Haier CPRD12XC7 Portable Air Conditioner User Manual

Haier CPRD12XC7 Portable Air Conditioner

Product Information

Specifications

• Model: Haier CPRD12XH7Q
• Type: Air Conditioner
• Manufacturer: Haier
• Parts Compatibility: 735 Models

Product Usage Instructions

Installation

1. Choose a suitable location to place the air conditioner ensuring proper ventilation.
2. Securely install the unit following the manufacturer’s installation guidelines.
3. Connect the air conditioner to a power source as per the provided instructions.

Operation
Turn on the air conditioner using the power button on the control panel.

1. Set the desired temperature and fan speed using the remote control or control panel.
2. Adjust the louvers to direct airflow as needed.

Maintenance
Regularly clean or replace the air filters to ensure efficient operation.

1. Check for any leaks or unusual noises and address them promptly.
2. Schedule professional maintenance checks as recommended by the manufacturer.

Frequently Asked Questions (FAQ)

• Q: How often should I clean the air filters?
  

  • A: It is recommended to clean the air filters every 2 weeks for optimal performance.

• Q: Can I use the air conditioner without a remote control?
  

  • A: Yes, you can operate the air conditioner using the control panel on the unit itself.

This Owner’s Manual is provided and hosted by Appliance Factory Parts.

Appliance Factory Parts Experts in BBQ, Humidifier, & Appliance Parts
1-800-955-7075

Haier CPRD12XH7Q Owner’s Manual
Shop genuine replacement parts for Haier CPRD12XH7Q

Find Your Haier Air Conditioner Parts – Select From 735 Models

Manual continues below

PORTABLE AIR CONDITIONER

User Manual
Model# CPRD12XC7, CPRD12XH7

Before operating this air conditioner, please read these instructions completely.

A Word Front, Haier America
Thank you for buying a dependable, energy-saving and easy-to, operate Commercial Cool air conditioner.
This manual contains useful information for you to maintain, operate, install and safely use your air
conditioner. Your air conditioner cleans, cools and dehumidifies the air in your room to provide you with the ultimate level of comfort.
Please read instructions carefully before using the product. Also, do not forget to fill out and mail the Product Registration Card.

Product Registration

Record Your Model and Sarala Number.
Attach the sales receipt to this guide and keep for future reference. Model and serial number can be obtained fr0m the serial label, which is on your air conditioner. For all your service calls during the warranty period the following information will be needed:

• Model Number: ……………………………. , ………… , ……………………………………………………. .
• Serial Number : ……………………………………………………………………………………………….. .
• Dote of Purchase : …….•……………………………………………………………………………………….
• Dealer’s Nome : ………………………………………………………………………………………………. .
• Dealer 1s Address : …………………………………………………………………………………………….. .
• Dealer’s Phone Number: …………………………………………………………………………………….

SAFETY PRECAUTIONS

WARNING: Following these basic precautions will reduce the risk of fire, electrical shock, injurie or death when using your air conditioner.

1. Air conditioner must be connected to proper electrical outlet with the correct electrical supply. (see table previous page)

2. Proper grounding must be ensured to reduce the risk of shock and fire. DO NOT CUT OR REMOVE THE GROUNDING PRONG. If you do not have a three-prong electric receptacle outlet in the wall, hove a certified electrician Install the proper receptacle. The wall receptacle MUST be properly grounded.

3. Do not operate air conditioner if power cord is frayed or otherwise damaged. Also avoid using it if there are cracks or abrasion damage along the length or plug connector or if the unit malfunctions or is damaged in any manner. Contact on authorized service for examination, repairs or adjustments.

4. DO NOT USE AN ADAPTER OR AN EXTENSION CORD.
   Do not block airflow around the air conditioner. The exhaust hose should be free of any obstructions.

5. Always unplug the air conditioner before servicing it or moving it.

6. Do not install or use the air conditioner in any area where the atmosphere contains combustible gases or where the atmosphere is oily or sulphurous. Avoid any chemicals coming in contact with your air conditioner.

