SANDVIK TH320 Underground Truck Owner’s Manual

SANDVIK TH320 Underground Truck

Product Specifications

• Model: Sandvik TH320 Underground Truck

• Capacity: 20,000 kg (maximum payload capacity)

• Speeds:

  • 1st gear: 5.1 km/h
  • 2nd gear: 9.0 km/h
  • 3rd gear: 15.7 km/h
  • 4th gear: 27.8 km/h

• Operating Weight:

  • Total: 22,600 kg
  • Front Axle: 16,770 kg
  • Rear Axle: 5,830 kg

• Loaded Weight:

  • Total: 42,600 kg
  • Front Axle: 21,100 kg
  • Rear Axle: 21,500 kg

• Engine: Mercedes OM 926 LA Tier 3

• Fuel Tank Capacity: 350 liters

• Filtration: Air Filtration

• Transmission: Manual transmission with electric remote shifting system

• Axles:

  • Front Axle: Dana 19D series with spring applied hydraulic
    operated brakes

  • Rear Axle: Dana 19D series with spring applied hydraulic
    operated brakes

• Tires: Size varies (subject to availability)

Product Usage Instructions

• Operating Conditions and Limits
  The Sandvik TH320 Underground Truck is designed to operate in standard environmental temperatures and altitudes as specified in the manual.

• Maintenance and Servicing
  Perform ground-level daily maintenance for safe servicing of the truck.

• Safety Guidelines
  Follow all safety guidelines provided in the manual while operating the vehicle.

• Loading and Unloading
  When loading the truck, ensure that the payload does not exceed the maximum capacity to maintain safe operation. Use appropriate equipment for loading and unloading materials.

• Driving and Speed Control
  Operate the truck at appropriate speeds based on the terrain and load conditions. Use the different gears available to control speed effectively.

Sandvik TH320 is a narrow 20 metric tonne truck designed for small and medium- sized hard rock mines, fitting in a 3 x 3 meter heading. Despite the relatively high payload capacity, this underground truck has the same overall width as most 15-ton trucks on the market. As all Sandvik underground mining trucks, it is designed to operate fully loaded and at high speeds on long spiral haulage ways with up to 20% gradients.
Available with a standard forward facing, open operator compartment or with an optional forward facing, fully enclosed and air conditioned cabin, Sandvik TH320 offers superior comfort without compromising visibility.

Advantages:

• Narrow size enables operation in 3×3 meter headings
• Excellent payload capacity reduces the need for additional trucks
• Efficient LED lights reduce eye fatigue and risk of collision, while long LED lifetime offers lower cost of ownership compared to halogen lights
• Ground-level daily maintenance for safer service
• Optional ejector box for tight backfill haulage

Specifications

• CAPACITIES
  • Maximum Payload capacity (SAE heaped 2:1) 20 000 kg
  • Standard dump box 10.5 m³
  • Dump box range 10.5 – 13.8 m³
• SPEEDS (LEVEL/LOADED)
  • 1st gear 5.1 km/h
  • 2nd gear 9.0 km/h
  • 3rd gear 15.7 km/h
  • 4th gear 27.8 km/h
• DUMP BOX MOTION TIMES & MOVEMENTS
  • Discharging time 14.0 sec
  • Dumping angle 65 °
• **OPERATING WEIGHTS ***
  • Total operating weight 22 600 kg
  • Front axle 16 770 kg
  • Rear axle 5 830 kg
• **LOADED WEIGHTS ***
  • Total loaded weight 42 600 kg
  • Front axle 21 100 kg
  • Rear axle 21 500 kg
• OPERATIONAL CONDITIONS AND LIMITS
  • Environmental temperature From -20°C to +45°C
  • Standard operating altitude With engine Mercedes OM 926 LA from -1500 m to +2500 m at 25 °C without rated power derate
• REQUIREMENTS AND COMPLIANCE
  • Compliance with 2006/95/EC Low voltage directive
  • Design based on EN 1889-1. Machines for underground mines. Mobile machines working underground. Safety. Part 1: Rubber tyred vehicles.
  • Electrical system based on IEC 60204-1. Safety of machinery –
  • Electrical equipment of machines – Part 1: General requirements
• CONTAINS FLUORINATED GREENHOUSE GASES (closed cabin option)
  • Refrigerant R134a under pressure max 38 bar/550 PSI:
  • Filled weight: 1,8 kg
  • CO2e: 2,574 tons
  • GWP: 1430
  • Information based on the F Gas Regulation (EU) No 517/2016

