Pookin MT-862 Foldable LED Table Lamp User Manual
- June 3, 2024
- Pookin
Table of Contents
Pookin MT-862 Foldable LED Table Lamp
User Manual
- LAMP ON/OFF
- STEPS COLOR TEMPERATURE
- 30MIN/6OMIN TIMER
- 6 STEPS BRIGHTNESS SLIDER
- WIRELESS CHARGING AREA
- USB OUTPUT PORT
- POWER CONNECTION PORT
- POWER ADAPTER
Thank you very much for purchasing our products.
Please read the manual carefully before use!
Specification
| Part No. | MT-862 |
|---|---|
| Light Source | 72pcs 2835 SMD LED |
| CCT | 2800K/3400K/4500K/5600K/6500K |
| Input | DC 12V/2A |
| Lamp Power | 10W |
| Wireless Charging Power | 10W |
| USB Output | 5V/1A |
| Brightness | 400Im± 10% |
| CRI | Ra>80 |
| Material | ABS+ Aluminum |
| Housing Color | Silver+ white; Black |
| Switch | Touching |
| Weight | 1150g |
| Packing List | Lamp; Adapter with Cable; Manual; |
*Due to the continuous improvement of products, such as the technical parameters in this manual are modified without prior notice.
User Manual
Connect the adapter with the lamp to the power before use.
- Touch the key to turn on/off the lamp.
- Touch key to adjust the color temperature, there are 5 steps color temperature adjustable.
- Touch the M key for 30min/60min timer.
- Touch the brightness slider to adjust brightness, there are 6 steps brightness.
- USB output port can offer the power to other devices.
- Wireless charging function can charge the devices with wireless function, such as mobile phones.
Attention
- Do not self-disassemble the product in case any electric shock happened.
- Please make sure to connect the power correctly in order to maintain normal working.
- Please do not over-adjusting the joint parts of the lamp to avoid any damage.
- Please make sure the lamp to be placed in steady place.
- Please do not use the lamp in the high-temperature or high-humidity environment.
- Please do not look at the LED light source straightly to avoid your eyes hurt.
- Please stop using the product once you find any problems.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 15cm and 20cm distance between the radiator and your body: Use only the supplied antenna.