CAECUS BLINDS Day and Night Blind Fixing Instructions
- July 13, 2024
- CAECUS BLINDS
Table of Contents
CAECUS BLINDS Day and Night Blind Fixing Instructions
FITTING INSTRUCTIONS
WHAT YOU’LL NEED
- ï PENCIL
- ï TAPE MEASURE
- ï DRILL AND 6MM BIT
- ï PHILIPS SCREWDRIVER
A: DECIDE WHERE YOUR BLIND WILL FIT.
INSIDE RECESS
OUTSIDE RECESS
B: APPLY THE STICKY PADS TO THE BACK OF EACH BRACKET (B1) AND APPLY LEVEL
TO THE WALL WHERE YOU WANT TO FIT YOUR BLIND. SPACE THE BRACKETS ABOUT 15CM
FROM THE END OF THE BLIND.
B.1:
B.2: IF YOU WISH TO ATTACH YOUR BLIND TO A DISPLAY BOARD FOLLOW THESE
INSTRUCTIONS.
C: CREATE YOUR HOLE WITH A 6MM DRILL BIT AND REMOVE THE BRACKET TO INSERT
THE RAWL PLUG.
REMOVE THE STICKY PAD AND SCREW THE BRACKET TO THE WALL.
D: PLACE THE BLIND IN AT A 45 DEGREE ANGLE TO THE BRACKETS AND THEN
ROTATE TO CLIP INTO THE BRACKETS.
E: ATTACH THE SAFETY CLIP TO A WALL AND ENSURE THE CHAIN IS TOUT AND
WITHOUT SLACK.
SAFETY CLEAT
ENSURE YOU USE THE WALL CLEAT PROVIDED TO TIE YOUR CORDS WHEN NOT IN USE.
ENSURE THE CORDS ARE OUT OF REACH OF CHILDREN AND MOVE ANY FURNITURE
PACKAGE CONTENTS ARE DEPENDENT ON WIDTH OF BLIND
DAY AND NIGHT BLIND 1
| BRACKETS | 2 | 3 | |
|---|---|---|---|
| EXTENSION BRACKETS | 2 | 0 | |
| SAFETY CLIP | 1 | 1 | |
| SCREWS + RAWL PLUGS | 6 | 8 | |
| STICKY PADS | 2 | 0 |
PLEASE NOTE:
THESE BLINDS ARE SUITABLE FOR FACEFIXING ONLY. THEY ARE NOT SUITABLE FOR
TRIMMING.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>