PHILIPS BGP291 LED51-4S LumiStreet gen2 Micro LED Light Owner’s Manual
- June 22, 2024
- Philips
Table of Contents
PHILIPS BGP291 LED51-4S LumiStreet gen2 Micro LED Light
Product Information
Specifications
- Product: LumiStreet gen2
- Model: BGP291 LED51-4S/740 II DM11 CLO 48/60S
- Light Source: LED module 5100 lm, 740 neutral white
- Safety Class: II
- Distribution: Medium 11
- Side-entry Diameter: 48 to 60 mm
Product Usage Instructions
Operating Information
- Input Voltage: 220 to 240 V
- Line Frequency: 50 to 60 Hz
- Power Consumption: 30.5 W
- Power Factor: 0.98
Approval and Application
- Ingress Protection Code: IP66 (Dust penetration-protected, jet-proof)
- Mech. Impact Protection Code: IK08 (5 J vandal-protected)
- Surge Protection Level: Up to 6 kV differential mode and 8 kV common mode
- Safety Class: II
Frequently Asked Questions (FAQ)
-
Q: Is the LumiStreet gen2 suitable for outdoor use?
A: Yes, the LumiStreet gen2 is designed for outdoor applications with its IP66 rating for dust penetration protection and jet-proofing. -
Q: What is the warranty period for the product?
A: The LumiStreet gen2 comes with a 5-year warranty period, providing you peace of mind regarding its performance and durability. -
Q: Can the light output be dimmed?
A: The product features a dimmable driver and constant light output regulation, allowing you to adjust the brightness as needed.
INTRODUCTION
LumiStreet gen2 Micro, LED module 5100 lm, 740 neutral white, Safety class II,
Distribution medium 11, Side-entry for diameter 48 to 60 mm
Increasing numbers of municipalities are having to upgrade large-scale
conventional street lighting installations with energy efficient LED
technology. But they are having to do this with smaller and smaller budgets.
That’s why the new generation of LumiStreet has been upgraded and designed to
provide a solution to this challenge, it is the ideal solution for performing
point-to-point replacement of conventional lighting. LumiStreet gen2 achieves
this by offering high efficiency, low Total Cost of Ownership, and ease of
installation and maintenance. The ease of installation and maintenance is
enabled by the Philips Service tag. Moreover, the Philips SR (System Ready)
socket makes it future-ready and you can pair this luminaire with lighting
control and software applications such as Interact City.
Product data
General Information
- Lamp family code LED51 [LED module 5100 lm]
- Light source replaceable Yes
- Number of gear units 1 unit
- Driver included Yes
- **Remarks *** At extreme ambient temperatures the luminaire might automatically dim down to protect components
- Light source engine type LED
- Service tag Yes
- Product family code BGP291 [LumiStreet gen2 Micro]
- Lighting Technology LED
- Value ladder Specification
- Serviceability class Class A, luminaire is equipped with serviceable parts (when applicable): LED board, driver, control units, surge protection device, optics, front cover and mechanical parts
Light Technical
- Upward light output ratio 0
- Luminous Flux 4,350 lm
- Standard tilt angle posttop 0°
- Standard tilt angle side entry 0°
- Luminous Efficacy (rated) (Nom) 147 lm/W
- Correlated Color Temperature (Nom) 4000 K
- Color rendering index (CRI) 70
- Light source color 740 neutral white
- Optical cover type Flat glass
- Luminaire light beam spread 160° – 42° x 54°
- Optic type outdoor Distribution medium 11
Operating and Electrical
- Input Voltage 220 to 240 V
- Line Frequency 50 to 60 Hz
- Initial CLO power consumption 31 W
- Average CLO power consumption 31.5 W
- End CLO power consumption 31.5 W
- Inrush current 21 A
- Inrush time 0.225 ms
- Power Consumption 30.5 W
- Power Factor (Fraction) 0.98
- Connection 2 Push-in connector 5-pole
- Cable –
- Number of products on MCB of 16 A type B 30
Temperature
- Ambient temperature range -40 to +50 °C
Controls and Dimming
- Dimmable No
- Driver/power unit/transformer Power supply unit regulating with constant light output
- Control interface –
- Constant light output Yes
Mechanical and Housing
- Housing Material Aluminum die cast
- Reflector material Polycarbonate
- Optic material Polymethyl methacrylate
- Optical cover material Glass
- Fixation material Aluminum
- Housing Color Gray
- Mounting device Side-entry for diameter 48 to 60 mm
- Optical cover shape Flat
- Optical cover finish Clear
- Overall length 520 mm
- Overall width 234 mm
- Overall height 95 mm
- Effective projected area 0.0235 m²
- Dimensions (Height x Width x Depth) 95 x 234 x 520 mm
Approval and Application
- Ingress protection code IP66 [Dust penetration-protected, jet-proof]
- Mech. impact protection code IK08 [5 J vandal-protected]
- Surge Protection (Common/Differential) Luminaire surge protection level until 6 kV differential mode and 8 kV common mode
- Sustainability rating Lighting for circularity
- Protection class IEC Safety class II
- Flammability mark For mounting on normally flammable surfaces
- CE mark Yes
- ENEC mark ENEC plus mark
- Warranty period 5 years
- EU RoHS compliant Yes
Initial Performance (IEC Compliant)
- Luminous flux tolerance + /-7%
- Initial chromaticity (0.381, 0.379) SDCM <5
- Power consumption tolerance + /-10%
- Init. Color Rendering Index Tolerance + /-2
Over Time Performance (IEC Compliant)
- Driver failure rate at 5000 h 0.5 %
- Control gear failure rate at median useful life 50000 h 5 %
- Control gear failure rate at median useful life 100000 h 10 %
- *Lumen maintenance at median useful life 50000** h L100
- *Lumen maintenance at median useful life 100000** h L100
Application Conditions
- Performance ambient temperature Tq 25 °C
- Maximum dim level 0% (digital)
Product Data
- Order product name BGP291 LED51-4S/740 II DM11 CLO 48/60S
- Full product name BGP291 LED51-4S/740 II DM11 CLO 48/60S
- Full product code 871951410128900
- Order code 910925866864
- Material Nr. (12NC) 910925866864
- Numerator – Quantity Per Pack 1
- Net Weight (Piece) 4.000 kg
- EAN/UPC – Product/Case 8719514101289
- Numerator – Packs per outer box 1
- EAN/UPC – Case 8719514101289
Dimensional drawing
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
www.lighting.philips.com
2024, May 27 – data subject to change
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>