FYSIQ FW-ONE Walking Pad Desk Treadmill User Manual

**FYSIQ FW-ONE Walking Pad Desk Treadmill User Manual

**

Please read all instructions carefully before using this machine and please retain this user manual for future reference. If you have any inquiries or require further assistance during the assembly or using, please contact FYSIQ Customer Support:

Method 1: Go to Order Page to contact seller via Amazon

Method 2: Reach us via Email: fysiq_support@163.com

Warm Tips: FYSIQ support team replies emails within 24 hours, if you don’t get the reply beyond 24 hours, the replies may be wrongly allocated by the email system, please kindly check the spam box or resend your email, so we can realize that you don’t get the replies then try another way to contact you.

PRODUCT INTRODUCTION

Packing List

Parts List

Assembly Steps

Open the packaging box, get the assembly materials out of the box, and lay the treadmill flat on the ground;

1. Connect the power cord

2. Turn on the power switch

3. Operate the remote control to get the machine working.

OPERATING INSTRUCTIONS

Overview
The monitor console of this machine has white display and remote control function.

Parameters

Remote Control Button Description

• Start Pause
• Stop
• Speed+
• Speed-
• Mode

Key function and operation description

• Start/Pause – Start/Pause the Machine
  Operating instructions:

1. In manual mode, press this button, the machine will start;
2. Press this button when running, the machine will pause and monitor will retain
   data. Press the button again, machine will continue to run, continue to accumulate the previous data, and run at lowest speed to keep safe.

• Stop – Stop the Machine

Operating instructions:
When the machine is running, press this button to stop the machine.

• Mode – Countdown Mode

Operating instructions:

1. In manual mode, press this button to enter in countdown mode;
2. Press this button when standby to enter different countdown mode in order: Time – Distance – Calories

• Speed+ – Adjust Speed Value while Running; Adjust Value when # Set Target Countdown.

Operating instructions:

1. When the machine is running, press this button to increase speed, once 0.1mph or 0.1km/h.
2. When set time/ distance/ calories countdown, press this button to increase target value.

• Speed- – Adjust Speed Value while Running; Adjust Value when Set Target Countdown.

Operating instructions:

1. When the machine is running, press this button to decrease speed, once
   0.1 mph or 0.1km/h.

2. When set time/ distance/ calories countdown, press this button to decrease target value.

Running Mode

A. Manual Mode
How to enter Manual Mode: After power on, press Start button to run the machine in manual mode.

Operating instructions:

• Start speed is 0.6mph or 1km/h, the time, distance, and calorie windows will count positive from 0;
• Press the Speed+ and Speed- button to adjust the running speed:
• If the machine runs over 100 minutes, it will automatically turn off.

B. Countdown Mode

1. How to enter Time Countdown Mode: After power on/ in manual mode, press Mode button to enter TIME countdown mode. Here, the time window displays 30:00 minutes and flashes. The time target can be set ranging from 8:00 to 99:00 minutes by pressing “+” or “-” buttons. Then Press the Start button to run the time countdown.
   Operating instructions:

   • Start speed is 0.6 m ph or 1km/h, time window will countdown from the set time target, distance and calorie windows will count positive from 0;
   • Press the Speed+ and Speed- button to adjust the running speed; « When the time window go to 0, the machine will stop slowly.

2. How to enter Distance Countdown Mode : After power on/ in manual mode, press Mode button to enter DISTANCE countdown mode. Here, the distance window displays 1.0 mile or 1 km and flashes. The distance target can be set ranging from 1.0 to 99.0 miles by pressing “+” or “” buttons. Then Press the Start button to run the distance countdown.
   Operating instructions:

   • Start speed is 0.6mph or 1km/h, distance window will countdown from the set
     distance target, time and calorie windows will count positive from 0;

   • Press the Speed+ and Speed- button to adjust the running speed;

   • When the distance window go to 0, the machine will stop slowly.

3. How to enter Calories Countdown Mode: After power on/ in manual mode, press
   Mode button to enter CALORIES countdown mode. Here, the calories window
   displays 50 cal and flashes. The calories target can be set ranging from 20 to 990 cal
   by pressing “+” or “-” buttons. Then Press the Start button to run the calories countdown.

Operating instructions:

• Start speed is 0.6mph or 1km/h, calories window will countdown from the set calories target, time and distance windows will count positive from 0;
• Press the Speed+ and Speed- button to adjust the running speed;
• When the calories window go to 0, the machine will stop slowly.

Hibernation Function

• Except for the stopping by pressing the Pause button, when the treadmill stops running, and there is no operation for more than 10 minutes, it enters in system hibernation. The monitor console will automatically turn off and clears data.
• Then press any button to wake up, then the monitor console will turn on and in initial standby mode.

Auto Stop Function

• When the machine running and no one using it, it will automatically stop after 1 minute and clear the data.

Switchable UOM

• In the shutdown state, press the buttons “+”, *-” and “Stop” in order and cycle twice, the unit of measure can be switched between metric system and the British system.

