hager JFD406U Enclosed Fuse Combination Switch Installation Guide

July 3, 2024
hager

JFD406U Enclosed Fuse Combination Switch
Installation Guide

JFD406U Enclosed Fuse Combination Switch

Enclosed fuse combination switch

IP41 Dimensions [mm] Cable Capacity[1] [mm2]
2 Phases 3 Phases 4 Phases
JFB202x JFB302x JFB402x
JFB203x JFB303x JFB403x
JFD206x JFD306x JFD406x
JFE210x JFE310x JFE410x
JFG316x JFG416x 500
JFG320x JFG420x 500
JFG325x JFG425x 500
JFH331x JFH431x 650
JFH340x JFH440x 650
JFI363x JF1463x 800
JFI380x JFI480x 800

Reference Extension box| Height [mm]| Width [mm]| Depth [mm]| Suitable for
---|---|---|---|---
JZA701| 200| 375| 200| JFG316xx, JFG416xx
JFG320xx, JFG420xx
JFG325xx, JFG425xx
JZA702| 250| 500| 300| JFH331xx, JFH431xx
JFH340xx, JFH440xx
JZA703| 300| 600| 350| JF1363xx, JF1463xx
JF1380xx, JF1480xx

Safety instructions

Installation, modification and disassembly of the product may onlybe carried out by an authorised electrician in accordance with the relevant installation standards and safety regulations of the country.
The final installation must fulfil all the requirements of the latest Edition of EN IEC 60947-3.
These instruction is an integral part of the product and must be kept for the entire lifetime of the product.
Read these instructions carefully before starting any work and before using the product.
Mounting
The installation location must be selected so that the load-bearing capacity of wall is suitable for the weight of the enclosure including all to built-in devices/ materials.
All cables must be routed via screwable cable entries on the enclosure or otherwise sealed.
All enclosures are suitable for restricted areas in accordance with EN IEC 60947-3.

Installation

Danger
Electric shock when live parts are touched!
An electric shock can lead to death!

  • Isolate all connection cables before working on the device and cover any live parts in the area!

Mechanical brackets and electrical connections can come loose during transport with installed devices. In this case, the electrician must ensure that all connections are firmly tightened before the system is put into operation.

  • After completing the installation, clean the enclosure and remove filings, material residues and other foreign objects.

Technical data

Characteristics

Utilization category| AC-23A for  20 A ≤ I  ≤ 400 A
AC-23B for 400 A < I  ≤ 800 A
---|---

Current carrying capability

Ie [A] 20, 32, 63, 100, 160, 200, 250, 315, 400, 630, 800 A
Ithe [A] 20, 32, 63, 100, 160, 200, 250, 315, 400, 630, 800 A

Voltage ratings

Ue 415 V
Ui   800 V for  20 A ≤ I  ≤ 400 A

1000 V for 400 A < Ie  ≤ 800 A
Uimp [kV]|  8 kV for  20 A ≤ Ie  ≤ 400 A
12 kV for 400 A < I ≤ 800 A
Rated frequency fn [Hz]| 50/60 Hz

Installation environment

Location type Indoor
IP IP41
IK IK05
pollution degree 3

Installation method

Mounting type Surface Mounted
Gland plate Removable
construction type Fixed
stationary / movable Stationary only
Electrical connections F (Fixed)

Device configuration

Fuse type gG fuse (if included)

Enclosure configuration

Enclosure body type Robust Steel 1.5 mm CR4 SPCC
Enclosure paint type Powder coat Grey white RAL 9002
cable entry cable entry point in endplate

Handle information

Handle IP IP55
Padlock lockable in position OFF

hager.com 
2024-06

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals