JX ROBOT L9-LITE 3 Axis Foldable Gimbal User Manual

JX ROBOT L9-LITE 3 Axis Foldable Gimbal

Product Usage Instructions

Installation:
Follow the installation guide provided in the user manual. Ensure the device is placed on a stable surface away from potential sources of interference.

Powering On:
Connect the device to a power source as indicated in the manual. Press the power button to turn on the device.

Operation:
Use the control panel or remote control to navigate through the device’s functions. Refer to the user manual for specific operation details.

Maintenance:
Regularly clean the device using a soft, dry cloth. Avoid using harsh chemicals that may damage the device’s surface.

Frequently Asked Questions (FAQ):

• Q: What should I do if the device causes interference?
  A: If the device causes interference, try repositioning it to minimize interference with other electronic devices.

• Q: How can I troubleshoot the undesired operation of the device?
  A: Check for any nearby sources of interference, ensure proper power supply, and refer to the troubleshooting section of the user manual for further guidance.

About APP

This gimbal support capturing pictures/taking videos by native camera when connect to bluetooth. Any special photography request like Inception, Dolly zoom, Panoramic need be used in APP.

Download the APP

• Way 1:
  iOS smartphone search the “Gimbal pro” on Apple Store; Android smartphone search the “Gimbal pro2” on Play Store;

• Way 2:
  Scan below OR code to download and install.

Tips: The app supports iOS 12.0 and higher or Android 8.0 and higher.

Connect with the smartphone

1. Activate bluetooth on your smartphone;
2. Switch on gimbal;
3. Go to the app and search for available bluetooth devices, select the device named “GP9_XX”, the connection will be established automatically.

App interface overview

1. Video/Photo/Vlog mode
2. Shooting function select
3. Shoot button
4. Front/Rear camera switch
5. Album
6. Bluetooth icon
7. Face/object tracking
8. Gimbal condition display
9. Gimbal power display
10. Flash
11. Phone power display
12. Home page
13. Camera parameters
14. Gimbal mode adjust
15. Settings
16. Gesture control (* only works in iOS system)

Quick Start

This product supports powering on without a smartpone, and allows the phone to be removed even during use when you receive a call.

1. Install the tripod to the gimbal.
2. Insert the smartphone on gimbal according to the direction of the red arrow, remove the smartphone case before inserting, make sure the holder is at the middle of the smartphone.

Power On/Off

Press and hold the power button to power on and off.

Note:
Please make sure that smartphone is firmly attached to prevent vibration or jerking of the gimbal.

Gimbal Overview

Tips: press the shutter button and power button at the same time to reset the bluetooth name, unpair with previous smartphone, then can pair with another smartphone.

Operation Modes

All Follow(AF): The Roll axis is locked, the Pan (left/right) and Tilt (up/down) axes will follow the movement of handle.

Half Follow(HF): Tilt & Roll axes are locked. The Pan axis rotates (left/ right) smoothly with the handle.
Default mode upon powering on

Lock Full(LF): Pan, Tilt, and Roll axes are all locked. The camera remains still and stable, which means the camera cannot follow the movement of the handle.

First person view(FPV): Pan, Tilt, Roll axes follow the movement of the handle.

Others Functions

Work mode
Works with both landscape and portrait modes.

Underslung mode
Hold the gimbal upside down to enter underslung mode, in order to capture images from low position.

Side Grip mode
Rotate gimbal to the right or left by 90° to go from upright to side grip mode, works in both landscape and portrait modes.

Charging

This product supports fast charging, suggest using 5V/2A adapter to charge for the gimbal
Support working during charging

Specification

Caution

1. Ensure the motor rotation is not blocked by an external force during and after the stabilizer is powered on;
2. Please do not contact with seawater or corrosive liquid;
3. Please do not disassemble the stabilizer (except for the detachable accessories in the manual);
4. If the motor works continuously for a long time, the surface temperature of the motor may be too high.
5. It is strictly forbidden to drop or collide with the stabilizer, which may damage it and cause abnormal operation;

Storage and maintenance

1. Please keep this product away from children and pets;
2. It is forbidden to put the product near the heat source (furnace or heater, etc.) and in the car at hot weather;
3. Please store the product in a dry environment;
4. Do not overcharge or discharge the battery, otherwise, the battery cell will be damaged;
5. Do not use the product in the environment with too high or too low temperature;

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the userʼs authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>