7. Do not place any object on the top of the unit

8. Never operate the air conditioner without the filters in place.

9. Do not use the air conditioner near a bathtub, shower or wash basin.

SAVE THESE INSTRUCTIONS

Important Instructions

• Please keep this manual in a safe place.
• Do not use liquid or a spray to clean this product. Use a damp cloth.
• Do not place the product in an insecure or elevated place as it may foll and cause damage or injury.
• Never spill liquid on the control panel; it may cause electrical shock to the electronic parts inside and disable them or cause them to function improperly.
• Never try to dismantle the product by yourself. Unsupervised dismantling and incorrect reassembly of the inside of the back cover may damage the electrical circuit and affect its performance. When maintenance is required, please contact the local service center or local distributor.

Thank you for purchasing our C:omn,erical Cool’ product. Please read this manual carefully before operating and store for future reference Staple your receipt to your manual. You will need it to obtain warranty service.

Model Number
Serial Number
Date of purchase

Advantages of this Model

1. Unique dual-hose design, providing more powerful and faster cooling than the single-hose design.
2. Adjustable airflow direction for convenient and effective cooling.
3. Heat and cool functions for CPRD 12XH7.
4. This model is easy to operate. The electronic control panel has a timer, thermostat, three speed cooling speeds, three fan speeds and one speed dehumidification function (dry).
5. This portable air conditioner does not require water to be added.
6. The unit has a unique design which evaporates the water. Therefore there is no condensation tank and no need to empty a tank 0vernight.
7. An easy-to-install window kit is included which consists of the exhaust hose, 2 hose nozzles, the window panel kit, exhaust hose connector and cover for the exllaust hose connector.
8. Full directional casters are included to help move the unit as needed.
9. The filter screen is designed for easily accessibility of the filter.
10. Portable air conditioners are easy to store when not in 1.,1se.

Parts and Features

1. Control Panel
2. Cold Air Outlet
3. Signal Receptor
4. Transport Handle
5. Air Outlet Hose
6. Evaporator Ai? Intake
7. Air Intake Hose
8. Drain Port
9. Power Supply

• TEST: WHEN THIS BUTTON IS PRESSED OR WHEN THERE IS A CURRENT LEAK, THE INDICATOR LIGHT WILL TURN OFF AND THE UNIT WILL NOT RUN.
• RESET: AFTER SOLVING THE PROBLEM PLEASE PRESS THE BUTTON AND THE UNIT WILL START OPERATING.

Assembly and Installation

Assembly Instruction
A Connect exhaust hose to the back of the unit. Extend hose to desired length and connect with window kit.

USING EXHAUST DUCT SET

1. Insert ends of Exhaust hose into air outlets. nozzle and Exhaust dud “A” by twisting until it stops.

2. Fix the Exhaust dud “A” to the exhaust outlet on the rear of the unit.
   This is achieved by sliding the appropriate. connector downward over the exhaust outlet ensuring that the lugs on the outlet are engaged with the
   grooves on the connector.

3. The exhaust hose is snap-felt to the unit To take it off, turn it clockwise and remove.
   Note: Air outlet hose should be mounted at right side (see fig. 1)

4. Extend the Exhaust hose and close the Window as far as possible, trapping the air outlets nozzle.

B. Repeat same steps for the air intake hose.

USING WINDOW PANEL KIT

1. Air Inlet Hose – l set
2. Air Outlet Hose – 1 set
3. Window Exhaust Adapter – 2 pieces
4. Window/Patio Door Slider Kit-

set Window Kit Installation

Your window kit hos been designed to fit most standard vertical and horizontal window applications.
However, it may be necessary for you to improvise/modify some aspects of the installation procedures for certain type windows. Please refer to for minimum and maximum window openings

Note: Window kit is only available for some models.

