HEWN Stoneform Flooring Installation Guide
- July 3, 2024
- HEWN
Table of Contents
Stoneform® Installation Guide
Congratulations on your purchase of Stoneform® from Hewn! We are thrilled to be a part of your flooring journey, and we want to ensure that your installation process is seamless and enjoyable. Before you embark on this exciting project, please take a moment to read through the following detailed instructions.
What is Stoneform®?
Stoneform® is a next-generation composite core flooring, comprised of nearly
70% limestone and 30% virgin PVC.
Stoneform® is a sustainable and durable choice for flooring, providing all the
benefits of natural wood and stone flooring without the upkeep and hassle.
The wear layer is the top surface of Stoneform® that helps prevent scratches,
dents, and wear and tear from reaching the core of the flooring. Our wear
layer is comprised of ceramic beads infused with acrylic lacquer to make it
even more durable than other floors.
Engineered to mimic the intricate patterns found in genuine wood, this print
layer ensures a level of realism that stands unmatched in the industry.
Each individual plank within the Stoneform® collection boasts a distinct and
authentic grain pattern, enhancing the natural look and feel of the flooring.
What sets Stoneform® apart from conventional options is its innovative
utilization of True Grain technology, offering a flooring experience that
provides twice as many unique prints. Going beyond mere aesthetics, our
commitment to excellence is evident in the print layer’s quality, showcasing
durability and longevity.
At the core of this revolutionary flooring is a proprietary stone composite,
meticulously engineered to emulate the strength and resilience of natural
stone. This composition ensures that every plank not only replicates the
authentic textures found in wood but also stands resilient against the rigors
of daily life.
Beneath it all, we use a 1.5MM IXPE underlayment, made of cutting-edge
Irradiated Crosslinked Polyethylene, the newest advance in foam technology.
IXPE is a closedcell foam that is 100% waterproof, impervious to mildew, mold,
rot, and bacteria.
IXPE is an excellent insulator and has an outstanding IIC sound absorption
rating of 60.
This all helps Stoneform® feel warm underfoot and dampen sound.
-
CERAMIC BEAD INFUSED WEAR LAYER
30 mils of UV cured urethane with an added level of aluminum oxide to make it more scratch and dent resistant. -
DESIGN CURATED PRINT FILM
2x unique plank designs with our True Grain Technology, for fewer repeated patterns and a more natural wood look. -
PROPRIETARY STONE COMPOSITE CORE
Stoneform* is a composite flooring made of nearly 70 percent limestone which makes it ultra-stable and durable. -
IXPE SOUND ABSORPTION PADDING
1.5 mm acoustical pad offers enhanced sound reduction and a more cushioned feel.
Ensure Warranty Coverage
Must Follow Manufacturer’s Installation Guidelines
- Use transitions at exterior doors and thresholds: Stoneform® is a floating floor and needs room to expand and contract from season to season. No less than 1/4″ expansion room.
- Your floor must be flat: Any area that has flooring deflection more than 3/16″ in any 8′ span will cause the locking system to fail.
- Your flooring must be acclimated: Stoneform® should be acclimated onsite for at least 48 hours in a climate controlled environment where it is to be installed within recommended temperature and humidity requirements.
- Do not install cabinets on top of Stoneform®: Stoneform® must be allowed to float, expand, and contract throughout the seasons. A minimum of a 1/4″ must be allowed where Stoneform® meets all immoveable vertical surfaces.
- Use a moisture barrier: If installing Stoneform® over concrete, a 6mils moisture barrier is required. Hydrostatic pressure from potential moisture in the subfloor will cause the locking system of Stoneform® to fail.
- Do not install Stoneform® over hardwood: Moisture from the subfloor can be trapped in the hardwood and result in dangerous mold.
- Don’t glue Stoneform® on anything besides stair treads and transition pieces.
Tools Required
Pro Tip: Although Stoneform® can be installed using a score and snap method, the installation can be easier and faster with a saw and basic equipment. Our favorite tools are provided below.
