Shenzhenshiweituozidianzishangwuyouxiangongsi S105 Car Stereo User Manual

S105 Car Stereo
User Manual

WIRING CONNECTION

BACK OF MAIN UNIT

IMPORTANT NOTICE & PRECAUTIONS

Thank you for using our company multi-media player! To operate the unit correctly, please read the operation manual carefully before using. Keep this operation manual for further reference.
The unit is designed only for DC 12V negative ground operation system. Make sure your vehicle is connected to DC 12V negative ground operation system. Be sure to connect the speaker(-) leads to the speaker(-) terminal. Never connect the left and right channel speaker wires together or to the vehicle body.
The normal temperature for operation is between -20 and +60 degree Celsius. Do not work in extreme high or low temperature and lock vents or radiator panels of the unit, blocking them will cause heat to build up inside the unit and may cause damage or fire.
This unit can play the following media files: 1080p / RMVB / MPEG 4 / MP3 / WMA / JPEG.

INSTALLATION

This is for installations that do NOT require the use of the DIN collar. The radio has threaded holes in the chassis side panels for ISO mount applications. If necessary, qty 8 M5x8mm screws are included with the hardware pack to assist you.

REMOTE HANDSET

to its initial setting by the factory (default stage).
/ POWER| When the unit is turned off, press to turn on the unit.
When the unit is turned on, press & hold shortly to turn off the unit.
M/N / MENU
| Press to shift screen between MAIN MENU & current operation mode.
VOL+ / VOL-| press repeatedly to adjust sound output level.
MUTE /| Press to turn on or off of sound mute control.
IR| Remote control sensor for signal reception from remote handset.
AUX| Insert an external device to this jack in order to have sound output of that external device through the unit.
USB| Insert USB device to this slot for digital files playback.
MICRO SD / SD / MINI SD| Insert micro SD card to this port for digital files playback.
MIC| For voice reception under Bluetooth operation.
TFT SCREEN| It shows the status of operation on the unit. This screen is also a touch display — soft touch the screen for different operations of unit (refer to other parts of this manual for operation details).

ON SCREEN – MAIN MENU OPERATION

During unit operation and when this icon appeared on screen, touch to shift screen to MAIN MENU for selection of various operation or setup modes.
Touch the icon on the desired mode on screen and the unit will then enter into the mode that selected for operation. Hold & slide on screen to shift to other MAIN MENU that shows the hidden input or operation icons.

1. Touch to start radio operation (when the radio antenna connected).
2. Touch to Move selection left.
3. Touch to start mobile phone mirror linking operation (when the mobile phone connected ).
4. Touch to start USB input operation (when an USB device inserted).
5. Touch to start SD card input operation (when a micro SD card inserted).
6. Touch to start Bluetooth operation (when the mobile phone connected)
7. Touch to start auxiliary input operation (when an auxiliary device inserted).
8. Touch to Move selection right.
9. Touch to start viewing front camera (when connected to front camera and pink/black wire).
10. Touch to activate SYSTEM SETUP MENU on screen to have various setup of the unit.
11. Touch to select to desired preset equalization mode.
12. Touch to Make steering wheel control settings.

ON SCREEN-SETUP OPERATION

At MAIN MENU, touch to shift screen to SETTING MENU for various system setup of the unit.
Hold & slide up/down on screen to show the hidden SETTING MENU for various setup of the unit.

