Beijing Wiseasy Technology P5 Smart Payment Terminal User Guide
- June 3, 2024
- Beijing Wiseasy Technology
Table of Contents
Beijing Wiseasy Technology P5 Smart Payment Terminal
Product Details
- NFC Recognition Area: to recognize NFC card
- Printer Paper Cabin: to insert printing paper
- Indicators: indicating terminal working status
- Screen: display and touch operation
- Power: long press to power on/off, short press to activate or shut down the screen
- IC Card Slot: to swipe IC card
- Magnetic Card Reader: to swipe magnetic Card
- Scan: press this button to scan
- Charging Interface: to insert micro USB 5 pin plug of charger
- Speaker: to play sound
- Camera: scanning and photography
- Charging Base Connector: to connect with the charging base
- Battery Cabin: to place and protect the battery
Main Specifications
- Operation System: Android Ops
- CPU:Qualcomm Quad-Core
- Communications:TDD/FDD/wCDMA/HSPA GSM/EDGE/WIFI2.4+5G/
- Memory: 2G8 RAM,16GB ROM
- Screen: 5.5″LCD
- Camera:
- Front camera 2 Mega Fixed Focus(Optiona) Rear camera 5 Mega Auto Focus
- BT: BT4.0, Dual Mode
- Wi-Fi: WLAN802.1la/b/g/n/ac
- NFC: 13.56MHz
- Magnetic Card Reader: Track 1/2/3
- IC Card Reader: ISO7816,Encrypted Head
- PSAM Card Slot: 2 Slots
- SIM Card Slot: 2 Slot, 3V/1,8V
- Printer: 2 inch thermal printer, paper cabin diameter:40mm
- Battery: 7.4V.2620mAh, Li-polymer
Safety Alert
- Do not place the terminal in extremely hot or cold conditions,
- Do not place terminal together with computer disc, credit card, travel card or any other magnetic items; otherwise, the information stored in magnetic cards will be affected.
- Do not place the terminal in fire.
- Do not disassemble the terminal or any accessories by yourself.
- Please use a moist and anti-static cloth to clean the terminal screen.
- Warning: Please replace the batteries with the same type and rating to avoid battery explosion,
- Do not expose the battery in strong direct sunlight, near heat sources or any similar conditions,
- Please recycle or dispose of old, weak, or worn batteries in accordance with local, regional, or national law or regulation.
- Do not use detergent with chemical or scrub partide which may damage the terminal body or screen.
- Please keep the terminal in a safe place and avoid crush or squeeze that may cause a damage on screen or camera.
- When the user use the third party’s root tool or update with unauthorized operation system, it will bring risk to the normal operation system.
Open Printer LID
Step 1:
Step 2:
FCC Statement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the to operate the eauipmen nis device complies or
nerKues. operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired
operation,
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device., pursuant to part 15 of the FcC Rules, These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses ano
can delete Iloilo frequency energy ana, i, not installed dna used in
accordance with the instructions may cause harmful interference to radio
communications, However, there is no guarantee that interference will not
occur in a particular installation, this equipment does cause harmful
interference to radio or television reception, which can be aerermined by
turning the equipment o and on, tne user of the following measure:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the eceiver,
- and connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/Iv technician for help.
SAR statement
This equipment complies with FCC radiation exposure limits set TOrtn Tor an unconstrained environment. Ena user RE Pvnosra compliance This Transmitter mist not he cO-located or operating in conjunction with any other antenna or transmitter, The portable device is designed to meet the requirements or exposure to radio waves established by the FCC. Inese requirements set a SAR Limit of 1.6 WKg averaged over one gram of tissue, The highest SAR value reported under this standard during product certification for use when properly worn on the body,