- Miter Saw & Table Saw
- Jigsaw
- Oscillating Multi-Tool
- Tape Measure & T Square
- Universal Tapping Block
- Rubber Mallet
- Straight Edge & 1/4” Spacers
- Moisture/Vapor Barrier (6 mils in thickness)
- Knee pads
- Small pry bar
- 72”-96″ level
- Chalk line or laser level
- LVP cutter
- Large pry bar
- Pull bar
- Razor Blade
- Sharpie or pencil
- Protective Eye Goggles
Guidelines
We recommend adhering to the following professional advice. In the event that you may not have the opportunity to review the comprehensive instructions or view the accompanying videos, we suggest, at the very least, watching the installation video accessible via the following link: https://www.youtube.com/watch?v=mL6YVmF908I&t=1396s
General Install Instructions
Stoneform® should be exclusively installed indoors and never outdoors. Prior
to installation, meticulously inspect all planks. If any defects are
identified, please refrain from installation and promptly reach out to Hewn
for assistance.
Here are some crucial guidelines:
- Acclimate the Stoneform® for 48 hours prior to installation at a climate between 65°F and 80°F. It is important that the area being installed is at this temperature range indefinitely.
- Remove quarter round, baseboard molding, or cove base.
- Undercut doorway moldings to match the flooring thickness.
- Lay cartons flat to prevent damage to the click mechanism.
- For larger spaces exceeding 100 linear ft, use T-moldings to ensure stability.
- Open 2-3 boxes at a time during installation to mix planks for color uniformity.
- Leave a ¼” expansion gap between Stoneform® and the walls around the perimeter of the room.
- Ensure the subfloor is flat to within 3/16” over 10 ft.
General Install Instructions
Stoneform® should be exclusively installed indoors and never outdoors.
Prior to installation, meticulously inspect all planks. If any defects are
identified, please refrain from installation and promptly reach out to Hewn
for assistance.
Pre-installation Preparation:
It is mandatory to use a vapor barrier
with Stoneform® when installing directly over a concrete slab. Use a vapor
barrier with a minimum thickness of 6mils. This barrier acts as a protective
layer, preventing moisture from seeping up and causing damage to your new
flooring. Although waterproof, Stoneform® is not a moisture barrier, so it’s
crucial to address any moisture issues in the subfloor before installation. A
moisture barrier is not required if installing over tile or a wood subfloor.
Pro Tip: If your home has a crawl space, most of the time the moisture barrier
is underneath the house to prevent moisture rising into your subfloor. If your
crawl space does not have an existing moisture barrier, please install the
moisture barrier in the crawl space before installation.
General Install Instructions
Stoneform® should be exclusively installed indoors and never outdoors. Prior
to installation, meticulously inspect all planks. If any defects are
identified, please refrain from installation and promptly reach out to Hewn
for assistance.
Subfloor Requirements:
Pro Tip: Most problems with flooring installations are a result of poorly
prepared subfloors. Unlevel or rough subfloors will create problems that will
transfer to the floor. Prior to the installation of any flooring, verify that
the subfloor meets the requirements listed in these instructions. Hewn is not
responsible for flooring failure resulting from unsatisfactory job site and/or
subfloor conditions.
Please follow the specific prep instructions for your subfloor.
Concrete: Stoneform® may be installed over on-grade, above-grade, or
belowgrade concrete subfloors.
Ensure moisture emissions do not exceed 5.0 lbs per 1000 sq. ft. for 24 hours
and maintain a relative humidity below 85%.
Other requirements include:
- Hard, dense, and free from powder or flaking.
- New concrete slabs must be dry (at least 60 days) and fully cured.
- Fill holes, grooves, and expansion joints with Portland cement.
- Concrete floors with radiant heating systems are acceptable.
- Must have 1/4″ expansion gap around all fixed, vertical surfaces.
Wood Subfloor: Stoneform® can be installed over sound wood underlayments.
Follow the manufacturer’s recommendations for underlayment fastening and
ensure the wood subfloor is flat, dry, and sound.
Existing Subfloor: Stoneform® can be installed over various finished
floors, including single-layer resilient sheet flooring, tile, ceramic,
marble, and terrazzo.
The surface must be in good condition with no signs of excessive moisture. Do
not install over heavily cushioned floors or carpets.
Electric Heating Mats: Avoid using electric heating mats not embedded
into the subfloor. This will void the warranty.
Radiant Heated Systems: Stoneform® is compatible with in-floor radiant
heating systems, provided the subfloor temperature stays below 85°F. Gradually
increase the temperature to desired settings.
