Coaxial CT800HDA HD Video Monitor Tester User Manual

Coaxial HD Video Monitor Tester
User Manual

General

The new HD coaxial tester is developed for the on-site installation and maintenance of HD coaxial camera, having TVI, AHD. It also provides many useful functions, such as video display, PTZ control, DC12V output power, audio test, image generator, VGA video signal input, HDMI1.0 signal input, RS485 data searching, cable testing, high
precision digital multimeter, LED lamp etc.

Product Funtions

• Video signal testing

• Vedio monitor tester, High-resolution 5.0 inches 800 (RGB) x480 wide viewing angle display, Viewing angle larger, more intuitive and easy to display the camera image quality. Support PAL/NTSC standard video signal.

• PTZ controller
  Video monitor tester built-in Pelco-D / P PTZ control protocol, etc. , through its own RS485 interface, the user can control the PTZ up, down, left, right rotation, and adjust one machine zoom, focus, aperture size.

• Image generator
  Multi-format video OUT port image generator, sending a variety of standard (e.g. PAL, NTSC) color graphics section

• DC12V 1A output power
  Power the camera with DC12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available.

• Audio testing
  Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.

• Enhanced network cable testing
  By UTP CABLE TEST port on the meter, you can test the connection of network cable.

• VGA/HDMI input
  Support VGA/HDMI 1.0 video input, once connect VGA/HDMI video, please switch selector to select HDMI or VGA mode. The maximum resolution is 1920X1080

• TVI camera test (Optional) *
  HD TVI video surveillance testing, support 720p 25, 30, 50,60fps/ 1080p 25,30fps. When TVI signal input, the tester will display HD TVI camera image.

• AHD camera test (Optional) *
  HD video surveillance testing, support AHD 2.0 version, 720p 25,30fps/ 1080p 25,30fps. When AHD signal input, the tester will display the AHD camera image.

• High precision digital multimeter (Optional) *
  The tester built in high reliability digital multimeter with a stable performance, clear reading, can be used to measure DC voltage, AC voltage, DC current, AC current measurement accuracy, easy to use.

• LED lamp
  It is useful for the engineer to install and maintain security system at night. LED On/Off pressing button, easy to operate.

•  The battery graphic display
  The tester has advanced power control and protection circuit, low-power energy-saving, 4 to 5 hours on a single charge, can be used normally for 12 hours.

Product Accessories

• HD coaxial tester
• Adapter DC5V 1.5A（with USB cable）
• International Standard 18650 2600ma battery X 2
• BNC cable
• RS485 connector
• Multimeter test leads one pair of red and black (optional)
• Power output conversion cable
• Audio cable
• Lanyard
• Tool bag
• Instruction Manual

Operation

• Pressing key more than 3 seconds can turn on the tester.
• If the tester has turned on, pressing key more than 3 seconds can trun off the tester, can also set time off.
• When turn it on, press the key to enter the function menu, press key to quickly switches to the desired function menu.
• When turn it on, press the key to enter the function menu, select different function, and press the key to change the parameter value, press to save setting and exit menu.

• High precision digital multimeter (Optional)
  Press key to enter the function menu, continuously press key to switch page, to select entering “digital multimeter” UI.

Can measure:

1. DC voltage
2. AC voltage
3. DC current
4. AC current

• The black multimeter pen must insert “V-/A-” port, the red multimeter pen must insert “V+/A+” port.

1. The maximum current measurement is 5A
2. The maximum voltage measurement is 380V

Model HD coaxial tester Video Test

Signal mode| NTSC/PAL (Auto adapt)
Display| 5.0 inch VGA TFT-LCD, 800 ( RGB ) x 480
resolution
LCD adjustment| Brightness, Contrast, Saturation adjustable
Video IN/OUT| 1 channel BNC Input & 1 channel BNC Output
VGA/HDMI Test
VGA/HDMI Input| Support VGA/HDMI 1.0 video input, once connect VGA/HDMI video, please switch selector to select
HDMI or VGA mode. The maximum resolution is 1920X1080
PTZ Controller
Communication| Support RS485
PTZ Protocol| Compatible with protocols PELCO-D/P
Baud Rate| 600,1200, 2400, 4800, 9600, 14400bps
Video Signal Generation
Color bar generator| Support both PAL / NTSC format’ s standard color bar output (Red, Green, Blue, White, Black, Grey) and testing image output
UTP Cable Tester
UTP cable test| Display UTP cable connection status , cable type and the sequence of wires as well as read the number of the test box.
DC12V 1A Power Output
DC12V power output| Output DC12V1A power for camera
Audio Input Test
Audio input test| 1 channel audio signal input
TVI Test ( Optional )
TVI video signal test| 1 channel TVI input ( BNC interface ) , support 720p 25 / 30 / 50 / 60fps, 1080p 25 / 30fps
AHD Test ( Optional )
AHD video signal test| 1 channel AHD input (BNC interface ) , support AHD 2.0 version, 720p 25 / 30fps, 1080p 25 /30fps
Digital Multimeter (Optional) *
AC/DC Voltage| 0-660V auto/manual range, the min resolution is 0.1mV
AC/DC current| 660.0uA , 6.600mA, 66.00mA 1 660.0mA, 10.00A
POWER
Power Adapter| DC 5V ( 1.5A )
Battery| Built-in 18650 2600mA battery X 2
Rechargeable| After charging 3-4 hour, working time lasts 11 hours
Low Consumption| Energy saving , battery capacity indicator
Parameter
Operation setting| OSD menu, select your desired language: English, Chinese, etc
General
Working Temperature| -10t – +50t
Working Humidity| 30% – 90%
Dimension/Weight| 194mm x 112mm x 48mm / 540g

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>