The Home Depot 1701031 Teel Mounting Bracket Kit User Manual
- July 4, 2024
- THE HOME DEPOT
Table of Contents
Use and Care Manual
1701031 Teel Mounting Bracket Kit
Installation: First, secure the steel mounting bracket to the desired installation location. Then, insert the stainless steel flagpole into the mounting bracket, ensuring the pole is sturdy and does not wobble. Attach the decorative ball to the top of the pole, and secure the 3×5 ft American flag to the pole using the two plastic tangle-free rotating rings.
Usage: Adjust the position of the rotating rings to ensure the flag does not wrap around the pole while flying.
Cleaning: Regularly clean the flagpole and flag to remove dust and dirt. Use a soft cloth and water to gently wipe, avoiding the use of chemical cleaners.
Inspection: Regularly check the stability of the flagpole installation, ensuring that the screws and mounting bracket are tight. If you notice any wobbling or loosening of the pole, immediately stop using it and re-tighten the mounting bracket and screws.
Storage: When not in use, dismantle the flagpole and store it properly. Avoid exposing the pole to extreme weather conditions to prevent damage. When storing, fold the flag neatly to avoid prolonged pressure on the folds, which may cause deformation or wrinkles.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>