myCharge 10000mAh Power and Go Power Bank User Guide
- July 10, 2024
- myCharge
Table of Contents
myCharge 10000mAh Power and Go Power Bank
Specifications
- Model: APM5W, APM10W-QSG
- Charging Ports: USB-C port, USB-A port
- LED Indicators: 4 solid, non-blinking LEDs
- Warranty: One-year limited warranty
Product Usage Instructions
Recharging Power & Go
- Connect the included recharging cable to any USB power source.
- Fully charged unit shows 4 solid, non-blinking LEDs.
- Three ways to recharge: Wall outlet, car, computer.
Charging Devices
Simply connect your device to the USB ports on the Power & Go unit to
charge it.
Safety and Warranty Information
- Warranty Information: myCharge provides a one-year limited warranty from the date of purchase. Keep your receipt as proof of purchase and register your product at mycharge.com for the latest updates.
- MyCharge Support: For warranty instructions and information, visit mycharge.com/warranty and select your model. Contact support at support.mycharge.com.
- Warning: Read all instructions and warnings before using the product to avoid damage or safety hazards. Improper use may result in product damage or hazards for which myCharge is not responsible.
- PROP65WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and other reproductive harm.
- FCC Compliance: Any changes or modifications not approved by myCharge could void the user’s authority to operate the equipment.
FAQ
-
Q: How can I check the battery level on the Power & Go unit?
A: Press the power button to see the battery level indicated by the LED lights. -
Q: What should I do if my product is not charging properly?
A: Check the charging cable, power source, and connections. If issues persist, contact myCharge support for assistance.
POWER & GO QUICK START GUIDE
RECHARGING POWER & GO
Connect the included recharging cable to any USB power source. Fully charged
unit shows 4 solid, non-blinking LEDs.
3 ways to recharge : Wall outlet, car, computer
LED INDICATORS
Press power button to see battery level
CHARGING DEVICES
Using your own cables, plug the USB end into the Power & Go and the other
end into your device. Charging should begin automatically – if it doesn’t,
press the power button.
Charges 2 devices at once:
- 1 via built-in USB-A Port
- 1 via USB-C Port
SAFETY AND WARRANTY INFORMATION
WARRANTY INFORMATION : At myCharge, we’re dedicated to making the highest
quality products possible. In that, we provide a one-year limited warranty
from the date of purchase. Keep a copy of your receipt as proof of purchase
and register your product at mycharge.com and check for
the latest product updates as they develop. Failure to register your product
and/or to provide proof of purchase may void the warranty.
Warranty Instructions and Information visit:
mycharge.com/warranty and select your model.
MYCHARGE SUPPORT: support.mycharge.com
WARNING: Read all instructions and warnings prior to using this product.
Improper use of this product may result in product damage, excess heat, toxic
fumes, fire or explosion, for which myCharge is not responsible.
- Do not expose Powerbank to heat sources, extended direct sunlight or other high-temperature environments.
- Do not expose Powerbank to extended low-temperature environments.
- Do not drop Powerbank and protect Powerbank from outside impact of any kind.
- Do not disassemble, attempt to repair or replace any part of the housing or power.
- Do not attempt to charge the Powerbank using any method, apparatus, or connectors other than those provided with the Powerbank.
- Never dispose of batteries in the garbage. This is unlawful under state and federal environmental laws and regulations. Always take used batteries to your local battery-recycling center.
PROP 65 WARNING : This product contains chemicals known to the state of
California to cause cancer, birth defects and other reproductive harm.
FCC COMPLIANCE : Warning: Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This Powerbank has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This Powerbank generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note : Changes or modifications not expressly approved by myCharge could
void the user’s authority to operate this equipment. myCharge is a registered
trademark of RFA Brands, LLC. ©2024 myCharge. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>