MYGT BPB10 Black Shark Power Bank Instruction Manual
- June 10, 2024
- MYGT
Table of Contents
MYGT BPB10 Black Shark Power Bank
Device layout
- LED power indicator
- USB-C port, support input and output
- Function buttons
Specifications
- Product Name: Black Shark Power Bank
- Product Model: BPB10
- Battery capacity: 5000mAh/19.25Wh
- Rated capacity: 3000mAh (5V/2A)
- Battery Type: 5000mAh Li-ion Polymer Battery*1pc
- Type-C input: PD18W (DC5V-3A/9V-2A)
- Type-C output: PD20W (DC5V3A/9V2.22A/12V 1.67A)
- Wireless charging output: 5W/7.5W/10W/15W (Max)
- Total multi-port output: DC5V 2A, 10W (Max)
- Product size: 102.5669.1mm
Usage
Charging your mobile power
To charge the mobile power, plug the Type-C cable into the USB-C port and
connect the other end of the cable to a computer, car charger or wall charger
to charge the mobile power. While charging, the power indicator will flash and
show the remaining power level
Charging the device
Using the device’s charging cable (not included), connecting the device to
the USB-C output or the mobile power will automatically start charging the
device and the LED power indicator will show the remaining power of the mobile
power. When charging is complete, you can double-tap the button or turn off
the device automatically after 35 seconds.
- Click the power button to display the current power level
- Double-click the power button, the device turns off.
- Long press the power button to enter the low current mode, and long press again to exit the low current mode
This icon indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent the environment or human health from being damaged due to uncontrolled waste disposal, recycle responsibly to promote the sustainable reuse of material resources. To safely recycle your device, use retum and collection systems or contact the retailer from whom you purchase the device
EU Regulations
Hereby, [Blackshark Technologies (Nanchang) Co., Ltd.] desires that this
equipment is in compliance with Electromagnetic Compatibility Directive
2014/30/EU, The full text of the EU declaration of Conformity is available at
https://global.blackshark.com
Manufacturer: Room 815-1, 8th floor, Block A, Huajiang Building, No. 1 Tsinghua Science Park, No, 299, Yupingdong Street, Nanchang Economic and Technological Development Zone, Nanchang City, Jiangxi Province
FCC Caution.
Labelling requirements.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modification warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Information to the user.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.