WHALEPUMPS GT0810B Shower And Toilet Waste Pump Owner’s Manual
- June 12, 2024
- WHALEPUMPS
Table of Contents
WHALEPUMPS GT0810B Shower And Toilet Waste Pump
Specifications
- Models:
- GT0810B – 8 ltrs (2.1 US Gals)
- GT0812B – 16 ltrs (4.2 US Gals)
- GT0820B – 20 ltrs (5.3 US Gals)
- Part Number:
- GT0831B
- GT1610B
- GT1620B
- GT1631B
- GT2010B
- GT2012B
- GT2020B
- GT2031B
- Voltage: 12V / 24V d.c.
- Capacity:
- 8 ltrs (2.1 US Gals) – 1 sensor
- 16 ltrs (4.2 US Gals) – 2 sensors
- 20 ltrs (5.3 US Gals) – 2 sensors
- No. of Sensors:
- 8 ltrs – 2
- 16 ltrs – 1
- 20 ltrs – 2
- Electrical Connections: Tinned wire ends, 2 x Deutsch, 1x Deutsch DT06-3S-PO12
- Inlet Hose Connections: 25mm (1) x 2 AK1005
Product Usage Instructions
Installation
- Follow the clear visual cues for installation provided by the product.
- Use the drill locator ports for accurate drilling during installation.
Pump Connection
- Connect any 12V or 24V d.c. pump system (up to 20 amp with no relay required) to the integrated sensors for automatic pump control.
- Pumps can be top or side-mounted on the 20 ltr tank for convenience.
Sensor Wiring
- Wire the sensors as per the instructions provided in the manual.
- For double-switch models, the second sensor can be wired to a high-level alarm or a second pump for added functionality.
Maintenance
- Regularly check the lid and sensor array for any signs of wear or damage.
- Replace service kits (Lid & sensor array) as needed to ensure the proper functioning of the grey waste tank.
Frequently Asked Questions
- Q: Can the grey waste tank be used for both RVs and boats?
- A: Yes, the grey waste tank can be used in both RVs and boats due to its versatile design and durability.
- Q: What type of pumps can be connected to the grey waste tank?
- A: Any 12V or 24V d.c. pump system up to 20 amps can be connected without the need for a relay.
- Q: How do I know when the tank is nearing full capacity?
- A: The integrated sensors provide automatic pump control and can be wired to a high-level alarm for indication when the tank is nearing full capacity.
Introduction
UNIQUE ‘TRIPLE SEAL’ LID ISOLATES ELECTRONICS FROM THE HARSH GRAY WASTE ENVIRONMENT FOR ADVANCED DURABILITY
- Integrated sensors for automatic pump control – solid state switch protected against water ingress
- Easy wiring – connect any 12V or 24V d.c. pump system (up to 20 amp with no relay required)
- Ports shaped for drilling accuracy (8 ltr and 20 ltr tanks only)
- Double switch models – the second sensor can be wired to a high-level alarm or second pump
- Pumps can be top or side mounted on 20 ltr tank
Specifications
Models| | Gray Waste Tanks|
---|---|---|---
PART NUMBER| GT0810B| GT0812B| GT0820B| GT0831B|
GT1610B| GT1620B| GT1631B| GT2010B| GT2012B|
GT2020B| GT2031B
Voltage| 12V / 24V d.c.
Capacity| 8 ltrs (2.1 US Gals)| 16 ltrs (4.2 US Gals)| 20 ltrs (5.3 US
Gals)
No. of sensors| 1| 2| 2| 1| 1| 2| 1| 1| 2| 2| 1
Electrical connections| Tinned wire ends| 2 x Deutsch DT06- 3S-
PO12| 1x Deutsch DT06- 3S- PO12| Tinned wire ends| 2 x Deutsch DT06- 3S- PO12|
1x Deutsch DT06- 3S- PO12| Tinned wire ends| 2 x Deutsch DT06- 3S- PO12| 1x
Deutsch DT06- 3S- PO12
Inlet hose connections| 19mm (¾”) x 2, 25mm (1″) x 3, 38mm (1½”) x
3| 25mm (1″) x 4, 38mm (1½”) x 4
Outlet hose connections| 19mm (¾”) x 1, 25mm (1″) x 1| 25mm (1″) x 2
Materials| Tank: MDPE, Seals: EPDM/Neoprene, Monprene®, Lid: Glass-
filled Polypropylene, ABS, Polyurethane
Service kits (Lid & sensor array)| AK1005| AK1008| AK1007| AK1006|
AK1005| AK1007| AK1006| AK1005| AK1008| AK1007| AK1006
TYPICAL INSTALLATION
Documents / Resources
|
WHALEPUMPS GT0810B Shower And Toilet Waste
Pump
[pdf] Owner's Manual
GT0810B Shower And Toilet Waste Pump, GT0810B, Shower And Toilet Waste Pump,
Toilet Waste Pump, Waste Pump, Pump
---|---