WTE WT-100 Zigbee Thermostat User Manual

WTE WT-100 Zigbee Thermostat

Information

Dear customer,

Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

• www.alza.co.uk/kontakt
• +44 (0)203 514 4411
• Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

Introduction

Welcome

Thank you for your trust and support. By adopting higher-end technology and more perfect technology, you new thermostat will provide you with the right temperature environment every day in the future, making your life more comfortable and your living environment more stylish and beautiful. For detailed instructions on the installation and use of thermostat, please read this manual carefully. Please contact a professional to install the thermostat for you and install and use the product to the extent permitted by law.

Application

An intelligent digital temperature controller is a floor heating system suitable for room temperature control and household temperature control. It controls the operating state of the floor heating equipment by comparing the ambient temperature with the set temperature, which improves comfort and achieves energy saving. This digital temperature controller adopts microcomputer control technology and is equipped with fullscreen display touch buttons, which is elegant in design and easy to use. The thermostat has manual automatic, programmable and state memory functions.

Product packaging

• Thermostat host x 1
• Qualification certificate x 1
• Sensing line (optional) 1 x
• Manual x 1
• Screw x 2

Product Model

• WH Plumbing 3A
• Electric Heating 16A
• BH linkage, gas boiler 3A
• L backlight (you can adjust the brightness or turn off the backlight through the mobile APP)
• R2: Internal sensor and ground external sensor

User Notes

1. Please read this manual carefully. Improper operation may damage the product or cause dangerous conditions.
2. The installation personnel must be well-trained and experienced service technicians.
3. After installation, please read this manual carefully and operate the product according to the instructions.

Caution: Risk of electric shock or equipment damage.

Wiring Diagram

Installation procedure

This product is installed with a standard 86 control (in compliance with European regulations)

1. Connect the power box according to the wiring diagram.
2. Separate the power supply from the control board cable.
3. Screw the power supply in the box of 86.
4. Connect the power board to the control board line, and align the buckle at 30 degrees to complete the installation.

Description of display & Icon

Operating Instruction

1. Power on/off: press to turn on/off the thermostat.
2. Press the M key to switch between manual and automatic modes.
3. In the automatic mode, press or to adjust the temperature to enter the automatic temporary mode. This mode runs for only one session.
4. Press key and M key to enter the clock setting, press M key to switch Settings Item, press and d keys to adjust the value of each parameter. Note: the time of wireless model will be automatically gets Internet time.
5. Press and for 5 seconds to add or cancel the child lock.
6. Link: When the thermostat is on, long press button for 5 seconds and the thermostat display will come out Now the icon flashes, at this time the thermostat into the state of code.

Time programming instructions

Long press the M key to enter the programming setting, short press the M key to switch options, press the or key to adjust the parameter of each option, and press the key to exit and save mode.

Key| Options| Icon| Time| Tima Adjustment| Defaults| Temperature adjustment
---|---|---|---|---|---|---

M

|

Working days

| 1| 06:00|

| 20°C|

2| 08:00| 16°C
3| 11:30| 16°C
4| 12:30| 16°C
5| 17:00| 22°C
6| 22:00| 16°C
Holidays| 1| 08:00| 22°C
2| 23:00| 16°C

Advance options

When POWER OFF, press the M key and the key for 5 seconds to enter the advanced option setting.
Press M to enter the next option, press and to adjust, and press to exit the height Level option.

1

| Temperature compensation| The default value of the calibration room temperature is – 2°C. Press the up and down keys to adjust. The adjustable range is 9.9°C to -9.9°C.
---|---|---

2

| Sensor selection| The temperature sensor is selected as IN by default. Press the up and down keys to adjust as IN respectively, indicating that the internal. ALL means all internal sensors are selected OUT means external sensors are set.
3| Modify the temperature limit| The default temperature limit value is 60°C. Press the up and down keys to adjust the range from 35°C to 60°C.
4| Temperature difference start| The default temperature difference is set to 1°C. Press the up and down keys to adjust the range to 0.5-10 degrees.
5| Antifreeze function| Set the default anti-freeze function to OFF, display OFF, press the up key to turn on anti-freeze and display ON.

6

| Holiday option and turn off weekly programming| 5: Two-day weekend 6: Single day off

7: No rest

OFF: Turn off programming

7

| Primary and secondary reverse selection| Set the default main and auxiliary reversal to 00. Press the up and down keys to adjust 00 main reversal. 01 Inidcates auxiliary reversal.
---|---|---

8

| Backlight brightness| 00: Turn off the backlight 01: Micro-light

02: Medium brightness

03: Backlight highlight

9

| Set upper temperature limit| The default value of the set temperature upper limit is 60°C, and the adjustment range is 15-95°C by pressing the up and down keys.

10

| Restore Factory Defaults| Set to restore the factory default setting to display “-“ Press the up button to adjust the display “—”, press the enter button to restore the factory settings.
11| Sound| ON: Turn on the sound

OFF: Turn off the sound

About wireless connection

Before using the thermostat for the first time, you should set the wireless signal and configuration through your smart phone or tablet to allow communication between your connected devices.
link: When the thermostat is on, long press button for 5 seconds and the thermostat display will come out Now the ****icon flashes, at this time the thermostat into the state of code.

1. Download the APP Search for “Tuya” in App market or scan below QR code to download.
2. Register Account If you don’t have an APP account yet, you can choose to register or log in via SMS verification code. Click “Create a new account”, you will enter the Tuya Smart Platform Privacy Policy page. After you click Agreen, you will officially enter the mobile phone registration page.
   • The system automatically determines the current country/region. You can also select the country/region manually. After entering your mobile phone number or email address, click “get verification code”. Enter the received verification code, then enter the password, and click “finish” to register successfully.
3. Add gateway device
   • Add device Click “add device” or “+” on the top right of the APP homepage to enter the “add device” page.
4. Thermostat add
5. Display of temperature controller APP interface.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

This equipment is in compliance with the essential requirements and other relevant provisions of EU directives.

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>