Installation lnstrudions

• Air outlet intake indoor side can not be blocked by curtains or anything else.
• The end of air hose cannot be blocked by shutters or anything else.
• Do not bend the air hose when assembling, keep it straight.
• When appliance is in cool or dry mode, condensate will concentrate in water box of chassis. When the box is full, water full indicator lights up (red), The appliance will stop running at the same time. Now the power supply should be shut. Pull out the rubber plug in drain port underside the appliance, and drain the water into a prepared container, or drain the water by moving the appliance to a suitable place.

Note: Water should be drained out when the water full light is on. Otherwise, the appliance will not work.

• Select the best location for the air conditioner. It must be beside a window, door to the outside, or French window.
• Keep the required distance from the return air outlet to the wall or other obstacles at least 20″.
• Fix one end of the air hose on the air intake or outlet under the appliance.
• Extend the air hose to ensure that it is long enough to clear the window, door, French window, or wall hole that you hove chosen as a vent.
• Air outlet or intake cannot be blocked by protective grid or anything else.
• The distance between two ends of the air hose should be at least 8″.

Note: The cooling capacity will decrease when using a single air hose. Fig .. 3

Installation Sequence

Before Starting this Unit

1. Select a suitable location, making sure you have easy access to an electrical outlet.
   Install the flexible exhaust hose and adjustable window slider kit as depicted in Fig. 2 & 3.
   Note
   Step 2 is req1,.1ired only while using cooling or dry mode. In cooling mode you can select to install two hoses or air outlet hose only. In dry mode you may install air outlet hose only.

2. While running or installing the hoses, the unit cannot be blocked by curtains and so on.

3. Plug the appliance into a grounded electrical outlet. Please select an appropriate power supply based on the nameplate sticker found on the unit.
   Note: Do not use a regular extension cord.

4. To tum the appliance on, press ON/OFF button.

Operation

NOTE: Wait for 24 hours to turn on air conditioner if the unit has been tilted for any reason. This is for the oils and the coolants to settle and level off.

1. Wait for 3 minutes before restarting the unit after a normal shut down to complete the compressor cycle.

2. Use a 1 15v 15 amp outlet for the air conditioner. Do not use any other electrical appliances on this line or you may trip the fuse. Use a dedicated line for this air conditioner.

3. Do not place the air conditioner in direct sunlight or dose to any heating appliances. ex. baseboard heaters, stoves, etc.

4. Operate on a flat surface only.

5. Keep the unit free of any obstructers’ such as drapes, curtains, blinds, etc.

6. Keep unit at least 1 foot away from the wall.

7. Check and dean the filter once every week to get the highest efficiency.
   NOTE : Do not use unit without filter.

8. If the unit is not being used for a long period of time remove the plug from the water drain pipe and drain out any condensed water. When turning on the unit first time after plugging it into an electrical outlet the unit will start in a low fan cool mode. The temperature read out on the LED will be the room temperature. When turning on the unit in regular usage it will remember the last shut off setting.

Control Panel

Cooling Mode

Dehumidify Mode

Fan only Mode

Heating Mode Model CPRD12XH7 Only

High Fan Mode

Medium Fan Mode

Low Fan Mode

Display set temperature

Warning light the machine will stop running

Display’ timer setting of auto switch on/off

Power Control
The power control turns the unit on and off.

Warning light
Condensed water may accumalate in the unit. If the internal tank becomes full, the Warning signal in the LCD Display will light the unit

Mode Control
The mode control has 3 settings:

• Cool
• Dehumidifier
• Heating (only

CPRD 12XH7)/Fan
The settings are adjusted with Mode Control button. A green llght will indicate which setting is currently being used.

Cooling Mode
When the cool mode is selected, will show in the LCD Display. During the cooling mode the air is cooled and hot air is exhausted to the outside through the exhaust tube adjust form speed and air temperature to suit your desired comfort level.

Note: The air exhaust hoses must vent outside the room when using cool mode.

Dehumidifier Mode
When humidify mode is selected, will show in the LCD display. Air is dehumidified as it posses through the unit, without being in full cooling mode. If room temperature is higher than T C, fan speed can be adjusted: otherwise fan speed is fixed to “low”.

