Funistree H77 Phone Stand with Wireless Speaker User Manual
- June 10, 2024
- Funistree
Table of Contents
Funistree H77 Phone Stand with Wireless Speaker
Specifications
- Product Name: Phone Stand with Wireless Speaker
- Features: Wireless Speaker, Phone Stand
- Compatibility: Works with most smartphones
- Wireless Connectivity: Bluetooth
- Power Source: Rechargeable battery
- Color: Black
Charging:
Before first use, ensure the device is fully charged using the provided
charging cable. Connect the cable to a power source and the charging port on
the device.
Bluetooth Pairing:
Turn on the wireless speaker by pressing the power button. Activate Bluetooth
on your smartphone and search for available devices. Select the speaker from
the list to pair.
FAQ
Q: How do I know when the device is fully charged?
A: The device’s indicator light will turn solid green when fully charged.
THANK YOU
Thank you for choosing our product.
To make the best use of your new Phone Stand with Wireless Speaker, we invite
you to read these instructions before using it.
Note: Before using this product, please use the original charging cable
to charge the unit for 2-3 hours.
PRODUCT SPECIFICATION
- BT name: H77
- Power of speaker: 423W
- Type-C Input: DC 5V 1A
- Charging time: 2-3 hours
- Suitable for most smartphones
IN THE BOX:
- 1×Detachable Phone Stand with Speaker
- 1xHanging Rope
- 1×USB-C Charge Cable 1x Manual
PRODUCT DIAGRAM
KEY FUNCTION
- ON/OFF
- Play/Pause
- VOL-/Next
- VOL+/Previous
- Charging Indicator light
- Charging Port
TWO MODES AVAILABLE
- BT Mode
- Featuring an advanced BT chip, it delivers unparalleled HD audio quality from enjoying music to watching videos.
- White Noise Mode
-
10 SOOTHING SOUNDS
Ocean, piano song, brook,wind, campfire, rain, fan, bird, thunderstorm, heartbeat -
MEMORY FUNCTION
In White Noise Mode, automatically remember the last setting to give you a habitual sleep environment. -
TIMER SETTING
Set the timer for 15/30/60mins as needed to enjoy soothing sound.
SAFETY INSTRUCTION
- Dont place the product near heating equipment
- Dont disassemble or repair the product without authorization.
- When not in use, please unplug the product charger from the socket,to avoid draining battery life or causing damage.
CH ARGING YOUR DEVICE
- Connect the device to a USB power source.
- Use the cable that came with the device.
- Charging time is approximately 2-3 hours.
- Disconnect the device when fully charged.
- The red light will be on during the charging phase and will turn off when the device is fully charged.
FAQ
-
Can the phone holder support a tablet?
A:This phone stand with wireless speaker is mainly designed for mobile phones. A tablet may be too heavy for this holder. -
Q: Why does the speaker’s power run out so quickly?
A: Before the first use, we recommend fully charging the device using the original cable, which takes about 2 to 3 hours. -
Q: Is this speaker available via the USB-C port on the back, not just BT?
A:The audio transmission is only available via BT, and the
USB-C port on the back is only for device charging. -
Q: Why can’t the second device pair with the BT Speaker?
A: When using two devices with the same BT speaker, you need to switch off the BT function of the first device before connecting the second one. This will ensure that the second device can properly connect and function with the speaker.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. lf this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure condition without restriction.