Bluetooth & APP Function

• Scan this QR code to access the instructions of How to connect APP [a] ¥ [m] When the treadmill is on standby/powered on, if want to control the :i speed through the APP or don’t find the controller, please download the APP FITSHOW “; after connected, the treadmill can be controlled & through the FITSHOW ”
  

SAFETY INSTRUCTIONS

Grounding specification

This machine must be grounded!
If the product experiences abnormalities or malfunctions, grounding can greatly reduce the risk of electric shock. The original plug of this product is installed with a grounding conductor. To ensure safety, the plug must be inserted into the corresponding grounding power socket.

DANGER! – Failure to follow the instructions may result in electrical leakage. If you are unsure whether the product is properly grounded, please consult a profes- sional electrician for confirmation. If the plug of this product does not match the power socket at home, please consult a professional electrician and be sure not to disassemble the original plug of this product at will. Please refer to the product grounding map below.

MAINTENANCE GUIDELINES

Caution: Before cleaning or maintaining the machine, be sure to unplug the power plug of the machine.

1. How to Clean
   Comprehensive cleaning will extend the lifespan of the walking machine.
   Regularly remove dust to maintain component cleanliness. Be sure to clean the exposed parts on both sides of the running belt, as this will reduce the accumulation of impurities under the running belt. Ensure that sports shoes are clean and avoid carrying foreign objects to the running belt to wear the running board and belt. The surface of the running belt must be wiped with a damp cloth soaked in soap. Please be careful not to splash water onto electrical components or under the running belt.
   Caution!!! Before moving the motor protective cover, be sure to unplug the power plug of the machine. Make sure open the motor protective cover and vacuum clean the motor at least once a year.

2. How to Lubricate the Running Belt
   The running board and running belt of this machine have been pre-coated with lubricating oil.
   The friction between the running belt and the running board has a significant impact on the service life and performance of electric treadmills, so it is necessary to regularly apply lubricating oil. We also suggest conducting regular inspections of the board surface. If the board is damaged, please contact FYSIQ customer support team. We suggest that you purchase lubricants from the local exercise equipment acces- sory store or directly contact our company. Suggestions of applying lubricating oil according to the following table: (Usage shown in the diagram below). User| Usage Frequency of Machine| Frequency of Lubricate Oil
   ---|---|---
   User 1| 3 hours per week| every 6 months
   User 2| 3-5 hours per week| every 3 months
   User 3| > 5 hours per week| every 2 months

3. How to Adjust the Tightness of the Running Belt
   The running belt has been adjusted before leaving the factory. After unpacking and installation, please check the operation of the running belt first. After a period of use, if the user experiences a pause or slipping while running, please adjust the running belt adjustment bolts at both left and right side at the same time, clockwise in half a turn each time. Fine tune to normal run without the above phenomenon.

4. How to Center the Running Belt

5. Place the machine on a flat surface.

6. Run the machine at speed 3.5KM/H (2.2 MPH).

7. If the running belt leans to the right, rotate the right adjusting bolt clockwise by 1/4 turn and pause for 30 seconds, | then the running belt automatically 3 returns to normal. If it does not return to . normal, please repeat the above method T for adjustment.

8. If the running belt leans to the left, rotate the left adjusting bolt clockwise by 1/4 turn and pause for 30 seconds, then the running belt automatically returns to normal. If it does not return to normal, at L please repeat the above method for adjustment.

ERRORS AND SOLUTIONS

E 01: Indicates abnormal communication between console and controller

Possibilities & Solutions| The cables are not properly connected, broken, or have poor contact| Please reconnect the cables
---|---|---
The monitor console has no signal output| Replace the monitor console
The controller has no signal output| Replace the controller

E 0 2: Indicates abnormal voltage measurement between controller and motor

Possibilities Solutions| Properly connected motor cable| Check if cable is well
---|---|---
No/Abnormal voltage output from controller| Replace the controller
Poor motor| Replace the motor

EO03: Indicates abnormal speed detected by the controller

EO04: Indicates controller detected motor overvoltage protection

Possibilities Solutions| The machine load exceeds the rated working voltage of the motor| |Itis recommended to run within the rated voltage range of the motor
---|---|---
Abnormal motor| Replace the controller
Motor over-voltage detection circuit of the controller failure| Replace the motor

EO05: Indicates that the controller detected motor over-current protection

Possibilities Solutions

| The machine load exceeds the rated working current of the motor| It is recommended to run within the rated current range of the motor
---|---|---
Assembly structure problem causes motor resistance or blockage| Check if the structure of the machine is normal
Controller current limiting system malfunction| Replace the controller

E06: Indicates that the controller detected power supply abnormal low voltage

Possibilities Solutions

|

The power supply voltage is too low

|

Check if the power supply is normal

---|---|---

Controller board detects circuit failure

|

Replace the controller

E07: Indicates that the safety key is not properly placed

Possibilities Solutions

| The safety key has fallen off| Place the safety key to proper position
---|---|---
The safety lock system of monitor console has malfunctioned| Replace the monitor console

FYSIQ strives to provide the best experience to our valuable customers, if any inquiries or require further assistance, please contact the FYSIQ Customer Support Team:
Email : fysiq_support@163.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>