General Install Instructions
Stoneform® should be exclusively installed indoors and never outdoors. Prior
to installation, meticulously inspect all planks. If any defects are
identified, please refrain from installation and promptly reach out to Hewn
for assistance.
Preparation Before Installing:
Pro Tip: Dry lay the floor before clicking planks together to finalize
color layout and spot any installation pattern mistakes. The installer is
responsible for setting expectations with the end-user.
Step 1: Commence installation from left to right, inserting spacers at
ends and edges. Do not install cabinets or fixed objects on top of Stoneform®.
Proper expansion space is essential, and door jambs should be undercut.
Step 2: Start installing with the tongue side against a wall (insert
picture) and work your way down one row at a time. Lock the short end of the
plank by inserting the tongue into the groove at an angle. Drop in place and
continue to the end of the row.
Step 3: Use the leftover plank from the first row as a starter for the
second row.
Maintain at least 8” between plank end joints on adjacent rows. Plank joints
should be randomized with a goal to not have joints line up with neighboring
rows.
Step 4: Lock the long edge of the plank by inserting the tongue into the
groove at an angle. Slide the plank toward the end of the previously installed
plank until the tongue touches the groove. The flooring will sit flat on the
floor when it is completely clicked together.
Example:https://www.instagram.com/reel/CclZtyJJGFO/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==
Step 5: Angle-Angle installation does not require the use a rubber mallet
and tapping block. However, they can be used to ensure the planks are
completely locked together. Any gapping can compromise the locking system. If
the planks aren’t completely clicked together, separation can occur as time
goes on.
Finishing the Installation:
- Remove spacers from the perimeter.
- Install transition moldings without fastening through the flooring.
- Pre-drill and install quarter round or baseboard molding, fastening into the wall.
- Use 3M Scotch-Blue™ 2080 Tape when adhering paper to the floor.
- Move furniture using an appliance hand truck over hardboard runways.
- Utilize felt protectors on furniture.
General Install Instructions
Stoneform® should be exclusively installed indoors and never outdoors. Prior
to installation, meticulously inspect all planks. If any defects are
identified, please refrain from installation and promptly reach out to Hewn
for assistance.
Special Installations:
Bathrooms: Stoneform® is 100% waterproof and ideal for bathrooms. Use
100% silicone caulking at ends, especially around bathtubs, toilets, or sinks.
Stairs: Install Stoneform® on stairs using Hewn provided stair nosings.
Use 100% silicone construction adhesive on stairs to prevent movement. Glue
will ONLY be used when installing on stairs and for transition pieces. Not at
any other time during the installation should you use glue.
https://www.youtube.com/watch?v=2rkFnsTztog&t=6s
![HEWN Stoneform Flooring
- Figure 5](https://manuals.plus/wp-content/uploads/2024/07/HEWN-Stoneform- Flooring-Figure-5.jpg)
General Install Instructions
Stoneform® should be exclusively installed indoors and never outdoors. Prior
to installation, meticulously inspect all planks. If any defects are
identified, please refrain from installation and promptly reach out to Hewn
for assistance.
Maintenance:
Pro Tip: Stoneform® should be regularly cleaned and maintained. Use a damp
microfiber mop
or rag to clean Stoneform®. If a cleaner is used, we recommend Bona Hard
Surface Floor Cleaner.
- Regularly sweep and vacuum your floors to keep them dust-free.
- When moving heavy furniture, use Masonite panels for protection.
- Use felt protectors on furniture to reduce indentation.
- Be cautious with rolling casters to prevent floor damage.
- Place walk-off mats at entrances to minimize dirt.
- Do not wax the flooring or use “mop and shine” products.
- Absolutely no steam mopping.
- Stoneform® is highly scratch-resistant but not scratch-proof. All furniture that comes in direct contact with Stoneform® should have felt sliders between the furniture legs and the flooring. Care should be taken not to slide furniture across Stoneform®.
In Case of Flooding:
Pro Tip: Stoneform® is waterproof. Remove water promptly using a water
pump, fans, and a dehumidifier. Ensure the room’s moisture levels return to
normal without drying below the previous level. If necessary, uninstall and
reinstall the floor.
We hope these comprehensive instructions enhance your Stoneform® installation
experience.
For any queries or concerns, reach out to Hewn’s dedicated support team at
801-803-9878 or
customerservice@hewnfloor.com.
Happy installing!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>