KitchenAid W11729759A Bottom Mount Built-In Refrigerator Panel Owner’s Manual
- July 10, 2024
- KitchenAid
Table of Contents
KitchenAid W11729759A Bottom Mount Built-In Refrigerator Panel
Specifications
- Maximum Weight: 26.5 lbs (12 Kg)
- Width: 600 mm (23.5 inches)
- Cabinet frame wall thickness: 16 mm
Product Usage Instructions
Freezer Door Panel Installation
- Mount the panel alignment tool onto the freezer door. Align the smaller piece with the screws on the bottom of the door, and slide it to the left.
- Peel the protective paper covers off of the adhesive pads on each freezer door panel mount.
- At an angle, rest the base of the freezer door panel on the panel alignment tool.
- Slowly tilt the panel to attach it to the adhesive pads on the panel mounts. Firmly press against the corners of the door to ensure proper attachment.
- Attach the freezer door with a panel by using only the upper 4 screws. Remove the tool from the freezer door by sliding it to the right and off of the door.
Refrigerator Door Panel Installation
- Mount the panel alignment tool onto the refrigerator door.
- Align the smaller piece with the screws on the bottom of the door, and slide it to the left.
- Peel the protective paper covers off of the adhesive pads on each refrigerator door panel mount.
- At an angle, rest the base of the refrigerator door panel on the panel alignment tool.
- Slowly tilt the panel to attach it to the adhesive pads on the panel mounts. Firmly press against the corners of the door to ensure proper attachment.
FAQ
Q: What is the maximum weight limit for the panels?
A: The maximum weight limit for each panel is 26.5 lbs (12 Kg).
Q: How do I align and install the door panels correctly?
A: To align and install the door panels correctly, follow the detailed instructions provided in the manual for each type of door panel (freezer and refrigerator).
REFRIGERATOR SAFETY
- WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS, located in your appliance’s Owner’s Manual, before operating this appliance.
- This manual covers several models. Your model may have some or all of the items listed. Depending on your model/brand, refer to this manual or Frequently Asked Questions (FAQs) section of our website at www.kitchenaid.com/owners or
www.jennair.com/create-account for more detailed instructions. In Canada, reference the Customer Service section at www.kitchenaid.ca/owners or www.jennair.ca/owners.
DOOR PANEL INSTALLATION AND ALIGNMENT
- Door Panels Requirements (each door)
Maximum Weight: 26.5 lbs (12 Kg)
Minimum Panels Dimensions:
- Refrigerator Door Panel: 417⁄8″ (1062.5 mm) x 23¼” (590 mm) x 3/4″ (20 mm)
- Freezer Door Panel: 283⁄8″ (720.5 mm) x 23¼” (590 mm) x 3/4″ (20 mm).
- For maximum dimensions, please review the following diagram.
Cabinet frame wall thickness 16 mm
minimum R1 [mm]| B [mm]
594| 593| 592| 591| 590
A [mm]| 16| 0| 0| 0| 0| 0
17| 0| 0| 0| 0| 0
18| 0| 0| 0| 0| 0
19| 0| 0| 0| 0| 0
20| 0| 0| 0| 0| 0
21| 0.4| 0| 0| 0| 0
22| 2.6| 2| 1.3| 0.7| 0
23| 5| 4.4| 3.8| 3.2| 2.6
24| 7.5| 7| 6.5| 6| 5.5
How to read this diagram:
- For example, if the door panel width dimension “B” is 593 mm and the thickness of door panel dimension “A” is 22 mm that means that the door panel requires a radius of “R1” minimum of 2 mm.
Door Panel Installation
- Assemble the panel alignment tool by inserting the long arm of the main piece into the cutout of the smaller piece, and adjust it so that the base is at the appropriate height, aligned with the base of the surrounding cabinet doors.
- Use a screwdriver to tighten the panel alignment tool’s 9.5 mm screw and hold it in place.
Freezer Door Panel Installation
- Mount the panel alignment tool onto the freezer door. Align the smaller piece with the screws on the bottom of the door, and slide it to the left.
- Peel the protective paper covers off of the adhesive pads on each freezer door panel mount. There are two adhesive pads on each of the four-panel mounts.
- At an angle, rest the base of the freezer door panel on the panel alignment tool.
- Slowly tilt the panel to attach it to the adhesive pads on the panel mounts. Firmly press against the corners of the door to ensure that the panel is properly attached to the adhesive pads.
- Attach the freezer door with a panel by using only the upper 4 screws. Loosen the panel alignment tool’s screw and remove the tool from the freezer door by sliding it to the right and off of the door.
Refrigerator Door Panel Installation
- Mount the panel alignment tool onto the refrigerator door.
- Align the smaller piece with the screws on the bottom of the door, and slide it to the left.
- Peel the protective paper covers off of the adhesive pads on each refrigerator door panel mount. There are two adhesive pads on each of the four-panel mounts.
- At an angle, rest the base of the refrigerator door panel on the panel alignment tool.
- Slowly tilt the panel to attach it to the adhesive pads on the panel mounts. Firmly press against the corners of the door to ensure that the panel is properly attached to the adhesive pads.
- Attach the refrigerator door with a panel by using only the upper 4 screws. Loosen the panel alignment tool’s screw and remove the tool from the refrigerator door by sliding it to the right and off of the door.
Door Panel Alignment
- Align the refrigerator and freezer door panels horizontally by adjusting the 4 screws shown in the figure. Once all adjustments are done lock the screws.
- Align the refrigerator and freezer door panels vertically by adjusting side brackets with the help of a screwdriver within 1 mm. Once all adjustments are done lock the screws.
- NOTE: Do not use an impact driver. Secure screws by hand.
- After proper alignment, fix the remaining brackets.
- Place the screw covers on the all brackets of the refrigerator and freezer doors.
- ©2024 All rights reserved. Used under license in Canada.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>