FitRx HH-9322 ActiveTrack Health Plus Fitness Trackers User Guide

June 28, 2024
FitRx

FitRx HH-9322 ActiveTrack Health Plus Fitness Trackers

Introduction

Keep track of all your important health data while you’re on the go with the Fit Rx” Active Track Bracelets! These mini Bluetooth-enabled devices easily keep track of your steps, heart rate, blood pressure, and more throughout the day,  and even measure your sleep and workout data. Featuring Bluetooth compatibility, quick pairing to most Android or iOS smartphones, and a lightweight, water-resistant design, the Fit Rx” Active Track Bracelets are your new everyday companions!

What’s Included

  • 2x Active Track Bracelets
  • 2x USB Chargers
  • User Guide

Warning:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Features

  • Track your workout data, heart rate, blood pressure, steps, and more.
  • Quick and easy pairing to your smartphone.
  • Water-resistant design with a bright LEO display.
  • Support for Android 4.2/iOS 8.0 and above.
  • lightweight and adjustable band for comfortable all-day wear.

Charging the Active Track Bracelets

  1. Slide the Active Track into the USB charger. Be sure to line up the charging nodes to the prongs on the USB charger, with the LEO display facing up.
  2. Plug the USB charger into a USB power source.

Note: The Active Track should fully charge in approximately 2-3 hours.

Pairing an Active Track Bracelet to Your Smartphone

  1. Download the “HryFine” app from the Apple App Store or the Google Play Store, or scan the OR code above.

  2. Tap and hold the Active Track’s Power Button to turn it ON.
    Make sure your phone has its Bluetooth function enabled.

  3. Open the “HryFine” app on your phone. Click the watch icon in the upper right corner of the homepage, or go to the Bluetooth settings page on your device to search for the Active Track.
    Search and select “Fit Rx” to connect to the Active Track.

  4. A “Bluetooth Request Pairing” message will appear on the app. Select “Pair” and you will see a “Device Connected” message.

Note: When an Active Track is successfully connected, the date and time of the device are automatically synchronized.

Using the Active Track Bracelets

  1. Firmly insert the Active Track display into the watch band and adjust it to your desired fit.
  2. Tap and hold down on the Power Button to switch the dial theme.
  3. Tap the Power Button to cycle through the different functions.
  4. Tap and hold the Power Button to select a mode.
  5. To turn the Active Track OFF, cycle through the modes and tap and hold “more”. Tap the Power Button until you see a . Tap and hold the Power Button to shut the Active Track off.

List of Modes:

Home: Displays the time, date, battery level, and weather.
State: Counts your steps, distance walked, and calories burned throughout the day. Automatically clears the data at 00:00; you can view the step data history in the app.
RPM: Shows heart rate and blood oxygen levels.
Sports: Shows a timer and calorie count for different exercise routines. Automatically clears the data at 00:00.
Message: Gives reminders and running interval times.
Sleep: Tracks sleep rhythm.
Weather: Shows local weather in Fahrenheit and Celsius.
Music: Controls your music directly from the Active Track.

More:

A. Camera: Controls your camera directly from the Active Track.
B. Looking For: Locates a misplaced Active Track while connected to Bluetooth.
C. Theme: Cycles through the different home screen themes.
0. Reset: Factory Reset.
E. OR Code: Scans the OR code to download the fitness app.
F. : Tap and hold the Power Button to turn the Active Track OFF.

Slide Effect : Choose from different slide effects to cycle through the Active Track’s modes.

Cleaning 6 Maintenance

  • To clean an Active Track or charger, gently wipe it with a soft, damp cloth.

Important Safeguards

  • Keep this product away from flammable objects.

  • Keep the Active Track Bracelets out of the reach of children.
    This product is not a toy.

  • Do not store this product near heat sources or in direct sunlight.

  • Always ensure that all parts have been properly assembled to prevent electrical short circuits.

  • Do not use the charging clips if they appear damaged or are malfunctioning in any way.

  • If this product malfunctions, do not try to repair it yourself.
    Take it to a qualified technician instead.

Specifications

  • Input: 5V/O.OBA

  • Battery: 50mAh

  • Charging Time: 2-3 hours

  • Working Time: Up to 72 hours

  • Waterproof Level: IP65

  • Size: 10.2 x 0.75 x 0.43 in.
    (260 x 19 x 11mm)

  • Weight: 0.04 lbs. 119.4g)

For more innovation, visitmyfitrx.com

Fit Rx'” Active Track Bracelets. Distributed by Fit Rx'”, NY, NY 10016. ©Copyright 2023 Fit Rx'”. All Rights Reserved. Made in China. All other trademarks and trade names are the property of their respective owners. All pictures shown are for illustration purposes only. Actual product may vary due to product enhancement. Subject to change without prior notice.

Customer Support

If you have any questions about using the Fit Rx Active Track
Bracelets, we are here to help. Call or email us, and an
experienced customer service representative will be happy to
assist you: [email protected] or 1-855-G0-UUMI.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

FitRx User Manuals

Related Manuals