EARU EAWCBT Smart Circuit Breaker User Manual

EARU EAWCBT Smart Circuit Breaker

Product Information

Specifications

• Compliance: Part 15 of FCC Rules
• Exposure Limits: FCC approved for an uncontrolled environment
• Minimum Distance: 20 cm between radiator and body
• Operating Conditions: Not to be co-located with other antennas or transmitters

Product Usage Instructions

Installation

1. Place the device in a location with a minimum distance of 20 cm between the radiator and your body.
2. Ensure the device is not co-located with any other antenna or transmitter.

Operation

1. Ensure the device is powered on and functioning properly.
2. Avoid placing the device close to your body while in operation.
3. Follow any additional usage instructions provided in the user manual.

Frequently Asked Questions

Q: What should I do if the device is causing interference?

A: If the device is causing interference, try repositioning it to ensure it is not too close to other electronic devices. If the issue persists, contact customer support for further assistance.

Q: Can I use the device in conjunction with another transmitter?

A: No, the device should not be co-located or operated in conjunction with any other antenna or transmitter to comply with FCC regulations and ensure proper functioning.

Product Parameters

Note: Over-current, over-voltage, under-voltage, temperature protection, wattage protection, all these protection functions are off by default

Functions

1. Enery Consumption Monitor
2. Remote Control
   • The user can control the device with his mobile phone App all over the world after the device is connected to WiFi successfully(The mobile phone must get an internet signal).
3. Voice Control
   • Support smart speakers like Amazon Alexa, and Google Home Assistant(After binding the account on Tuya/Smart Life/eWeLink App)
4. Countdown
   • Set the product to open or close after the set time.
5. Professional Timing
   • Timing function: Set the time to turn the switch on or off.
6. Sharing Devices with Family and Friends
7. 0ver-Current Protection
8. Over-Voltage Protection
9. Under-Voltage Protection
10. Temperature Protection
11. Wattage Protection

Wiring and Dimensions

Note: Dimensions are all manually measured, there may be a little error.

Network Settings

Mobile APP Download

Scan the QR code with your mobile phone, or search for Tuya /Smart Life” on the App Store or app market and download.

Indicator

The green power indicator light means power on, red WiFi indicator light fast blinking means entering network pairing mode.

Add Device

Make sure your mobile phone is connected to WiFi (only supports 2.4G WiFi network). Then click the “+” or “add advice” button.

Tuya APP Connection Steps

eWelink App Connection Steps

EAWCBT App Display (Tuya)

EAWCBE App Display (eWelink)

EAWCBT-P App Display (Tuya)

EAWCBT-J APP Display (Tuya)

ZHEJIANG EARU ELECTRONICS., LTD

• Address: GUACHUAN ROAD 228 1ST.LIUSHI TOWN. YUEQING CITY, ZHEJIANG PROVINCE,
• CHINA, 325604 Website: https://shop28909b0b26794.1688.com
• Manager: Bob Wu
• Email:bob@earuelec.com
• Phone Number: +86 15821639630
• WeChat ID :totybest-2
• WeChat QR CODE

FCC Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>