AUTOBACS EAGLE-i 4.1k 4K Dash Cam User Guide

AUTOBACS EAGLE-i 4.1k 4K Dash Cam

Product Usage Instructions

Important Notes

• Never attempt to disassemble, repair, or modify the unit as it will void the warranty.
• Avoid using harsh chemicals or solvents for cleaning; use a damp soft cloth instead.
• Avoid exposure to dust or sand to prevent affecting the unit’s functions.
• Use a microfiber cloth to clean the lens to prevent scratching.

Mounting

Use the provided windshield mounting bracket to securely attach the dash cam to your vehicle’s windshield.

Power Input

Connect the dash cam to a power source using the Micro USB port with a 5V power input.

Recording

Insert a micro SD card into the designated slot for recording video footage in 4K resolution.

WiFi Connectivity

The dash cam is WiFi-enabled, allowing you to connect it to your smartphone for easy access and control.

Frequently Asked Questions

Q: Can I use any micro SD card for recording?

A: It is recommended to use a high-quality micro SD card with sufficient storage capacity for optimal performance.

Q: How do I clean the lens of the dash cam?

A: Use a microfiber cloth to gently clean the lens and avoid scratching it.

Q: Can I view the recorded footage on my smartphone?

A: Yes, you can connect the dashcam to your smartphone via WiFi to view and download the recorded footage.

DISCLAIMER:

1. Please read the set-up and usage instructions carefully before operation.
2. Do not install this product in a way that will obstruct the driver’s vision.
3. You should not change the dash cam’s setting or mode of operation when the vehicle is in motion.
4. Please install it where the device is not exposed to moisture. The unit is not designed with protection from water ingress.
5. Do not leave the device in direct sunlight for extended periods or where the temperature could rise above 60°.
6. Monthly maintenance of the SD card is suggested: (A) Check that the card is functioning. (B) Reformat card to avoid file fragmentation. If the card is not functioning, the unit may freeze or may be unpredictable in operation.
7. Always keep your attention on driving your vehicle. Do not try to operate the device or use the APP while driving. Park the car safely before any adjustments are to be made.

NOTE:

1. Never attempt to disassemble, repair or make modifications to your unit; this will void your warranty.
2. Do not use harsh chemicals or solvents. To clean this unit use a damp soft cloth.
3. Please limit exposure to dust or sand ingress, this may affect the functions of the unit.
4. Please only use a microfibre cloth for cleaning the lens to avoid scratching the lens.

FRONT CAMERA

1. 3M Adhesive mounting bracket
2. Front camera lens
3.  Power/Recording indicator light (Red)
4. GPS status light (Green)
5. Microphone
6. Reset button
7. Micro SD Slot
8. Micro USB port (5V power input)
9. Rear camera input
10. WiFi button & WiFi indicator light (Blue)

KEY AND FUNCTIONS

WiFi

| Turn on/off WiFi| Press and hold the WiFi button for 3 seconds to turn the WiFi on/off.
Switch between 2.4GHz and 5GHz WiFi bands| Triple-press the WiFi button to change the WiFi Band
“Format SD card”| “Press and hold the WiFi button for 10 seconds to format the SD card”

INDICATOR LIGHTS

• WiFi indicator light (Blue): The blue light will be on when WiFi is on, and the blue light will be off when WiFi is off.
• Power/Recording indicator light (Red): The red light will be on while the unit is powered on and not recording. The red light will flash while recording.
• GPS status light (Green): The green light will be on while a GPS signal is being received.

PRECAUTIONS

1. Before the installation, please check that all the accessories are in the box, and test that the system is functional.
2. Please do not turn on vehicle accessory power until installation is complete.
3. A dash cam will automatically turn on when vehicle accessory power is on. Turn on the unit and check the function of the cameras.

INSTALLATION GUIDE

1. Turn off the car engine

2. Insert the micro SD card into the micro SD slot on the dash cam.

   • [Note] Check that the speed class of the micro SD card is designed for continuous recording and that the capacity is in between 8GB and 128 GB. The micro SD card must be formatted in the dash cam after being inserted (press and hold the WiFi button for 10 seconds). Make sure the unit is off when removing or inserting the SD card. If the SD card is removed while recording this will damage the file being saved and may permanently damage the SD card.

3. Choose a mounting position that will not obstruct the driver’s vision or airbags and then ensure that the mounting surface is clean of any debris or residue. Peel the sticker off the dash cam bracket to expose the adhesive pad and stick the dash cam to the windshield in a position near the rear-view mirror that will not obstruct the driver’s vision.

4. Connect the power cable to the micro USB port on the dash cam, then run the cable up to and along the edge of the windshield/roof lining, then down the windshield/A-pillar, around the passenger foot-well and into the cigarette socket
   (car charger) or fuse box (hardwire kit).

5. Start the engine and test the system. The angle of the dash cam and rear camera can be adjusted up or down. Check if the angle needs to be adjusted using the live-view function in the app.

