VANCO 3016374 Mini Wireless Charger with Magnet User Manual
- June 14, 2024
- VANCO
Table of Contents
VANCO 3016374 Mini Wireless Charger with Magnet
Specifications
- Product Name: Mini Wireless Charger with Magnet 3016374
- Compliance: FCC radiation exposure limits for an uncontrolled environment
- Minimum Distance: 20cm between the radiator and body during installation and operation
FAQs
- Q: Is this charger compatible with all Qi-enabled devices?
- A: Yes, this charger is designed to work with Qi-compatible devices.
- Q: Can the magnet affect my device’s functionality?
- A: The magnet is positioned to facilitate charging and should not interfere with your device’s functionality.
Product Diagram
Note:
- Standby Mode: Light is red
- Charging Mode: Light is blue
- FOD Mode: Red and blue lights blink alternately
PRODUCT USING INSTRUCTION
- User Instruction: 1. Connect with the wall charger
- When using this product, please plug the type-C connector into the charger to ensure it is in standby mode.
- Note: To get the best charging effect, please use the adapter that meets the QC2.0, QC3.0 or QC4.0 standard. To save energy and extend the product life, please cut off the power when your phone is fully charged to avoid wasting energy.
- Attention: For safety reasons, please do not use any adaptor that is under 5V/1A.
- User Instruction: 2. Charging your iPhone
- Please fit the product with the back of your iPhone, it will charge your iPhone automatically via the built-in magnetic wireless charging, Max to be 15W.
- Note:
- Under normal charging conditions, the charger and mobile phone could be slightly hot; the temperature may rise if the mobile phone is working while charging (such as playing video).
- Please stop charging your phone when the charger is overheating. Our product will automatically stop charging when overheating. Please try it again when it’s cooling down.
Before Using
Remark:
- When the surface gets dirty, please wipe it with a damp cloth and dry it before using it.
- Please remove foreign objects on the surface before using, such as coins, pins, keys and other metal objects.
FCC
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Note: For best performance and safety, please read this manual carefully before using the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>