Sensata STA79 PreView Radar User Manual
- June 12, 2024
- Sensata
Table of Contents
Sensata STA79 PreView Radar
Product Information
- Manufacturer: Sensata Technologies
- Product Name: PreView Radar
- Address: 10335 W Emerald St. Boise, Idaho 83704
- Contact: Phone: 208-323-1000 | Fax: 208-323-1034
- Website: www.preco.com
- FCC ID: OXZSTA79
- IC: 20379-PVSTA79
Specifications
- Compliance: Industry Canada license-exempt RSS standard(s)
- RF Radiation Exposure: FCC and ISED RF Radiation exposure limits
- Separation Distance: At least 20cm between the radiator and the body
Product Usage Instructions
- Installation: Ensure the device is installed with a separation distance of at least 20cm between the radiator and your body.
- Operation: Do not co-locate or operate the device with any other antenna or transmitter.
- Maintenance: Regularly check for any changes or modifications that are not approved by the manufacturer.
RF Radiation Exposure Statement
This equipment complies with FCC and ISED RF Radiation exposure limits set forth for an uncontrolled environment. The device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
Warning
Changes or modifications not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note
The term IC before the radio certification number only signifies that Industry Canada technical specifications were met.
FAQ
Q: How far should the separation distance be maintained?
A: The separation distance should be at least 20cm between the radiator and your body.
Q: What should I do if I need to make changes to the device?
A: Any changes or modifications must be approved by the manufacturer to ensure compliance and user authority.
User Manual Statement
The device under test is manufactured by the grantee Sensata Technologies, and sold as an both OEM and after-market product, depending on customer needs. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure the end-user has all applicable / appropriate operating instructions. When end- user instructions are required, as in the case of this product, the grantee must notify the OEM to notify the end-user. Sensata Technologies will supply this document to the reseller/distributor dictating what must be included in the end user’s manual for the commercial product.
- FCC ID: OXZSTA79
- IC: 20379-PVSTA79
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
RF Radiation Exposure Statement
This equipment complies with FCC and ISED RF Radiation exposure limits set
forth for an uncontrolled environment. This device and its antenna must not be
co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a normally maintained
separation distance of at least 20cm between the radiator and your body.
WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met.