toocki TQ-PB06 Magnetic Portable Power Bank User Manual
- July 13, 2024
- toocki
Table of Contents
toocki TQ-PB06 Magnetic Portable Power Bank
Toocki Wireless Magnetic Power Bank S000mAh
Please read this user manual carefully before use and keep it properly.
Product Parameter
Brand: Toocki
Product Name: Wireless Magnetic Power Bank SO00mAh
Model No.: TQ-TB06
Capacity: S000mAh
Rated Capacity: 3000mAh
Material: ABS+ PC
USB-C Input: 5V 3A, 9V 2A(l8W Max.)
USB-C Output: SV 3A, 9V 2.22A, 12V 1.67 A(20W Max.)
Wireless Output: SW/7.SW/l0W/lSW Max.
Wiring Interface: USB-C to USB-C
Wiring Length: 30cm
Weight: About 120g
Product Size: About 103mm x 67.5mm x 10.5mm
The above data are measured by the Toocki laboratory, the actual use will be slightly different depending on the specific circumstances.
Package List
Wireless Magnetic Power Bank X1
USB-C Cable {30cm) X1
User Manual X1
Product Diagram
Product Features
S000mAh High Cell Capacity: Built-in high-capacity battery cell, a single full
charge can meet the power needs of a day out.
Wired & Wireless Charging Support: PD 20W wired fast charging can quickly
empowers devices, and 15W Max. wireless charging adapts to the phones that
support wireless charging.
Strong Magnetic Attraction: Made of N52H high strength magnet, solid and will
not fall off. (iP12-15 series can be directly adsorbed to use, Android and
other models are recommended to use with Magsafe phone case for better
suction.)
Compact Size : Do not jam the cell phone lens and reduce burdens for
traveling with its slim size.
LED Digital Display : Smart LED power digital display design, remaining
power can be visualized at a glance.
Charging Instructions
-
Charging the power bank: The built-in battery is partially charged at the factory, but you may need to charge it before you can use it.
-
Power up your devices with the power bank:
-
Wired charging: Simply connect the USB end of the charging cable to the USB port of the power bank.
(It is recommended to use it with a fast charging cable to achieve the better fast charging effect.) -
Wireless charging: Adsorption inductive charging by placing the phone on the power bank. (Adapted to support wireless charging devices.)
Precautions
- When charging the power bank or using it to charge other devices, please use the appropriate charger and data cable.
- When charging the power bank, please unplug it in advance when you go out or leave it unattended for a long time.
- After the power bank is fu lly charged, or after using it to fully charge other devices, please unplug the charging cable in time to prevent damage.
- If the digital display does not light up when the power button is pressed, please charge the power bank.
- When you do not use this power bank for a long time, please keep its battery power in the range of about 25% to 50% and store it in a cool and dry environment.
- Please do not disassemble the product by yourself. Improper use or placement may affect the battery life or damage the product, Toocki does not assume any legal responsibility for this, please understand!
- When wireless charging, there should not be any metal objects or materials between the back of the charging cell phone and the charging area (e.g. iron plates, rings, metal cell phone cases, etc.).
- When wireless charging, if there is disconnection or severe overheating, the receiving coil of the charging cell phone may not be fu lly aligned with the wireless charging coil, or there may be metal objects inside the cell phone case. Please try to cool down the phone first, remove the protective case, and then align it to the correct position.
Safety Instructions
- Please do not allow children to touch or use this power bank to avoid accidents.
- When charging the power bank, please make sure to use a charger that meets local safety standards to prevent electric shock or damage to the battery.
- Do not subject this power bank to pressure, impact, strong vibration or liquid damage, which may result in a short circuit or damage to the battery or circuit.
- When this power bank appears to be bulging, deformed, leaking liquid or its capacity is significantly reduced, please stop using it immediately and dispose of it properly.
- Do not charge or discharge this power bank in places that may affect its heat dissipation.
- Do not disassemble this power bank or subject it to pressure, shock, strong vibration, liquids, fire and other heat sources (such as stoves, heaters) or ambient temperatures above 140°F (60°C).
- Do not place this power bank supply in a car or other place in direct sunlight when it is hot.
Use ambient : 0°C to 25°C non-tropical areas.
Storage ambient temperatures : 0°C to 40°C.
WARNING
Please follow the above safety instructions otherwise it will cause fire,
electric shock, damage or other injury.
This equipment complies with the provisions of Directive 2012/19/EU. It is strictly forbidden to disposed of this equipment with general waste and must be recycled. This symbol indicates that this product cannot be used as regular domestic waste for disposal, and must be delivered to the corresponding waste recycling station that is capable of recycling electrical and electronic equipment.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in are sidential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is nonguaranteed that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The FCC certification of this device refers to RF exposure testing perfumed in typical operating conditions, where a person is no closer than 0 centimeters from the device surface at all times,except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>