SMXC045 Cassette Tower CPU User Manual
- June 22, 2024
- SMX
Table of Contents
SMXC045 Cassette
User manual
SMXC045 Cassette Tower CPU
1.1 Safety Information.
- Avoid direct contact of the device with water and other liquids.
- Do not use the appliance in an environment with high humidity.
- Keep the device out of the reach of children. They may swallow some elements.
- Use the appliance only in accordance with the user manual.
- If the device stops working properly – contact us.
1.2 Package contents.
- Case
- Manual
- Mounting kit
Included Accessories.
| Item | Name | Use | |
|---|---|---|---|
| (1)Screw M3 5mm x13 | Motheíboaíd/SSD | ||
| (2)Screw 6-32 6mm x5 | PCIE Power Supply/Expansion Caíds | ||
| (3)Screw 6-32 6.5mm x2 | Motherboard mounting pin | ||
| (4)Screw 6-32 5mm x4 | HDD 3.5″ | ||
| Cable ties | Cable management | ||
| Spare plastic latch | For Glass Panel | ||
| Rubber washer | To the graphics card bracket |
How to use the product.
1.5 Panel I/O.
REMARK! Before connecting the wires, refer to the motherboard manual.
1.6 Disassembling the panels.
Glass panel: Bend the panel at a 15° angle, then lift them up.
Side Panel: Using the toolless screws (A), unscrew the panel, then slide the
panel.
Front panel: Grasp the panel from underneath (B), then pull it towards you
with a firm motion.
1.7 Assembling the Power Supply.
Using the screws (2), screw the power supply to the chassis. Make sure the
power supply is facing the fan down the case.
1.8 Assembling the Motherboard.
Remark! Before mounting, please refer to the motherboard manual.
The case supports motherboard standards: ITX, mATX, E-ATX and ATX.
To mount the motherboard, use the screws (1). Adjust the mounting pins (3) to
the size of your motherboard.
1.9 Fan Installation and Connection.
Three 140mm fans are pre-installed on the front of the case. You can swap
them out for three 120mm fans. To remove the front fans, remove the front
panel.
One 140mm fan is mounted on the back of the case.
You can install two 120mm/140mm fans on the top of the case.
1.10 Removing the dust filters.
At the top of the case and at the bottom you will find dust filters. The
filters are mounted on magnetic strips. Gently prying them open will allow
them to be dismantled.
Remark! The front dust filter is integrated into the panel. It is not possible
to disassemble the filter yourself.
1.11 Mounting SSDs.
Disassemble the side panel of the case. The disk frame is mounted on the
bottom of the case with tool-free screws. Unscrew the bezel, and then screw
the disc to the bezel. Use the screws marked with the number 1.
1.12 Mounting HDDs.
Unscrew the disk frame. Then use the screws (4) to secure the HDD. You can
install a maximum of two HDDs in the frame.
1.13 Mounting the Graphics Card.
Unscrew the rear panel grilles (A). Next, remove the caps of the PCIe
expansion cards. Use the screws (2) to mount the graphics card.
You can use the factory graphics card bracket. Using screws, adjust the
mounting height of the bracket. Pay close attention to ensure that the bracket
does not interfere with the graphics card fan.
Remark! Remove as many PCIe port covers as your graphics card requires.
1.14 Installation of All in One water cooling recommended.
You can install an All in One water cooling system in the case. We
recommend the installation of radiators of the following sizes:
Front: 240 / 280 / 360 mm. Top: 240 / 280 / 360 mm.
Remark! Before installing the water cooler, please refer to the enclosed
instructions. When mounting the water cooler on the front of the case, make
sure that the cooler will not interfere with the graphics card bracket.
Specification.
| Side panel | Tempered Glass |
|---|---|
| Backlight | None |
| Motherboard Standard | Mini-ITX |
Micro-ATX
ATX
E-ATX
Internal Drive Spaces| 1x 3.5”, 1x 2.5”
Expansion card slots| 7
Maksymalna długość kaíty gíaficznej| 340 mm
Maximum CPU Cooler Height| 185 mm
Maximum number of fans| 6
Fan mounting options| Front: 3x 120 mm, 3x 140 mm ľop: 2x 120 mm, 2x 140 mm
Rear: 1x 120 mm, 1x 140 mm
Wateí Cooling Mounting Options| Top: 240mm, 280mm
Front: 240mm, 280mm, 360mm
Number of Fans Installed| 4
Buttons| Power
Reset
Connector Leads| 2x USB 3.0 socket
Audio jack
Colour| Black
Height| 436 mm
Width| 230 mm
Depth| 360 mm
Scales| 5,5 kg
Warranty & Support
Your product comes with a 24-month manufacturer’s warranty. For more
information, visit the
www.silvermonkey.com/support website.
If you would like support on how to use the product, please contact us at
kontakt@silvermonkey.com.
Producer:
Silver Monkey sp. z o.o.
Twarda 18 00-105 Warsaw Poland
v. 1/27.05.2024
Environmental & Compliance
As the manufacturer of this equipment, we declare that it meets the
requirements of the relevant European Union directives. If you need a copy of
the declaration of conformity – please contact us.
Do not dispose of this equipment with other waste. The materials from which
the equipment is made can have a bad impact on the environment and human
health if the product is disposed of improperly. Hand over used equipment to
an appropriate e-waste
collection point.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>