1. Touch to shift screen to MAIN MENU.
2. Touch to shift to previous menu or operation mode.
3. Touch to roll the page up and down.
4. Touch to shift to SYSTEM SETUP MENU for various system setting (Refer to SYSTEM SETUP).
5. Touch to activate LANGUAGE INTERFACE to select the desired system language on screen.
6. Touch to shift to AUDIO SETUP MENU for various audio setting (Refer to AUDIO SETUP).
7. Touch to shift to VISUAL SETUP MENU for various visual setting (brightness,contrast, hue, saturation, sharpness)
8. Touch to shift to CALENDAR SETUP MENU for calendar & clock setting (Refer to CALENDAR & CLOCK SETUP).
9. Touch to shift to BLUETOOTH SETUP MENU for various Bluetooth setting (Refer to BLUETOOTH SETUP).
10. Touch to shift to PHONE LINK SETUP MENU for relevant settings.
11. Touch to shift to access other relevant settings
12. Touch to shift to SWC SETUP MENU for steering wheel control setting (Refer to STEERING WHEEL CONTROL SETUP).
13. Touch to enter reset setup. At this mode, touch the arrow to reset the unit at its ex-factory default stage.
14. Touch to shift to VERSION MENU to show details of the unit (Refer to VERSION OF UNIT).
15. Touch to activate the volume control bar on screen, hold & slide to adjust the output level on volume.
16. Touch repeatedly to select brightness of screen or turn off the screen. When the screen is off, touch any portion of the screen to turn it on again

ON SCREEN – RADIO OPERATION

At MAIN MENU, touch to shift screen to RADIO MENU for radio operation.

1. Touch to Select station with FM frequency.

2. Touch to Select station with AM frequency.

3. Touch to Search and save band automatically.

4. Touch to tune the radio frequency to upward or downward station for broadcasting. Touch & hold shortly to activate manual tuning mode. At this mode, touch repeatedly to fine tune radio frequency upward or downward.

5. Touch to select stereo (STEREO) or mono (MONO) mode at FM radio band. When stereo signal received, ST indicator will be highlighted on screen and this is no indicator for mono

6. Touch the desired preset station to start broadcasting.
   Touch & hold shortly the desired preset station can store the current broadcasting station (frequency) into that station.

7. Touch repeatedly to select desired preset equalizat ion mode.

8. Touch to activate the PRESET STATIONS MENU on screen.

9. Touch repeatedly to select brightness of screen or turn off the screen. When the screen is off, touch any portion of the screen to turn it on again

10. Touch to Touch to shift to previous menu or operation mode.

11. Touch to activate the volume control bar on screen, hold & slide to adjust the output level on

12. Touch to shift screen to MAIN MENU.

ON SCREEN – BLUETOOTH OPERATION

LINK UP WITH MOBILE PHONE

To linkup Bluetooth connection with the mobile phone, take your phone and follow the steps: – set the mobile phone to Bluetooth state

• start to search new device
• after searched, new device”CAR-BT”searched out, confirm the search
• in case of need, input default code “0000” or “8888” in the mobile phone
• at the same time, Bluetooth icon on screen will be highlighted
• connection succeeded and you can start using Bluetooth function

At MAIN MENU, touch to shift screen to BT MAIN MENU for Bluetooth operation (when a mobile phone has been linked up with the unit).

1. Touch to shift to BT MAIN MENU for dial out of phone.
2. Touch to shift to BT PHONE BOOK MENU to show the phone book of the connected mobile
3. Touch to shift to BT RECORD MENU to show the record on incoming calls / dial out numbers / missing calls of the connected mobile phone.
4. Touch to shift to BT MUSIC MENU for transmission of music playback from the connected mobile phone.
5. Touch to start Bluetooth operation (when a mobile phone linked up with the unit and this icon high-lighted).
6. Touch to shift screen to MAIN MENU.
7. Touch to shift to previous menu or operation mode.
8. Touch to activate the volume control bar on screen, hold & slide to adjust the output level on
9. Touch repeatedly to select brightness of screen or turn off the screen. When the screen is off, touch any portion of the screen to turn it on again