POWER TRAIN

• ENGINE
  • Diesel engine Mercedes OM 926 LA Tier 3
  • Output 240 kw (322 hp) @ 2200 rpm
  • Torque 1300 Nm @ 1300 rpm
  • Number of cylinders In-line 6
  • Displacement 7.2 1
  • Cooling system Liquid cooled
  • Combustion principle 4-stroke, direct injection, turbo, after cooler
  • Air Filtration Dry type
  • Electric system 24 V
  • Emissions Tier 3, Euro Stage III A
  • Ventilation rate (Ultra low sulphur diesel) CANMET 22,500 CFM m3/s (CSA Ventilation)
  • Exhaust system Catalytic converter with muffler
  • Average fuel consumption at 50 % load 30.0 l/h
  • Fuel tank refill capacity 350 l
• CONVERTER
  • Dana C8000 Series with Lock up
• TRANSMISSION
  • Manual transmission with electric remote shifting system.
  • Four forward and four reverse gears.
  • Dana 6000 Series
• AXLES
  • Front axle
  • Dana 19D series spring applied hydraulic operated brakes, equipped with standard differential, oscillation
  • Rear axle
  • Dana 19D series spring applied hydraulic operated brakes, equipped with standard differential, fixed
  • TIRES
  • Tire size (Tires are application approved. Brand and type subject to availability.) 18.0 R 25 E4

OPERATOR’S COMPARTMENT

• CABIN (Cabin option replaces the standard canopy)
  • ROPS certification according to EN ISO 3471
  • FOPS certification according to EN ISO 3449
  • Sealed, air conditioned, over pressurized, noise suppressed closed cabin
  • Sound absorbent material to reduce noise
  • Laminated glass windows
  • Cabin mounted on rubber mounts to the frame to reduce vibrations
  • Air conditioning unit located outside the cabin to reduce noise inside the cabin
  • Cyclone pre-filter for A/C device
  • No high pressure hoses in the operator’s compartment
  • Inclinometers to indicate operating angle
  • Emergency exit
  • Floor washable with water to reduce dust
  • Three-point contact access system with replaceable and colour coded handles and steps
  • Remote circuit breaker switch
• CANOPY (Standard)
  • ROPS certification according to EN ISO 3471
  • FOPS certification according to EN ISO 3449
  • No high pressure hoses in the operator’s compartment
  • Inclinometers to indicate operating angle
  • Emergency exit
  • Floor washable with water to reduce dust
  • Three-point contact access system with replaceable and colour coded handles and steps
  • Remote circuit breaker switch
• OPERATOR’S SEAT
  • Low frequency suspension
  • Height adjustment
  • Adjustment according to the operator’s weight
  • Fore-aft isolation
  • Padded and adjustable arm rests
  • Adjustable lumbar support
  • Selectable damping
  • Two-point seat belt
• DASHBOARD AND DISPLAYS
  • Critical warnings and alarms Displayed with light
  • Instrument Panel Electrical gauges, 2.8” Display
  • Instrument Panel Illuminated switches
  • My Sandvik Digital Services Knowledge Box™ on-board hardware Option
• FRAME
  • REAR AND FRONT FRAME
  • High strength structure with optimized material thicknesses. Reduced own weight for higher overall hauling capacity and long structural lifetime. Welded steel construction.
  • Tanks Tanks are part of the frame structure
  • Automatic central lubrication Standard
• HYDRAULICS
  • Door interlock for brakes and box hydraulics Standard
  • Oil cooler for hydraulic and transmission oil
  • Capability up to 46°C ambient temperature
  • Fittings ORFS
  • Hydraulic oil tank capacity 378 l
  • Sight glass for oil level 1 pcs
• STEERING HYDRAULICS
  • Full hydraulic power steering, center articulated with double acting steering Cylinders. Open-center system with a gear pump and wheel steer control.
  • Steering main valve Pilot operated
  • Steering hydraulic cylinders 114 mm, 2 pcs
  • Steering pump Gear pump
  • Emergency steering Option
• DUMP BOX HYDRAULICS
  • Full hydraulic open-center system with one gear pump. Oil flows to the dump box hydraulic system from the pump when the steering system is not in use. Joystick dump box control.
  • Hydraulic pump Gear pump
  • Control valve Pilot operated
  • Main valve Pilot operated
  • Cylinders 159 mm, 2 pcs
• BRAKES
  • Service brakes are spring applied; hydraulically operated multi disc wet brakes on all wheels. Two independent circuits: one for the front and one for the rear axle. Service brakes also function as an emergency and parking brake.
  • Brake system performance complies with requirements of EN ISO 3450, AS2958.1 and SABS 1589
  • Neutral brake Standard
  • Automatic brake activation system, ABA Standard
  • Electrically driven emergency brake release pump Standard
  • Brake pedal valve Foot operated pedal, fully modulated

ELECTRICAL EQUIPMENT

MAIN COMPONENTS

• Alternator 24 V 150 A

• Batteries 2 X 12V, 950 CCA

• Starter 24 V, 5.5 kW

• Driving lights

  • LED lights:
  • 4 pcs in front
  • 2 pcs in rear

• Working lights LED light, 1 pc rear of cabin
  Reverse camera Option

• Parking, brake and indicator (blinkers) lights

  • LED lights:
  • 2 pcs in front
  • 2 pcs in rear

• Control system Color display, inbuilt system diagnostics

• Reverse alarm Standard

• Flashing beacon Standard

• Marker lights Standard

INCLUDED SAFETY FEATURES

• FIRE SAFETY
  • Portable fire extinguisher Standard, 6 kg
  • Hot side – cold side design Standard Isolation of combustibles and ignition sources Standard
  • Heat insulation on exhaust manifold, turbo, and isolated exhaust pipe Standard
• ENERGY ISOLATION
  • Lockable main switch, ground level access Standard
  • Emergency stop push buttons according to EN ISO 13850 Standard
  • Pressure release in the radiator cap Standard
  • Automatic discharge for pressure accumulators (brake system and pilot circuit) Standard
  • Frame articulation locking device Standard
  • Mechanical dump box locking device Standard
  • Wheel chocks and brackets Standard

