MRC GRUDGE-XS Grudge Open Face Helmet User Guide

: June 23, 2024
: MRC

Table of Contents

MRC GRUDGE-XS Grudge Open Face Helmet
INTRODUCTION

MRC GRUDGE-XS Grudge Open Face Helmet

MRC GRUDGE-XS Grudge Open Face Helmet User Guide

FOR YOUR SAFETY, PLEASE READ THIS MANUAL BEFORE WEARING YOUR HELMET.

INTRODUCTION

You have just purchased an MRC Grudge helmet. It was designed and made to bring you maximum riding pleasure while offering efficient protection, all in style. Thank you for making this choice, and we hope that it will be your faithful partner for a long while and provide you with complete satisfaction.

For your comfort and safety, Midnight Rally Club uses the best technology and combines it with top-quality materials. Still, be sure to ride carefully on the road, because a helmet can never guarantee total safety.

WARNING

No helmet can protect the user against all impacts, predictable or unpredictable.

To maximize the protection offered by this item, the helmet should be perfectly fit to your size and body type, and the chin strap must be solidly attached and fastened.

DIRECTIONS FOR USE

Please ensure that you are using a helmet that fits: it should be tight enough on your head so that it doesn’t move, but not so much that it hurts.

To put on your helmet, hold it by the chin strap’s sides, then move them apart so that you can slide your head in, from front to back.

For your protection, this helmet has been designed so that, in case of violent impact, part of the energy will be absorbed by the materials it’s made of.

After this kind of impact, the helmet’s structure may be damaged and no longer offer you optimum protection. Simple visual observation does not always suffice to verify that the integrity of the helmet has not been compromised by the impact. It is therefore preferable to change it.

CHIN STRAP INSTRUCTIONS

Attaching the chin strap:
1- Pass the strap through the two □ -rings
2- Pass the strap over the first ring and under the second, then tighten the chin section so that you can only pass a single finger between the strap and your neck.

Opening the chin strap:
Simply pull on the red tab.

MAINTENANCE AND CLEANING

A helmet is a protective device designed to be deformed, to fold, even to break to absorb the energy generated by an impact. Your MRC Grudge helmet should be treated and handled carefully so that it maintains its protective and energy-absorbing qualities for the duration of its lifespan, especially for the day when a crash may occur. By taking care of it every day, you’ll ensure your protection over many years.

Follow these simple rules:

Never decorate the helmet with paint, stickers, labels, or adhesive tape.
Only use gentle soap and water to clean the exterior of the helmet.
The chemical compounds used in many cleaning products may damage the integrity of the helmet’s external shell.
The type of damage created by unsuitable products is often invisible and can cause premature cracks in the shell, making it fragile.
Only use gentle soap and water to clean the inside of the helmet.
Never leave the helmet in contact with gasoline or any other petroleum-based product, because this can irreversibly damage the internal padding designed to absorb energy and/or the external shell of the helmet.

ACCESSORIES

In the box that contains your helmet, you’ll find the following accessories:

Reflective stickers: as part of your signaling day or night, the law requires you to place these reflective elements on your helmet – on the front, on the back, on the right side, and on the left.

WARRANTY

If, during the twelve-month warranty period, and despite all the care we’ve taken to produce it, your helmet shows visible defects in terms of materials or manufacture, please contact your vendor right away, or return it to us, with the original invoice, for processing by our After-Sales Service department. Our contact information is available on the website:
www.midnightrallyclub.com

This warranty does not apply for defects other than those related to materials or manufacture.

The warranty does not cover the following situations:

If the product has been modified by the purchaser or a third party
If damage is not a result of manufacturing defects

Any dispute between the parties related to this warranty will be adjudicated by the relevant court in Rennes (France).

CERTIFICATION

Your helmet has been certified by qualified organizations for the relevant regions,
EGE 22-05 for Europe, DOT (Federal Motor Vehicle Safety Standard 218) in the U.S., and JIS in Japan.