DISPLAY MIRRORING-ANDROID MIRROR LINK

(for iPhone 6-7-8 series Mirror Link capable telephones)
The special feature of the device is to display the image of a mobile phone which is connected with USB cable and which has Android operational system on the large touchscreen as a secondary display.All applications on your mobile phone are displayed in portrait or landscape format, depending on the position of the phone,and can be controlled from the radio’s touch screen without touching the phone. For example, music, movies,and other content,as well as internet radio,maps, navigation applications,POl databases,or music from the phone’s memory or online.
First,make sure that you have a ” QR Code ” reader application on your phone. If you have not,install a free version from the Google Play app store.
Then select PHONE LINK from the main menu. Two QR codes and some instructions will appear on the screen. Download the AUTOLINK application to install on your phone:

,AMAZON”QR code link: free download directly from the website to the phone:
https://s3-ap- southeast1amazonaws.com/productscenter/release/venus/bootes/common /Autolink.apk 
http://www.autolink.site:8080/jeesitellstatic/apk/Autolink_basic.apk
„GOOGLE”QR code link:free download from Google Play store https : //play. google. com/store/apps/details7id=com. link. autolink As the third option,you can locate and install the AUTOLINK application with the logo above manually from the Google Play store.

• Download a file directly from the website to your phone and install the application independently of the store, such as the„AMAZON”link.

After installing the application,connect the phone with a USB data cable. Instructions on the screen: CONNECT PHONE:

1. OPEN USB DEBUGGING
2. CONNECT USB LINE

SPECIFICATION

GENERAL
Power Requirement:
Load Impedance:
Maximum Power Output:
Tone Control — Bass (at 100 Hz)
Treble (at 10 KHz)| DC 12 Volts, negative ground
4 Ohms
30 watts x 4 (RMS)
+/- 8 dB
+/- 8 dB
---|---
FM RADIO SECTION Frequency range (America)
Frequency range (Europa)
Usable Sensitivity (-20 dB) Signal to Noise Ratio
Stereo Separation (at 1 KHz)
Frequency Response| 87.5 —107.9 MHz
87.5 – 108 MHz
15 dB 60 dB 30 dB 30 Hz — 15 KHz
AM RADIO SECTION
Frequency range (America) Frequency range(Europa) IF frequency| 530-1710kHz 522-1620 kHz 450 MHz
VIDEO SECTION
Video System:
Video Output Level: Horizontal Resolution:| PAL / NTSC
1.0Vp-p 75 Ohms 500
BLUETOOTH SECTION Communication type: Maximum Distance:| V4.0
5 meters
AUDIO SECTION
Maximum Output Level: Frequency Response: Signal to Noise Ratio: Channel Separation:| 2 Vrms (+/-3 dB) 20 Hz to 20 KHz 85 dB
80 dB

Note: Specification and design; functions and features; unit illumination; colour and display segment are subject to change without prior notice. Photos and drawings on gift box or operation manual might be varied from the exact unit. Depends on the input devices, operation might be varied from the operation manual described.

SIMPLE TROUBLE SHOOTING

PROBLEMS, CAUSES & SOLUTIONS
No power
– Check and make sure the connecting wires are connected correctly
– Check whether the fuse is blown. Replace with the proper value fuse if necessary.
No sound
– Check and make sure the speaker wires are connected correctly. No picture
– Check whether the video wire is connected to the video device.
Unit hang-up – Reset the unit to its default stage. No function when pressing the buttons or TFT screen
– Reset the unit to its default stage. Poor effect or unable to receive radio
– Check whether the radio antenna is inserted or properly connected.
– Antenna may not be the proper length. Make sure the antenna is fully extended.
– Antenna may be poorly grounded. Check and make sure the antenna is properly grounded. Stereo cannot be received under radio mode
– Tune the radio frequency accurately.
– The broadcasting signal is too weak, set the mode to MONO.
Remote handset does not work
– Replace new battery of the remote handset.
– Point the remote handset directly at the remote sensor of the main unit.
– Clean the surface of the remote sensor. Bluetooth not operated
– check the devices are linked up correctly.
Note After the above efforts, if the unit still cannot be worked normally, consult your service dealer. Never attempt to disassemble the unit by yourself. No service part inside the unit.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>