Dougao S10 Bone Conduction Wireless Headphones Instruction Manual
- July 4, 2024
- Dougao
Table of Contents
S10 Bone Conduction Wireless Headphones
“`html
Product Specifications
- Model: S10
- Bluetooth: LEDBluetooth
- Charging Voltage: DC5V +/-0.25V
- Output Current: 100mA-500mA
- Battery: Built-in non-removable rechargeable battery
Product Usage Instructions
Charging Instructions
1. When the headset is charging with the 5V charging cradle, the
headset is turned off and cannot be turned on.
2. The percentage [100%] while charging indicates that the
charged amount is full.
Charger and Battery Information
Before using any charger, ensure that the charger specifications
match the requirements to prevent damage to the Bluetooth
headset.
Only use approved chargers to avoid violating warranty terms and
causing danger.
When charging the battery, connect the charger or computer
through the 3C certification to charge it.
Battery Charging Guidelines
The headset uses a built-in non-removable rechargeable battery.
Avoid trying to remove the battery to prevent damage.
If the headset shows 10% or less battery, charge it immediately
to avoid automatic shutdown.
Plug the charger into an AC power outlet to charge the
headset.
Key Function Overview
- On/Off Button/Play Pause
- Previous Song/Volume Button –
- Next Song/Volume Button +
- Battery Level Display
- Mode Display Microphone
- Charge Port/Data Download
Frequently Asked Questions (FAQ)
Q: How do I know when the battery is fully charged?
A: When charging, the percentage [100%] on the display indicates
that the charged amount is full.
Q: Can I use any charger to charge the headset?
A: Only use approved chargers with the recommended
specifications to avoid damaging the Bluetooth headset.
“`
S10
/
/”-”
/”+”
/
: ,,2,:;
: ,,3,:
B T : ,LEDBluetooth,, S10(Bluetooth),,
: ,, ,:;
:
/ : ,/; ,/:
// : ,2;, ;
: ,”+”,:
: ,”-“,;
: ,”+”2;
: ,”-“2;
: (,)3,3 ;(:siri, android” “iossiri);
MP3 1,/MP3, ; 2,””,MP3,MP3 mode/ ,; 3MP3,””,,/; 4MP3MP3/WVAV;
: 1 5V,,, 2[100%] ,( :DC5V+/-0.25V,100mA-500mA), , ,.,3C ,
1.10,, , 2.
5.4
FCC FCC 15 (1) (2) FCC 15 B — — — — /
S10
TF card function:
1Power on any state, double-click the power on button to switch to bluetooth
mode/MP3 mode, after hearing the beep, it means the switch is successful.
2Bluetooth playback, double-click the “power on” button, go to MP3 mode
playback, display MP3 mode screen flashes/music mode tone, said switching
successfully; 3MP3 mode playback, double-click the “power on” button, go to
MP3 mode playback, display MP3 mode screen flashes/music mode tone, said
switching successfully. 3, MP3 mode playback, double-click the “power on”
button, go to bluetooth playback, accompanied by / bluetooth mode tone. 4The
headset MP3 function only supports MP3/WVAV format music.
Charging:
1When the headset is charging with the 5V charging cradle, the headset is
turned off and can not be turned on, and the last digit of the percentage of
the display is flashing.
2When charging, the percentage [100%] means the charged amount is full.
Charger and battery
Charger and battery
Before using any charger to charge the headset, please check whether the
charger specifications are in line with the requirements (recommended charger
output voltage: DC5V +/-0.25V, output current: 100mA-500mA), charging voltage
is too high may damage the Bluetooth headset.
Warning: Only use approved chargers with this package, use of other chargers
may violate the terms of approval and warranty of the device and may result in
danger. If the factory is shipped with a charging cable, you need to connect
the charger or computer through the 3C certification to charge it. Prohibit
serious collision with this product, serious impact may damage the electronic
motherboard and battery.
Charging the battery
The headset uses built-in non-removable rechargeable battery, please do not
try to remove the battery from the headset, so as not to damage the headset o
long-term non-use headset, please store it to a dry and ventilated place, and
every two months to charge it.
1. When the headset connected to show 10% or less, and hear the low battery
tone of low battery please charge, that the headset power is insufficient. If
you continue to use it will automatically shut down, then you need to charge.
2. Plug the charger into the AC power outlet.
5.4
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. NOTE: This equipment
has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: — Reorient or relocate the receiving antenna. — Increase
the separation between the equipment and receiver. — Connect the equipment
into an outlet on a circuit different from that to which the receiver is
connected. — Consult the dealer or an experienced radio/TV technician for
help. The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
S10
Key Function Overview
On/Off Button/Play Pause
Previous Song/Volume Button “-”
Next Song/Volume Button “+”
Battery level display
Mode Display microphone
Charge Port/Data Download
Release both ears, rest assured that freedom, listening to music at the same
time can also listen to the outside world; listening to music, phone calls,
play games, three-dimensional
sound, true quality sound, clear shock; is your office, go out, driving the
best choice!
instruction manual S10
Bone Conduction Wireless Headphones
Healthy-Comfortable-Release Both Ears
Description of controls
Power On: The headset is in the off state, long press the on/off button, hold
it for 2 seconds, beep: power on.
Shutdown: The headset is in the on state, long press the on/off button, hold
itfor 3 seconds, beep: power off
Connect BT: Power on the device and enter the pairing status, the LED display
Bluetooth blinks, cell phone, desktop computer, laptop device searches for S10
(Bluetooth) , manually click on the connection, the
Pairing Successful: Power on state, the headset automatically enter the
Bluetooth search pairing mode, the first time to open the Bluetooth need to be
manually clicked to connect, the headset beep: Bluetooth is connected.
Disconnect Bluetooth: Unsolicited Bluetooth Disconnect in Cell Phone Bluetooth
Settings
Pause/Play: Under the Bluetooth connection status, click the power on button
to play/pause. Under the music playing status, click the power on button to
play/pause.
Answer/hang up/rejectUnder incoming call status, long press the on button for
2 seconds to reject; under call status, click the on button to hang up.
Volume up: In music and call mode, click the “+” button to increase the volume
by one bar.
Volume Down: In music mode, press and hold the “-” button for 2 seconds to
play the previous song.
Next song: In music mode, press and hold the “+” button for 2 seconds to play
the next song.
Previous song: In music mode, press and hold the “-” button for 2 seconds to
play the previous song.
Voice assistant: (after connecting bluetooth, not make a call) continuously
press 3 on button to enter voice mode, then 3 on button to exit; (Note: switch
siri, android need to open the “bluetooth headset button start” in the voice
assistant, ios need to turn off the background to open the siri function);.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>