HUANXIN CP01 Car Display Motherboard Instructions
- June 28, 2024
- HUANXIN
Table of Contents
HUANXIN CP01 Car Display Motherboard
Product Information
Specifications
- Product Type: Car Display Motherboard
- Supported Modes: Bluetooth, WiFi
- Compliance: FCC
- Operating Distance: Minimum 20cm between the radiator & body
Product Usage Instructions
Installation
- Ensure the car display motherboard is compatible with your vehicle’s system.
- Locate the existing display unit in your car and power off the vehicle.
- Carefully disconnect any cables connected to the old display unit.
- Install the new car display motherboard in the same location and reconnect the cables securely.
- Power on the vehicle to test the functionality of the new display.
Bluetooth Mode
To use the product in Bluetooth mode:
- Access the settings menu on your car display.
- Enable Bluetooth functionality on the motherboard.
- Pair your mobile device with the car display by following the on-screen instructions.
- You can now stream audio or make hands-free calls through the car display system.
WiFi Mode
To use the product in WiFi mode:
- Access the network settings on your car display.
- Enable WiFi mode on the motherboard and connect to your desired network.
- You can now access online services, streaming platforms, and other connected features through the car display.
Frequently Asked Questions
Q: What should I do if the Bluetooth/WiFi connection is unstable?
A: Try resetting the Bluetooth/WiFi settings on both your mobile device and the car display motherboard. Ensure that there are no interferences causing signal disruptions.
Q: Is it safe to operate the product close to my body?
A: The product complies with FCC radiation exposure limits. Maintain a minimum distance of 20cm between the radiator of the motherboard and your body to ensure safe operation.
User Manual
The product is a car display motherboard that supports Bluetooth and WiFi
modes
CP01-Vehicle mounted instrument specifications
FCC
FCC Caution.
Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (I) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modification warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>