Note: The warm air exchange hoses must vent inside the room when using Dehumidify Mode, not outside as it does when cooling. If the unit is vented outside some coaling will occur.

fan Mode
When fan mode is selected will be shown in the LCD display, air is circulated throughout the room with no cooling.

Heating Mode (only CPRD 12XH7)
In heating mode the air How is selectable. (Note: Heating is activated only when the ambient temperature is below 77° F.)

Fan Speed Controller
The Fan Speed Control has 3 settings: High, Medium. and low.

Timer
Auto turn off
With machine in running mode, setting timer button for setting timer control. Press” to select number of hours you would like the unit to run before it automatically shuts off.

Auto turn off
With machine in stand by mode, press timer button for setting timer control. Press to select number of hours before the unit automatically starts running in air conditioning mode.

Note: The time is adjustable between 1-24 hours.

Temperature Controls

• Used for adjusting the thermostat
• The default display is room temperature
• In cooling mode, when button is pressed, the set temperature is displayed and may be adjusted. After 15 seconds the display will revert back to room temperature. Temperature is only adjustable in cool mode.
  Note: by pressing both buttons at the same time for more than 3 seoonds, the display will toggle between Celsius and Fahrenheit.

Re111ote Control Operations

Timer
Auto turn off
With machine in fan mode, press timer button to select number of hours you would like the unit to run in air conditioning mode until it automatically shuts off.

Auto turn on
With machine powered off, press timer button to select number of hours until you Would like the unit to automatically start running in a.ir conditioning mode.

Timer / Temperature Buttons

• Used for adjusting the timer and thermostat.

• The-default disp1<;¥ is room temperature ..

• When ” button is pressed, the set temperature is displayed and may be adjusted. After 15 seconds the display will revert back to room temperature.

• The temperature can be raised or lowered in the cool and dehumidifier or dry mode. The temperature cannot be adjusted in the fan mode.

• a) LCD Screen

• b) Power On/Off Button

• c) Timer and Thermostat Setting Buttons

• d) Mode Button (Select A/C, Fan or Dehumidifier)

• e) A/C Fan Speed Button !High, Medium, or Low)  Timer On/Off Button

• g) Fahrenheit/Celsius Selector

TIMER PROGRAMMING

1. Press the button on the remote or the ‘Timer Setting” button on the control panel to turn on the Timer Function.
2. Press the buttons on the remote or the buttons on the control panel to set the desired shut-off time.
3. The unit will shut off when the set time elapses.

DEHUMIDIFICATION OPERATION
Press the button on the remote or the 11MODE” button on the control panel to selects the dehumidifier mode. When the dehumidifier mode is on, the temperature buttons and the fan speed buttons do not function and the fan will operate on low speed. An image on the LCD display will indicate that the unit is dehumidifying, Remember, the exhaust hose does not need to be used in dehumidifier mode.

Air Conditioner Remote Control
The functions work the some as your air conditioner’s touch controls.
Batteries: Remove the cover on the bock of the remote control and insert the batteries with the (+) and (·) poles pointing in the proper direction.

CAUTION

• Use only AAA or IEC R03 1 .5V batteries.
• Remove the batteries if the remote control is not used for a month or longer. Do not attempt to recharge the supplied batteries.
• All batteries should be replaced at the some time.
• Do not dispose of the batteries in a fire as they may explode.

Product Specification

Care and Cleaning Guide

• Always unplug your air conditioner before cleaning.

• Air filter needs to be cleaned of least once o week for your unit to operate at optimum efficiency. Slide out the filter from the book by pulling on the tab. The filter may be washed or vacuumed. Remove the excess water from the filter by gentry shaking the filter. This will remove- dust and particles trapped in the filter. After cleaning, reinstall the filter. DO NOT use your air conditioner without the air filter in place.

