Post Legs
Note: Bottom of each leg should sit inside of surface corner to avoid tripping hazard.

2-Piece Surface Installation

Place tabletops with bottoms facing up on a soft surface to avoid scratching table.
Lay joining hardware into slotted areas and tighten bolts. Align legs and braces to surface. Secure with provided hardware.
Note: Since each table is handcrafted uniquely, measurements may vary when aligning legs at center. Each leg should sit 6-12in. from head of table. Quantity of joining hardware may vary depending on surface size.