Teamfdi ELI70-CR 7.0 Inch Resistive Touch Screen User Guide
- July 14, 2024
- Teamfdi
Table of Contents
Teamfdi ELI70-CR 7.0 Inch Resistive Touch Screen
Product Information
Specifications
- Model: ELI70-CR
- Power Input: 12V DC, 2.1mm, center positive, 1.2A min
- Video Input: HDMI (Type A Male)
- Touch Input: Mini USB Type B
Product Usage Instructions
Required Equipment
- HDMI Cable (Type A Male) to connect to the ELI for the video signal
- USB Cable (Mini USB Type B) to connect to the ELI for the touch screen operation
- 12V DC power input, 2.1mm, center positive, 1.2A min
- Your choice of computer, SBC, or PC, with digital video output (HDMI or DVI) and USB port for touch input
Getting Started
- Connect the HDMI cable from your SBC or PC to the ELI board.
- Connect the Mini USB Type B cable between your SBC and the ELI70-CR for touch input.
- Apply Power to ELI with a 12VDC +/- 5% 2.0A power supply.
- Power can be supplied via the 2-pin terminal block J8 or via the 2.1mm power jack P2 (center positive).
For troubleshooting tips, please visit the FDI support website at: FDI
Support Website.
We value your feedback! Feel free to send constructive comments to:
support@teamfdi.com.
Frequently Asked Questions (FAQ):
-
Q: What should I do if the touch screen is not responding?
- A: Check the Mini USB Type B connection between your SBC and ELI70-CR. Ensure the power supply meets the required specifications.
-
Q: Can I use a different power supply than the recommended one?
- A: It is recommended to use a 12VDC power supply with a minimum rating of 2.0A and within the specified tolerance for optimal performance.
ELI70-CR
Quick Start Guide
Getting your ELI up and running quickly!
Introduction
About ELI
ELI® is Future Designs, Inc.’s family of long-life, plug-and-play embedded
displays. ELI products are true modular embedded display solutions that
require no engineering or lead-time. All ELI products are compatible with a
wide range of single board computers including Raspberry Pi, BeagleBone Black,
i.MX and Windows-based units. FDI designed ELI as an embedded display option
that requires minimal development time to help customers reach production
quickly. Once a product is in production, FDI’s 10-15 year ELI product
availability guarantee helps ensure production schedules without the risk of
expensive or time consuming redesigns. Learn more about ELI at
TeamFDI.com/ELI
ELI Compatibility
ELI products are compatible with most single board computers, PCs and
operating systems. See https://www.teamfdi.com/product-details/eli70-cr
under the Compatibility tab for the results of FDI’s compatibility tests with
popular operating systems and platforms. Our results, as indicated in the
table, demonstrate ELI’s versatility but the table is not exhaustive. ELI
products are designed to work with any single board computer that has an HDMI
or DVI output. To submit a question about ELI’s compatibility with a platform
or operating system that is not included in the table, contact a member of the
FDI support team at Support@teamfdi.com
Required Equipment (Not Provided)
- HDMI Cable (Type A Male) to connect to the ELI for the video signal
- USB Cable (Mini USB Type B) to connect to the ELI for the touch screen operation
- 12V DC power input, 2.1mm, center positive, 1.2A min
- Your choice of computer, SBC, or PC, with digital video output (HDMI or DVI) and USB port for touch input
Getting Started with ELI70-CR
A few notes prior to powering up your SBC
- BeagleBone Black (and many other SBCs) will boot up and drive ELI without any software changes.
- Raspberry Pi requires a few additional steps which are listed in greater detail in the ELI Software Users Manual which can be found here: https://www.teamfdi.com/wp-content/uploads/ELI-Software-Users-Manual.pdf
- For additional information on specific SBCs, see our ELI Software Users Manuals.
- For help with all your ELI needs, please visit TeamFDI.com/ELI
ELI70-CR
Quick Start Guide
- Connect the HDMI cable from your SBC or PC to the ELI board.
- Connect the Mini USB Type B cable between your SBC and the ELI70-CR for touch input. (See Figure below.)
- Apply Power to ELI with a 12VDC +/- 5% 2.0A power supply such as the Digi-key PN: T1071-P5P-ND or Mouser PN: 552-PSA-24A-120-R (See Figure below). (Check the product website specification tab for this ELI to see the minimum power requirements.)
- Once you have verified or configured your SBC for the proper resolution, power on your SBC.
- The ELI display will power on and show the output from the SBC.
- Touch Screen Calibration should be performed in your operating system following one of the application notes (Linux, Windows 7, or Windows 10) found here: https://www.teamfdi.com/product-details/eli70-cr#documentation
Power may be supplied either via the 2-pin terminal block J8 or via the 2.1mm power jack P2 (center positive)
For troubleshooting tips, please visit the FDI support website at:
https://www.teamfdi.com/support/
We’d like your feedback and welcome constructive comments to:
support@teamfdi.com
- 05/17/2018
- Copyright ©2018, Future Designs, Inc.
- Rev. 2.2
References
- Home - FDI - Future Designs Inc.
- Support - FDI - Future Designs Inc.
- Home - FDI - Future Designs Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>