• To clean the cabinet, DO NOT use harsh chemicals, abrasives, ammonia, chlorine, bleach, concentrated detergents, solvents or metal scouring pads. Some of these
  chemicals may dissolve, damage and/ or discolor your air conditioner.

• Always use a soft cloth dampened with water or a mild soap and water solution to wipe the front of the cabinet. Wipe dry with o soft cloth.

Storage
To store your air conditioner when not being used for a long period of time, drain condensed water using the drain pipe. Remove exhaust hose, dean the filters, cover with plastic bog and store away.

Troubleshooting

If air conditioner does not operate

• Check if unit is plugged in. The plug may have come loose.
• Check if the electrical wall receptacle is of proper voltage.
• Check if the circuits breaker needs to be reset or if the fuse needs to be replaced.
• Check if the unit is in “Off” mode.
• If the tank full warning light is on, Coll for service.

Air conditioner working but room not cooling

• Room may have appliances that produce heat. Use an exhaust fan to remove excess heat.
• Check exhaust hose for proper installation.
• Redirect the airflow. Remove any obstacles.
• All doors and windows need to be closed so that cool air does not escape the room.
• Air filter may be blocked or may need cleaning.
• Unit BTU may be too low for the required cooling area.
• On extremely hot & humid days, air conditioners may take a little longer to cool.
• Drain the water drain pipe by removing the plug.
• Unit may be in fan or dry mode. Put air conditioner in cool mode.

Limited Warranty

This wa1TGnty covers all defects in workmanship or materials for

1. mechanical and electrical parts (including labor costs) contained in this product, for a period of 12 months from the date of purchase (commercial or rental application, the warranty is 90 days).
2. The sealed system and compressor contained in this product is for a period of 7 years from the date of purchase (excluding labor costs after the initial 12 month period). In commercial or rental use, the additional limited compressor warranty is for 1 year and 9 months (excluding labor costs after the initial 90 days period),
   You must keep and be able to provide your original sales receipt as proof of the date of purchase.

Who is covered?
The original retail purchaser of this product.

What will be done?
Haier Arteria will repair or replace, in your home, any mechanical or electrical part or the compressor which proves defective in normal household use for a period of 12 months. Haier America
will repair or replace (excluding labor costs) the sealed system and compressor (parts only) for on additional 6 year period.

How can you get service?

1. Contact your nearest Haier America authorized  Service Depot. For the name of the Service Depot nearest you, contact Heier A111erico at 877-337-3639.
2. All service must be performed, by an authorized Haier America Service Depot.

THIS WARRANTY COVERS UNITS WITHIN THE CONTINENTAL UN11’ED STATES, CANADA AND PUERTO RICO AND DOES NOT COVER

• Damages from improper installation.
• Damages in shipping.
• Damages from misuse, abuse, accident, alteration; lack of proper care and maintenance.
• Damages from service, by other than on authorized dealer or service center.
• Labor, service, transportation and shipping charges for the removal of defective ports and installation of a replacement port beyond the initial 12 month period.

THIS LIMITED WARRANTY IS GIVEN IN LIEU OF All OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
The remedy provided in this warranty is exclusive and is granted in lieu of all other remedies.
This warranty does not cover incidental or consequential damages. Some states do not allow the exclusion of incidental or c0nsequential damages, so this limitation may not apply to you. Some states do not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you. This warranty gives you specific legal rights, and you may also hove other rights, which vary from state to state.

IMPORTANT
Do Not Return This Product To The Store
If you have a problem with this product1 please contact the “Haier America Customer Satisfaction Center” at 1-877-337-3639.
DATED PROOF OF PURCHASE, MODEL # AND SERIAL # REQUIRED FOR WARRANTY SERVICE
No. DE MODELO Y No. DE SERIE

• Made in China
• Haier America
• New York, NY 1001 8
• Printed in China
• Part: AC-9999-<J0
• Issue: August 2007

References

• Repair Your Grill: Shop Replacement Parts for 24,880 Models
• Haier Air Conditioner Parts - Select From 735 Models

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>