DOCUMENTATION

• STANDARD MANUALS
  • Operator’s Manual English and other EU languages
  • Maintenance Manual English and other EU languages
  • Parts Manual English
  • Service and Repair Manual English
  • ToolMan 2 x USB stick in pdf format, includes all the manuals
  • Decals English and other EU languages

AVAILABLE BOXES

• With 90% fill factor
• Box capacity (m3) 10.5 m3 12 m3 13.8 m3 9.6 m3 ejector box
• Material broken density (kg/m3) 2120 kg/ m 1850 m3 1610 m3 1600 m3
• Total height (mm) 2350 2691 2490 2444

OPTIONS

• Spare rim 13.00-25/3.0 (for tyres 18.0R25)
• Enclosed operator’s cabin with A/C and heater
• Cover grills for lamps
• Mercedes-Benz engine exhaust brake
• Harsh condition package (epoxy coated coolers, Ni Cr coated cylinders)
• Proximity Detection System Interface
• Jump start interface
• Wiggins fuel fill system
• Fire suppression system ANSUL, 1 tank, 6 nozzles, including auto shutdown
• Fire suppression system ANSUL, 1 tank, 6 nozzles, CHECKFIRE, including auto shutdown
• Eclipse™ fire suppression system with auto shut down, Sustain or
• Extreme agent delivered separately
• Reversing camera
• Emergency steering
• My Sandvik Digital Services Knowledge Box™: on-board hardware

GRADE PERFORMANCE
Mercedes OM 926 LA Tier 3 (3% rolling resistance assumed, with lock-up engaged)

Empty

• Percent grade 0.0 4.0 8.0 10.0 12.5 14.3 17.0 20.0
• Ratio 1:12 1:10 1:8 1:7 1:6 1:5
• 1st gear (km/h) 5.1 5.1 5.0 5.0 5.0 5.0 5.0 4.9
• 2nd gear (km(h) 9.1 9.0 8.9 8.9 8.8 8.8 8.7 8.6
• 3rd gear (km/h) 15.9 15.6 15.3 15.2 14.8 14.0 12.9 11.4
• 4th gear (km/h) 28.4 27.5 23.2 19.7

Loaded

• Percent grade 0.0 4.0 8.0 10.0 12.5 14.3 17.0 20.0
• Ratio 1:12 1:10 1:8 1:7 1:6 1:5
• 1st gear (km/h) 5.1 5.0 5.0 4.9 4.9 4.9 4.8 4.8
• 2nd gear (km(h) 9.0 8.8 8.7 8.6 8.1 7.7 6.9 6.0
• 3rd gear (km/h) 15.7 15.2 12.4 10.4
• 4th gear (km/h) 27.8 19.3

DIMENSIONS WITH 10.5 M3 BOX

DIMENSIONS

| Standard|
---|---|---
Dump box alternatives (m³)| 10.5 m³| 12.0 m³| 13.8 m³
Material broken density (kg/m³) (FF 0.9)| 2120 kg/m³| 1850 kg/m³| 1610 kg/m³
L1 (mm)| 9080| 9080| 9232
L2 (mm)| 3119| 3119| 3119
L3 (mm)| 1372| 1372| 1372
L4 (mm)| 3048| 3048| 3048
L5 (mm)| 1542| 1541| 1693
H1 (mm)| 2497| 2497| 2497
H2 (mm)| 4973| 5095| 5019
H3 (mm)| 2350| 2691| 2490
H4 (mm)| 381| 381| 381
H5 (mm)| 382| 382| 382
H6 (mm)| 805| 805| 805
H7 (mm)| 442| 426| 291
W1 (mm)| 2234| 2210| 2591
W2 (mm)| 2134| 2108| 2489
W3 (mm)| 2210| 2210| 2210
W4 (mm)| 2180| 2180| 2180
A1| 13°| 13°| 13°
A2| 65°| 65°| 65°
A3| 44°| 44°| 44°
R1 (mm)| 4015| 4026| 3836
R2 (mm)| 7401| 7401| 7401
T (mm)| 4562| 4554| 4688

Sandvik Mining and Rock Technology reserves the right to make changes to the information on this data sheet without prior notification to users. Please contact a Sandvik representative for clarification on specifications and options.

TS3-TH320-11/ENG/METRIC © Sandvik Mining and Rock Technology 2017 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries Sandvik Mining

FAQ

Q: What is the maximum payload capacity of the Sandvik TH320?
A: The maximum payload capacity of the Sandvik TH320 is 20,000 kg.

Q: What type of engine does the Sandvik TH320 have?
A: The Sandvik TH320 is equipped with a Mercedes OM 926 LA Tier 3 engine.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>