KINDIARY 1-SP03NA02 Bubble Machine Instruction Manual

Bubble Machine

Instruction Manual

Introduction

Thank you for purchasing KINDIARY Bubble Machine. This instruction manual contains important information about safety, usage, and disposal. Use the product as described and keep this manual for future reference. If you sell. this bubble machine or pass it on, also give this manual to the new owner.

Safety Instructions

• This product is only authorized for domestic use and not for commercial or industrial purposes. It is only intended for applications described in these instructions.
• Children or dependents should not use, clean, or perform maintenance on the bubble machine without adult supervision.
• Only connect the bubble machine to a power outlet type as indicated in the
• Specifications” section of this manual.
• To completely disconnect from power, please remove the batteries.
• The machine should not be exposed to dripping or splashing water. If moisture, water, or any liquid gets inside the housing, immediately remove the batteries and contact a qualified technician to check and repair it
• Do not open the housing of the bubble machine. There are no user-serviceable parts.
• Never leave the machine unattended when it is switched on.
• Never aim the bubble machine at open flames.
• Do not aim the bubble machine directly at people as bubble liquid may leave permanent markings on clothing.
• Do not transport with liquid. If the machine gets wet, do not use until it is completely dry.
• Always keep batteries out of the reach of infants and young children to prevent the batteries from being swallowed. If swallowed, take immediate action and contact medical authorities for help.
  ATTENTION! NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OLD: & CONTAINS SMALL PARTS WHICH MAY REPRESENT A CHOKING HAZARD! DANGER OF SUFFUCATION!
  ATTENTION! Cords, wires, polystyrene parts, foil, tape, clips, tags, and loops, which have been used to secure the bubble machine in its packaging for transport, are not part of the bubble machine and must be removed before children are allowed to play with the bubble machine.

Product Description

1. Liquid Level Display
2. Bubble Fluid Tank
3. Magnetic Bubble Blowing Wand
4. ON/OFF Switch
5. Carrying Grip
6. Battery Compartment
7. PUSH Button: Remove Bubble Fluid Tank
8. Magnetic Blowing Wand Knob

Included Items

1 x Bubble Machine
1 x 10-Hole Magnetic Blowing Wand
1 x 6-Hole Magnetic Blowing Wand
1 x Instruction Manual
Before using the bubble machine, check the package contents to ensure all parts are free of visible damage.

Removing and Inserting the Batteries m

• Loosen the battery compartment screw using a screwdriver.
• Remove the battery compartment cover and insert the new batteries.
• Ensure correct polarity. This is shown in the battery compartment.
• Screw on the battery compartment back on.
  ATTENTION! Only use the device with the battery compartment cover screwed on.

Choose the Suitable Magnetic Bubble Blowing Wand

The bubble machine comes with 2 interchangeable magnetic bubble blowing wands to satisfy the needs of users in a variety of situations and environments.

• 6-hole magnetic blowing wand: produces a lesser amount of bubbles and uses less bubble liquid.
• 10-hole magnetic blowing wand: produces a larger amount of bubbles and uses more bubble liquid.
• If you feel bubble liquid is being consumed too quickly using the 10 hole magnetic blowing wand and want the bubble liquid to last longer, please switch to using the 6 hole magnetic blowing wand.
  Note: The amount, size, color, and other states of the bubbles can depend greatly on the composition and quality of the bubble liquid being used
  Please choose the most suitable magnetic bubble blowing wand based on your needs.

Attach the Included Magnetic Bubble Blowing Wands

1. Remove the bubble fluid tank
   Simultaneously press the PUSH button on the bottom of the bubble machine and pull the bubble fluid tank downward to remove it (Figure 1).

2. Grip the blowing wand knob and magnetically attach one of the included magnetic bubble blowing wands to the bubble machine (Figure 2).

3. Reattach the tank by pushing it until place until you hear a click.

Operating Instructions

1. Place the bubble machine on a flat solid surface and in a well-ventilated area.
2. Push the bubble fluid tank upwards until you hear a click to reattach it.
3. Press the ON/OFF switch on the top to start/stop the bubble machine.

