Sound PEATS Runfree Lite2 Open Ear Headphones Instruction Manual
- July 3, 2024
- Sound PEATS
Table of Contents
Sound PEATS Runfree Lite2 Open Ear Headphones Instruction Manual
Pairing
-
Press and hold the power button for 3 seconds to turn on the headphones.
Subsequently, the Indicator light on the headphones will flash alternately between red and white lights. At this point. the headphones enter the pairing mode. -
Turn on your device’s Bluetooth and select “SOUNDPEATS Run Free ute2” from the Bluetooth list to complete the pairing.
Dual Device Connectivity
Please follow the Instructions on the cord Inside the package to download the
official PeatsAudlo opp.
Afterwards, open the app, locate, and enable the “Dual Device Connectivity·
option.
The steps for dual device connectivity ore as follows:
- Pair the headphones with Device A. Once paired successfully, turn off the Bluetooth on Device A.
- Repeat the pairing process to successfully connect the headphones to Device Band maintaining the connection status.
- Finally, open the Bluetooth on Device A and connect to the headphones. Now you con use the dual connectivity feature.
*Once the dual connection Is established, the paired devices will automatically reconnect.
Reset
- Plug the charging cable Into the charging port to put the headphones Into charging mode.
- While the headphones are charging, press and hold the power button for 3 seconds until the Indicator lights flash red and when alternately twice.
- Finally, unplug the charging cable and turn on the headphones. The reset process Is complete.
Wearing Methods
Identify the left and right headphones. Adjust the earphones to fit your ears.
Product Diagram
Controls
Q&A
Q1 . How to charge the charging case?
- Connect the charging case to a Type-C charger. (The current does not exceed IA).
- If the earphones stay Idle for an extended period, charge them at least every three months to prevent the battery from being damaged.
Q2. How to check the charging status?
- The indicator light stays red during charging.
- The indicator light stays white when fully charged.
Q3. How to disconnect the headphones from the phone?
Method 1: Simultaneously press and hold the volume “+” and “-” buttons for 3
seconds. (This method doesn’t work during music playback or calls.)
Method 2: Turning off the Bluetooth on the phone will disconnect the
connection.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>