SPECIFICATIONS

• Display: No
• Image Sensor: 8MP Sony STARVIS IMX415
• Resolutions: UHD 4K 3840 x 2160 30fps QHD 2K 2560 x 1440 30fps FHD 1920 x 1080 30fps
• Lens: 4G Element Glass
• Lens Diagonal Viewing Angle: 135°
• Memory Support: Up to 1 x 128GB Micro SD Card
• Micro SD: Includes 128GB SanDisk High Endurance
• WiFi: Dual Band 2.4GHz & 5GHz
• App: Yes, “AUTOBACS DRIVE” App
• GPS Function: Yes
• Mapping Data: Route, Speed
• Night Vision: WDR (Wide Dynamic Range)
• G-Sensor: Yes
• Parking Monitoring: Yes
• Seamless Loop Recording: Yes
• Video Format: MP4
• Power Supply: 12/24V Cig Power Lead
• Hard Wiring Kit: Input: 10-30V DC, Output: 5VDC 2A
• Low voltage protection: 11.9V/23.9V 3 Fuse Taps
• Input 0.5m + Output 3.5m Cable length
• Built-In Battery: No
• Operating Temp: -20°C ~ +60°C
• Dimensions: Front: 98 x 29 x 43.8mm
• Rear: 50 x 19 x 31mm

APP OPERATION INSTRUCTIONS

Android

• Open “Google Play”. Search for “Autobacs Drive” to download and install APP.

iOS

• Open “Apple Store”. Search for “Autobacs Drive” to download and install APP.

WiFi Connection

• Open your smartphone WiFi settings and select Dash Cam Network: EAGLE-i
• Password to connect: 88889999.
• Once connected, launch the APP to see live video, track your journey, change camera settings or download captured footage and photos.

TROUBLESHOOTING

• Under normal operating conditions, if there are problems with the device, please refer to the following methods to solve them.
• Unable to record video or take a snapshot: Please check SD card may be full of protected files. Delete some files or reformat cards.
• Recording stops unprovoked: Check SD card may be incompatible with the device, check the speed and class of the SD card or SD card may be damaged if in constant use for more than six months, try a newer SD card.
• wrong file” shown on LCD when photo/video is played back: SD card storage error, please format your SD card.
• Fuzzy image: Please check if the lens stays with dirt, and fingerprints & and clean the lens with a microfibre cloth.
• The image appears dark or washed out: Check the “WDR” setting in the menu.
• Horizontal stripes of light and dark in the image: Adjust the “Anti Flicker” setting in the menu
• The unit has frozen: Press and hold the WIFI/Reset button (#9 on page 6) for 8 seconds to reset the unit. Reformat the SD card in the APP. Replace the SD card if faulty.
• Not connecting to phone: Turn off Mobile Data in your phone’s settings and try again.”.

WARRANTY

• In the unlikely event that some technical difficulty arises with your purchase, be assured that we are most anxious to see that the problem is quickly rectified to your satisfaction. Please familiarise yourself with the following simple conditions of our warranty.
• This warranty covers faults through component failure or failure of the product to operate under published specifications.
• Product failure as a result of unreasonable environmental conditions, accident, misuse, improper installation, unauthorised repair, vehicle electrical or wiring faults or neglect etc, will not be covered by this warranty.
• Removal and installation costs, if any, would be paid by the owner as well as any freight or postage costs of transporting the product to AUTOBACS AUSTRALIA PTY LTD and shall not be liable or responsible for any loss of use of this product or any form of consequential loss.

CONSUMER WARRANTY

• This product is warranted by AUTOBACS AUSTRALIA PTY LTD to be free from defects in materials and workmanship under NORMAL USE for THIRTY-SIX MONTHS from the date of purchase.

WITHIN 30 DAYS OF PURCHASE DATE:

• Please return the unit for replacement to our National Service Centre or the Retailer from here you made the purchase. All accessories must be included. Proof of purchase date must accompany the products.

AFTER 30 DAYS OF PURCHASE DATE:

Warranty repair and service is carried out by our National Service Centre. Repair and service will be carried out at no cost to the owner if proof of ownership and the date of purchase can be verified to the satisfaction of the authorised centre concerned with this repair. This proof should take the form of either:

• a) The warranty card accompanying this product, stamped and dated by the dealer.
• b) A Tax Invoice or Receipt showing full details of the original vendor, purchaser, model number and serial number.

COMMERCIAL WARRANTY

• A product used in or associated with a commercial application will carry a limited  TWELVE MONTHS warranty.
• An abnormal commercial application is one where usage, dust, vibration, heat/cold and other environmental conditions exist at an extreme level.
• Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
• You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
• Purchaser’s Name: ——————————–
• Purchaser’s Address: ——————————–
• Model Number: ——————————–
• Dealer Name: ——————————–
• Dealer Address: ——————————–
• Invoice/Sales Docket no: ——————————–
• Serial Number: ——————————–
• Date of Purchase: ——————————–

General Hints: To expedite service and prompt return of the equipment, please:

• a) Clearly describe the fault in detail
• b) Safely and securely pack the unit for transport
• c) Include your return address
• d) Provide proof of purchase date as outlined above

National Service Contacts:

• AUTOBACS AUSTRALIA PTY LTD
• Telephone: 1300 288 029
• Email:[email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>