Note:

• Keep the air intake ports free from blockage.
• Do not use outdoors in the rain as this may lead to a short circuit.
• Do not leave unused liquid in the bubble fluid tank for an extended period. The liquid may thicken in the tank. Remove all liquid before storing or moving.
• The bubble machine is best operated at 40°:90°F (4°-32°C). Performance of the machine may be reduced in low temperatures.

CLEANING

1. Remove the bubble fluid tank and empty all bubble liquid in it.
2. Remove the magnetic bubble blowing wand.
3. Clean the bubble fluid tank and magnetic bubble blowing wand using water.
4. Dry the bubble fluid tank and magnetic bubble blowing wand and reattach them.
5. Clean the other parts of the bubble machine with a soft cleaning cloth.

Note:

1. It is recommended to clean the bubble machine after each use.
2. If cleaning using compressed air, do not spin the magnetic bubble blowing wands to avoid damage.
3. Don’t rinse the entire bubble machine with water except the bubble fluid tank and magnetic bubble blowing wands. Wipe the other parts of the bubble machine with a soft cleaning cloth.

Storage

• If you do not plan to use the bubble machine in the near future, it is best to remove the batteries.
• It is recommended to empty the bubble fluid tank and clean and store the bubble  machine in adry, dust-free place.

Specifications

Rated Power: 5.5W
Batteries: 6 x AA batteries
Size: 240(L)x170(W)x185(H)mm/9.45×6.69×7.28in
Weight: 0.82kg/1.81lbs
Max Tank Capacity: 120ml/4.10z
**** This product’s packaging is made from environmentally friendly material and can be disposed of at your local recycling plant.

CE Declaration of Conformity

We, Thyone Products Inc, confirm that the appliance as detailed below does comply with all essential requirements of the EMC directive 2014/30/EU and governing EU- regulations as mentioned below.
Article Description: Bubble Machine
Brand Name: KINDIARY:
Model Number: 1-SPO3EU02, LT-177
Applicable Standard(s):
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3 ****

Ray Tang
Department Manager

UKCA Declaration of Conformity
We, Thyone Products Inc, confirm that the appliance as detailed below does comply with all essential requirements of the relevant UK. legislation for UKCA-marking and governing UK-regulations as mentioned below.
Article Description: Bubble Machine
Brand Name: KINDIARY:
Model Number: 1-SPO3EU02, LT-177
Applicable Standard(s):
BS EN 55014-1
BS EN 55014-2
BS EN 61000-3-2
BS EN 61000-3-3 ****

Ray Tang
Department Manager

Customer Service

Service Clients

UNITED STATES| Phone: +1 909-391-3888 (Mon-Fri 9:00am – 5:00pm PST o (Mon-Fr9:00am -5:00pm PST)
Email: ushelp@1byonebros.com 
---|---
CANADA| Email: cahelp@1byonebros.com 
UNITED KINGDOM| Phone: +44 158 241 2681 (Mon-Fri 9:00am – 6:00pm UTC)
Email: ukhelp@1byonebros.com 
GERMANY/FRANCE ITALY/SPAIN| Email: euhelp@1byonebros.com

BRAND OWNER
1byone Products Inc.
1230 E Belmont Street, Ontario, CA, USA 91761
Customer Service: +1,909-391-3888
www.1byonebros.com

EUROPEAN REPRESENTATIVE

APEX CE SPECIALISTS LIMITED
Ec REP Unit 3d North Point House, North Point Business Park,
New Mallow Road, Cork, T23 AT2P, Ireland
BRITISH REPRESENTATIVE
APEX CE SPECIALISTS LIMITED
89 Princess Street, Manchester, M1 4HT, UK

1byone Products Inc.
1230 E Belmont Street, Ontario, CA, USA 91761
Customer Service: +1909-391-3888
www.1byonebros.com
Made in China

Documents / Resources

| KINDIARY 1-SP03NA02 Bubble Machine [pdf] Instruction Manual
1-SP03NA02, 1-SP03NA02 Bubble Machine, Bubble Machine, Machine
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>